Eryone Thinker S Bedienungsanleitung
Eryone Thinker S
User Manual
Technology service: technical@eryone.com
WhatsApp: +86 13670143392
Table of contents
Notices ············································4
1. Overview of Eryone Thinker S ························· 5
1.1A glance of Thinker S ····························· 5
2. Specifications ······································6
3. Printer assembly ····································7
4. First steps ·····································7
4.1Test before print ··································7
-Movement test ··································7
-Preheat hotend and heated bed ······················7
-Load the filament ································8
4.2 Levelling the 3d printer on manual·······················9
4.2.1 Levelling gantry frame····························9
4.2.2 Levelling the heated bed ··························10
5. Printing ··········································11
5.1 Install the driver ·································11
5.2 Setting your 3d printer ····························12
5.3 Load printing model ······························15
5.4 Slice the model ·································15
5.5 Printing via SD card ····························16
6. LCD layout ·······································17
7. Special function of Eryone Thinker S ·····················19
7.1 Magnetic and flexible printing surface ··················19
7.2 Super quiet ····································19
7.3Assembly finished within 10/20 minutes ················19
1
7.4 Large volume and high quality ·······················19
7.5 Power failure protection ···························20
7.6 Compatible with auto-leveling sensors ·················20
8. FAQ-Common assembly issues ························20
8.1 X carriage is loosen ······························20
8.2 Z axis stop moving or stick half way···················20
9. FAQ-Print problem ··································21
9.1 Filament can’t stick to the heated bed ·················21
9.2 Extruder under extrusion ···························21
10.FAQ-Error messages ·······························21
10.1 Mintemp error ·································21
10.2 Maxtemp error ·································22
10.3 Thermal runaway ·······························22
2
Notices
Safety compliance
The printer can be only used with the power adapters supplied by this company, or
the product maybe damaged, with a risk of fire. To avoid burning, or model
deformation, do not touch the model. Nozzle, or the platform by hand, or any other
part of the body, while the printer is working or immediately after it has finished
printing.
There is a slight smell from ABS when it is being extruded. The smell is, however, not
too unpleasant. Operation in a well-ventilated room but draught free. Draughts can
affect warping of ABS prints. When ABS is burnt is release toxic fumes.
Always have adult supervision when Children are present. Please keep small printed
parts away from young children, choking hazards! There are several safety issues,
small tools and HOT objects and most parts used in connection with the 3D printer.
Tie back long hair and loose clothing.
Check the power input of power supply unit. You can choose either 110V or 220V
according to the Power regulation in your country.
Protection
The printer must not be exposed to water or rain, or damage may occur.
Do not pull out the USB cable when loading a digital model, or the model data
maybe lost.
When using the Extruder function, keep at least 50mm between the nozzle and the
platform. If too close, the nozzle may get blocked.
The printer is designed to work properly at an ambient temperature between 15℃
and 30 ℃and humidity of between 20% and 50%; Operating outside those limits may
result in low quality models.
Legal
Eryone makes no warranty of any kind with regard to this material, including, but not
limited to, the implied warrants of merchantability and fitness for a particular purpose.
Eryone should not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use of this
material. Changes or modifications to the system not expressly approved by Eryone,
the party responsible for
3
compliance, could avoid the user`s authority for use. This document is protected by
copyright. All right reserved. No part of this document maybe photocopied,
reproduced or translated into another language without the prior written consent of
Eryone.
© Copyright 2018 Shenzhen Eryone technology Limited. All rights reserved.
4
Please carefully read and understand the contents of this user manual before you use Eryone
Thinker S. Failure to read the manual may lead to personal injury, damage to Thinker S.
Learn everything about Using your Eryone Thinker S by following the instructions in this user
manual, you will find that using 3D printer is such an easy thing.
You might be familiar with 3D printers; however, it is still essential to read this user manual carefully
in order to make you understand Eryone Thinker S well.
1.1 A Glance of Thinker S
1. Overview of Eryone Thinker S
1. Base Frame
2. Printing Surface
3. Extruder
4. Gantry Frame
5. Z Stepper Motor
6. Y Stepper Motor
7.Z axis Limit Switch
8.X Stepper Motor
9. X axis Limit Switch
10. Extruder stepper motor
11. PSU
12. Motherboard
13. PSU Port
14. LCD Display
15. Filament Holder
16. Power Switch
4
14
13
11
16
7
15
3
10
12
6
9
8
2
5
1
5
Printing
Print technology
Build Volume
Printing Precision
Positioning precision
Filament diameter
Default Nozzle diameter
Printing Speed
Fused Deposition Modeling
300mm x 300mm x 400mm
0.05mm
12.5
μm / 12.5μm / 2.5μm
1.75mm
0.4mm
30mm/s~145mm/s
Software
Supported Software
Printing file types
Supported OS
Cura
, Simpfily3D, Pursa slicer3r,
Repetier
-host,etc
*.
gco,*.gcode
Windows/MAC/Linux
Electrical
AC Input
DC Output
Connectivity
100
-240V
24V/ 500W
USB cable/Stand
-alone SD card
printing
Physical dimensions
Desktop space
Shipping dimension
Shipping weight
510*415*660mm
660 x 580 x 256mm
16kg
Temperature
Nozzle Max temp
heated bed Max temp
250
℃
100
℃
Sound
Average operational noise
49dBA
2. Specifications
6
3. Printer Assembly
For the Eryone Thinker S 3d printer, we suggest you following the
“Eryone Thinker S Quick Starter Guide “
After a successful completion, continue to the next step.
4. First steps
4.1Test before print
About the LCD layout, you can refer chapter 6.
-Movement test
Click LCD button :
LCD→Prepare→Auto home
Then the 3d printer all axis will home all axis by hitting the limit switch.
-Preheat hotend and heated bed
Click LCD button:
LCD→Prepare→Preheat PLA→Preheat PLA
Then the 3d printer hotend and heated bed will heat to the correct
temperature.
7
-Load the filament
Note: The extruder will not work until the temperature
is higher than 170℃.(Temperature protection feature)
Preheat your hotend at first. Click your LCD button→Prepare→Preheat PLA End.
Insert filament into the Teflon tube. When the filament goes though extruder block,
with one hand press the handle, make sure the filament can go though the slot of
the gear, then guide filament in by hand till filament starts to string from the hotend.
After pushing the filament into the bottom of hotend, click LCD
button→Prepare→Auto home
8
When homing the axis is finished. You can click LCD button→Prepare
→Change filament
Choose “Preheat PLA” the hotend will heating then you need to click
the LCD button to continue.
You can click” Purge more” a few times till the filament comes out of
the nozzle.
4.2 Levelling the 3d printer on manual mode
To make 3d printer have better printing result, levelling bed before
printing.
You can refer to these steps to levelling the 3d printer.
4.2.1 Levelling gantry frame
Before you levelling the heated bed, please make sure gantry frame is
perpendicular to Z axis aluminum extrusions, you can calibrate the
couplers to make the frame same scale on both Z axis aluminum
extrusions.
9
Inhaltsverzeichnis
Andere Eryone 3D-Drucker Handbücher
