Eriez Xtreme Bedienungsanleitung

Reference

Guide

ERIEZ MAGNETICS HEADQUARTERS: 2200 ASBURY ROAD, ERIE, PA 16506–1402 U.S.A.

WORLDAUTHORITYIN SEPARATIONTECHNOLOGIES

2017831A

(sw pkg 3.0.x)

Use this product only in the manner described in this manual. If the

equipment is used in a manner not specified by the manufacturer, the

protection provided by the equipment may be impaired.

CAUTION

The metal detector is heavy. Do not lift nor support the metal detector

by hand/manually.

To avoid damage or injury, use only the handling and installation

procedures outlined in this reference guide.

CAUTION

Hazardous voltages are present in this equipment when energized. All

power sources must be isolated or disconnected before accessing the

inside of the enclosure.

Failure to follow these precautions may result in serious injury or

death.

WARNING - HAZARDOUS VOLTAGE

If you have a pacemaker or other implanted medical device, please

consult your doctor before using this product. Electromagnetic waves

can interfere with the operation of your pacemaker or other medical

devices.

CAUTION

Metal detectors emit electromagnetic fields, which may interfere with

some pacemakers or other implanted medical devices. The end user

bears the responsibility to determine if the emitted electromagnetic

fields will affect employees with medical devices. If you have an

implanted medical device, please consult your doctor before being in

the vicinity of the metal detector during operation.

CAUTION

To avoid injury or damage to the equipment, only qualified service

technicians are to install the metal detector at customer sites in

accordance with local safety codes.

CAUTION

To avoid injury or damage to the equipment, all electrical installations

are to be performed by qualified and competent personnel authorized

by Eriez Manufacturing Company. All electrical installations are to be in

compliance with local safety codes. Ensure that all materials used in

the installation of the equipment are suitable and appropriate for

purpose.

CAUTION

For continued compliance with electrical safety standards, the

protective earth connection from the power source must be connected

directly to the protective terminal on the wall of the enclosure. This is

required to be the FIRST connection to the terminal, and secured with

a star lock washer and nut, independent of any other connections to

the terminal.

CAUTION

An external disconnect switch labeled “Metal Detector” must be

installed near the metal detector to allow the metal detector to be

completely disconnected from the power source during installation and

maintenance. All lock-out tag-out procedures and local safety codes

are to be followed during metal detector installation and maintenance.

The metal detector must not be positioned in a way that makes it

difficult to operate the disconnect switch.

CAUTION

Cleaning procedures may cause false trips of the metal detector,

resulting in actuation of any connected reject devices. Ensure

personnel and equipment are clear from the path of the reject devices

at all times. To avoid an unsafe condition or damage to equipment,

remove all power sources (including air supplies) from the metal

detector and reject devices prior to wash down.

CAUTION

To avoid injury or damage to the equipment, all electrical maintenance

on the metal detector is to be performed by qualified and competent

service technicians authorized by Eriez Manufacturing Company.

CAUTION

The XTREME metal detector is not designed nor intended for operation

in environments classified as hazardous locations/zones. Do not

operate the XTREME metal detector in areas where the possibility of

explosions or fires exists.

CAUTION

For installations where the metal detector control screen presents

ergonomic challenges or unsafe viewing conditions, it is recommended

that a remote display be used to eliminate these issues.

CAUTION

The metal detector will start automatically when power is restored after

a power interruption. All external components controlled by relays

within the metal detector control will also complete their cycle when the

metal detector is re-energized. The end user must determine if a

hazard exists and install the proper safety precautions and protocol to

ensure that an injury does not occur in the event of a power

interruption.

CAUTION

When cleaning the metal detector surfaces, use appropriate personal

protective equipment (PPE) for any physical/chemical/biological

hazards that may exist due to the end user’s production environment.

Avoid contact with contaminants on or around the metal detector.

Pressure Wash and sanitize metal detector surfaces when

maintenance is required.

CAUTION

EXPLANATION OF SYMBOLS

Cautionary information

Protective Conductor Terminal

Hazardous Voltage – Risk of Electric Shock

Pacemaker warning information

Pinch Point

Pg.7

Pg.9

Pg.13

Pg.23

Pg.33

Pg.83

Pg.97

Handling

Basic lifting and moving instructions

Specifications

Basic product specifications and safety information

Mechanical

Mechanical installation instructions

Electrical

Electrical Installation Instructions

User Interface

Every screen explained and easy to use how-to guides.

PLC Interface

PLC interface setup instructions

Maintenance

Maintenance and cleaning

Vertical Metal Detector

with Valve Addendum

Handling, installation and maintenance Pg.99

RF INTERFERENCE

Radio Frequency (RF) emissions have been tested to the requirements of FCC 47CFR

Part 18, and CISPR 11/EN 55011 (Class A, Group 2).

The Eriez Xtreme Metal Detector generates an electromagnetic field which has the

potential to escape. This field may interfere with nearby radio frequency equipment.

If interference becomes a problem you may need to:

1. Move the Metal Detector or interfering equipment

2. Change the frequency on the Metal Detector

3. Call the Factory for further assistance

HANDLING INSTRUCTIONS

DO NOT LIFT THE METAL DETECTOR BY INSERTING ANYTHING INTO OR

THROUGH THE TUNNEL. The inner surface of the tunnel protects the precisely

tuned electronic circuit and internal parts. The tunnel liner also protects the internal

parts against water damage. The integrity of this liner and seal must be maintained.

Any damage or distortion to this surface caused by handling will invalidate the

warranty.

When handling, keep the metal detector on the shipping pallet as long as possible.

When removing the detector from the shipping pallet LIFT ONLY ON THE DETECTOR

HOUSING SURFACES OR SUPPORTING FEET. DO NOT LIFT BY THE CONTROL

HOUSING THAT PROTRUDES FROM THE BODY OF THE METAL DETECTOR.

If possible lift the metal detector by using a crane and soft nylon slings running under

the entire metal detector housing as seen below. See Vertical Metal Detector with

Valve Addendum p99 at the end of this reference guide for information concerning

vertical metal detectors.

Larger metal detectors may have eyebolts preinstalled at the factory. When handling

with the eyebolts ensure loads are never applied perpendicular to the shank of the

eyebolts; they will break.

The metal detector is heavy. Do not lift nor support the metal detector

by hand.

To avoid damage or injury, use only the handling and installation

procedures outlined in this reference guide.

CAUTION

Never weld any attachment to the metal detector. Do not attempt to drill and/or tap the

metal detector for lifting or mounting attachments.

Inhaltsverzeichnis

Andere Eriez Metalldetektor Handbücher

Eriez

Eriez E-Z TEC IV Handbuch

Eriez

Eriez 1250 ANALOG Handbuch

Eriez

Eriez 1230 Handbuch

Eriez

Eriez X8 Bedienungsanleitung

Eriez

Eriez METALARM 3500 series Handbuch

Eriez

Eriez Metalarm HH-10 Handbuch

Beliebte Metalldetektor Handbücher anderer Marken

Garrett

Garrett MAGNASCANNER CS 5000 Bedienungsanleitung

Valex

Valex 1800200 Bedienungsanleitung

Gauss

Gauss MIL MD Bedienungsanleitung

Velleman

Velleman CS130 Bedienungsanleitung

Sears

Sears 321.596370 Bedienungsanleitung

Steinberg Systems

Steinberg Systems SBS-MD-22 Bedienungsanleitung

Zircon

Zircon MetalliScanner m60c Bedienungsanleitung

nalanda

nalanda MD027 Bedienungsanleitung

REV Ritter

REV Ritter CB-7005 Bedienungsanleitung

Minelab

Minelab F1A4 Bedienungsanleitung

Fisher Research Labs

Fisher Research Labs F70 Bedienungsanleitung

Steinberg Systems

Steinberg Systems SBS-MD-12 Bedienungsanleitung

GOLDEN MASK

GOLDEN MASK 5 Bedienungsanleitung

Grizzly

Grizzly YM 203 Bedienungsanleitung

Fisher Research Labs

Fisher Research Labs 1280-X Aquanaut Bedienungsanleitung

Treasure Cove

Treasure Cove Vibra-Probe 560 Bedienungsanleitung

Accurate Locators

Accurate Locators XL16 IMAGER Bedienungsanleitung

Teknetics

Teknetics G2 Bedienungsanleitung