Esatto EWAC36RC Bedienungsanleitung

User Mnul

Exactly what

you need

Model Code/s:

EWAC36RC

Online:

esatto.house

Product:

Window Air-Conditioner

User Manual esatto.house2 3

Page 4

Welcome

Page 5

Safety Warnings

Page 8

Your Air

Conditioner

Page 9

Operation

Instructions

Page 11

Installation

Instructions

Page 18

Troubleshooting

Page 19

Specications

Page 20

Warranty

Information

Page 22

Receipt

Page 19

Purchase Details

ContentsApplinces

Exactly what

you need

User Manual esatto.house4 5

Welcome Safety Warnings

Congratulations on purchasing your new air conditioner. The Esatto brand is proudly

distributed within Australia by Residentia Group Pty Ltd.

Please refer to the warranty card at the rear of this manual for information regarding your

product’s parts and labour warranty, or visit us online at: www.residentiagroup.com.au

At Residentia Group, we are customer obsessed and our Support Team are there to

ensure you get the most out of your appliance. Should you want to learn more about your

unit such as the various temperature guides or importantly taking care of the appliance,

our Support Team are here to help.

You can use our online Support Centre at any time by visiting:

→ http://support.residentiagroup.com.au

Or you can contact us via phone by dialling: 1300 11 HELP (4357).

It is important that you read through the following use and care manual thoroughly to

familiarise yourself with the installation and operation requirements of your appliance

to ensure optimum performance.

Again, thank you for choosing an Esatto air conditioner and we look forward to being

of service to you.

Kind Regards,

The Residentia Team

Residentia Group

—

Head Office

165 Barkly Avenue

Burnley Victoria

Australia 3121

—

ACN

600 546 656

—

Online

residentia.group

—

Postage

PO BOX 5177

Burnley Victoria

Australia 3121

—

Telephone

1300 11 4357

—

suppor[email protected]

IMPORTANT: Please ensure that you read the entire

instructions carefully before beginning the installation

of your air conditioner. Always retain this instruction

user manual.

WARNING: To prevent injury to the user or other people

and property damage, the following instructions must

be followed. Incorrect operation due to ignoring of

instructions may cause damage or serious harm.

• Plug in power plug properly. Otherwise, it may cause

electric shock or re due to excess heat generation.

• Do not operate or stop the unit by inserting or

pulling out the power plug. It may cause electric

shock or re due to heat generation.

• Do not damage or use an unspecied power cord. It

may cause electric shock or re. If the power cord is

damaged, it must be replaced by the manufacturer

or an authorised service centre or a similarly

qualied person in order to avoid a hazard.

• Do not modify power cord length or share the outlet

with other appliances. It may cause electric shock

or re due to heat generation.

• Do not operate with wet hands or in damp

environment. It may cause electric shock.

• Do not direct airow at room occupants only. This

could damage your health.

• Always ensure eective earthing. Incorrect earthing

may cause electric shock.

• Do not allow water to run into electric parts. It may

cause failure of machine or electric shock.

• Always install circuit breaker and a dedicated

power circuit. Incorrect installation may cause re

and electric shock.

• Unplug the unit or disconnect the power supply to

the unit, if strange sounds, smell, or smoke comes

from it. It may cause re and electric shock.

• Do not use the socket if it is loose or damaged.

It may cause re and electric shock.

• Do not open the unit during operation. It may cause

electric shock.

• Leave the door closed while the air conditioner is

running. It is not designed to cool the entire house.

• Do not use the power cord close to heating

appliances. It may cause re and electric shock.

• Do not use the power cord near ammable gas or

combustibles, such as gasoline, benzene, thinner,

etc. It may cause an explosion or re.

• Ventilate room before operating air conditioner if

there is a gas leakage from another appliance.

It may cause explosion, re and burns.

• Do not disassemble or modify unit. It may cause

failure and electric shock.

• When the air lter is to be removed, do not touch

the metal parts of the unit. It may cause an injury.

• Do not clean the air conditioner with water.

Water may enter the unit and degrade the

insulation. It may cause an electric shock.

• Ventilate the room well when used together with a

stove, etc. An oxygen shortage may occur.

• When the unit is to be cleaned, switch o, and

turn o the circuit breaker. Do not clean unit when

power is on as it may cause re and electric

• shock, it may cause an injury.

• Do not put a pet or house plant where it will be

exposed to direct air ow. This could injure the pet

or plant.

• Do not use for special purposes. Do not use this

air conditioner to preserve precision devices,

food, pets, plants, and art objects. It may cause

deterioration of quality, etc.

• Stop operation and close the window in storm or

hurricane. Operation with windows opened may

cause wetting of indoor and soaking of household

furniture.

• Hold the plug by the head of the power plug when

taking it out. It may cause electric shock and damage.

• Turn o the main power switch when not using the

unit for a long time. It may cause failure of product

or re.

• Do not place obstacles around air-inlets or inside

of air-outlet. It may cause failure of appliance or

accident.

• Always insert the lters securely. Clean lter once

every two weeks. Operation without lters may

cause failure.

• Ensure that the installation bracket of the outdoor

appliance is not damaged due to prolonged

exposure. If bracket is damaged, there is concern of

damage due to falling of unit.

• Do not use strong detergent such as wax or

thinner but use a soft cloth. Appearance may be

deteriorated due to change of product colour or

scratching of its surface.

• Do not place heavy object on the power cord and

ensure that the cord is not compressed. There is

danger of re or electric shock.

• Do not drink water drained from air conditioner.

It contains contaminants and could make you sick.

• Use caution when unpacking and installing. Sharp

edges could cause injury.

• If water enters the unit, turn the unit o at the

power outlet and switch o the circuit breaker.

Isolate supply by taking the power-plug out or

disconnect the power supply to the unit, and

contact a qualied service technician.

User Manual esatto.house6 7

Safety Warnings (Continued)

• This appliance can be used by children aged from

8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given

supervision or instruction concerning use of the

appliance in a safe way and understand the hazards

involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made

by children without supervision (be applicable for

the European Countries ).

• This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety. (be applicable

for other countries except the European Countries )

• Children should be supervised to ensure that they

do not play with the appliance.

• If the supply cord is damaged, it must be replaced

by the manufacturer, its service agent or similarly

qualied persons in order to avoid a hazard.

• The appliance shall be installed in accordance with

national wiring regulations

• Do not operate your air conditioner in a wet room

such as a bathroom or laundry room.

• The appliance with electric heater shall have at

least 1 meter space to the combustible materials.

• Contact the authorised service technician for repair

or maintenance of this unit.

• Contact the authorised installer for installation of

this unit.

• When there are wide dierences between

“USER’S MANUAL and “Remote controller

Illustration” on function description, the description

on “USER’S MANUAL” shall prevail.

• If the air conditioner is knocked over during use,

turn o the unit and unplug it from the main power

supply or disconnect the power supply to the unit,

immediately. Visually inspect the unit to ensure

there is no damage.

• If you suspect the unit has been damaged, contact

a technician or customer service for assistance.

• In a thunderstorm, the power must be cut o to

avoid damage to the machine due to lightning.

• To reduce the risk of re or electric shock, do not

use this fan with any solid-state speed control

device.

• Do not run cord under carpeting. Do not cover

cord with throw rugs, runners, or similar coverings.

Do not route cord under furniture or appliances.

Arrange cord away from trac area and where it

will not be tripped over.

• If connecting power to xed wiring, an all-pole

disconnection device which has at least 3mm

clearances in all poles, and have a leakage current

that may exceed 10mA, the residual current

device(RCD) having a rated residual operating

current not exceeding 30mA, and disconnection

must be incorporated in the xed wiring in

accordance with the wiring rules.

• How to x the appliance to its support, please read

the “installation instructions” section in this manual.

• All wiring must be performed strictly in accordance

with the wiring diagram located inside of the unit.

• The unit’s circuit board(PCB) is designed with a fuse

to provide overcurrent protection. The specications

of the fuse are printed on the circuit board, such as:

T 3.15A/250V, etc.

PRIOR TO OPERATION

1. Contact an installation specialist for installation.

2. Plug in the power plug properly.

3. Do not use a damaged or non-standard power cord.

4. Do not share the same outlet with other appliances.

5. Do not use an extension cord.

6. Do not start/stop operation by plugging/unplugging

the power cord.

USAGE

1. Exposure to direct airow for an extended period

of time could be hazardous to your health. Do not

expose occupants, pets, or plants to direct airow

for extended periods of time.

2. Due to the possibility of oxygen deciency, ventilate

the room when used together with stoves or other

heating devices.

3. Do not use this air conditioner for non-specied

special purposes (e.g. Preserving precision devices,

food, pets, plants, and art objects). Usage in such a

manner could harm such property.

CLEANING AND MAINTENANCE

1. Do not touch the metal parts of the unit when

removing the lter. Injuries can occur when handling

sharp metal edges.

2. Do not use water to clean inside the air conditioner.

Exposure to water can destroy the insulation,

leading to possible electric shock.

3. When cleaning and maintenance the unit, rst make

sure that the power and circuit breaker are turned o.

OPERATING TEMPERATURE

1. Do not touch the metal parts of the unit when removing the lter. Injuries can occur when handling sharp

metal edges.

2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation, leading

to possible electric shock.

3. When cleaning and maintenance the unit, rst make sure that the power and circuit breaker are turned o.

Cooling operation Outdoor temp 18–43ºC/64–109ºF (18–52ºC/64–125ºF for special tropical models)

Indoor temp 17–32ºC/62–90ºF

Heating operation Outdoor temp -5–24ºC/23–76ºF

Indoor temp 0–27ºC/32–80ºF

NOTE: Performance may be reduced outside of these operating temperatures.

AUTORESTART ON SOME MODELS

1. If the unit breaks o unexpectedly due to the power cut, it will restart with the previous function setting

automatically when the power resumes.

2. Wait 3 minutes before resuming operation

3. After the unit has stopped, it cannot be restarted operation in the rst 3 minutes. This is to protect the unit.

Operation will automatically start after 3 minutes.

WARNING: Before installing, remove all packaging from inside the carton, along with any inserts placed into the

side louvers.

The inserts are found

in the side louvers

Remove inserts

User Manual esatto.house8 9

Parts and Accessories

Your Air Conditioner

A. Front panel

B. Air lter

C. Frame

D. Cabinet

E. Air inlet grille (outdoor side)

F. Air outlet grille

G. Electronic control keypad

H. Power supply cord

I. Remote controller

A. B. C. D.

CONTROLS

NOTE: The outline of the operation panel is based

on typical model, the function is the same with your

air conditioner while some dierence may exist in

appearance.

NOTE: Some models may not include MED fan speed

feature, and (or) AUTO mode feature and (or) Swing

feature.

VENT CONTROL

The vent control is located above the control knobs.

The operation method is dierent on dierent models

(see the following gures).

For maximum cooling eciency, CLOSE the vent. It

will allow internal air circulation. OPEN the vent to

discharge stale air.

To open the vent, pull the lever toward you.

To close it, push it in.

To open the vent, set the lever to the right position

To close it, set the lever to the left position.

POWER

Press the POWER keypad to turn the unit on/o.

MODE

Press the “MODE” keypad to select the appropriate

operating mode. The mode selection will alternate

between AUTO (cooling only models without),

HEAT (cooling only models without), COOL, FAN and

DRY. The indicator light beside the “MODE” option will

illuminate, identifying the mode selected.

Note: Press the “MODE” keypad to select the FAN

mode, you can press “FAN” keypad to select your

desired fan speed but you cannot adjust temperature.

TEMPERATURE SETTINGS UP

Press the ▲keypad to increase the set (operating)

temperature of the unit. Each time the keypad

is pressed the temperature increases as follows: 1ºC

(Celsius Scale) Maximum Setting 31ºC

TEMPERATURE SETTINGS DOWN

Press the keypad to decrease the set (operating)

temperature of the unit. Each time the keypad

is pressed the temperature decreases as follows: 1ºC

(Celsius Scale) Minimum Setting 16ºC

FAN

Press this keypad to activate the appropriate fan

speed setting. Each depression of the keypad will

alternate through LOW, MED(on some models), HIGH

fan speed options. The indicator light beside the FAN

speed option will illuminate, identifying the fan speed

selected.

SWING (on some models)

Press the “SWING” keypad to activate the automatic

air swing feature. The indicator light adjacent to the

“SWING” keypad will illuminate, identifying to the

selected mode is operational. The vertical louvers will

oscillate back and forth (side to side) automatically

sweeping air alternately for comfortable cooling/

heating. To stop the air swing feature, press the

“SWING” keypad again, the indicator light adjacent to

the keypad will go o.

Fig. A

E. Earth wire, yellow/green

N. Neutral wire, blue

L. Live wire, brown

Seal

(Used on drain joint)

1 pc

Power Cord

Accessories

• Power cord conductors are distinguished according to colour as follows (see Fig. A)

• For your safety and protection, this unit is earthed through the power cord (see Fig. B)

Please contact the manufacturer or its service agent or a similar qualied person if you want to replace it.

• Be sure that the unit being correctly grounded. The wall outlet (Air-break switch) should be provided with

reliable earth wire.

• The unit should be provided with an individual circuit and the circuit breaker/fuse rating should be the same as

that of the power cord and wall outlet.

Note: All manual illustrations are for explanation purpose only. Your air conditioner may be slightly dierent.

Fig. B

Wall Outlet Air-break switch

Drain Joint

1 pc

Drain Tray

1 pc

Rubber plug

1 pc

Screw

(Used to fasten the front panel)

2 pcs

Operation Instructions

User Manual esatto.house10 11

Operation Instructions (Continued)

TIMER

• When the unit is on, press the Timer button will

initiate the Auto stop program, the TIMER OFF

indicator light illuminates. Press the UP or down

button to select the desired time. Press the TIMER

button again within 10 seconds, the Auto start

program is initiated. And the TIMER ON indicator

light illuminates. Press the up or down button to

select the desired Auto start time.

• When the unit is o, press the Timer button to

initiate the Auto start program,press it again within

10 seconds will initiate the Auto stop program.

• Press or hold the UP or DOWN button to change the

Auto time by 0.5 hour increments, up to 10 hours,

then at 1 hour increments up to 24 hours. The control

will count down the time remaining until start.

• The system will automatically revert back to display

the previous temperature setting if there is no

operation in a 10 seconds period.

• Turning the unit ON or OFF at any time or adjusting

the timer setting to 0.0 will cancel the Auto Start/

Stop timer program.

DRY

This mode is used to decrease the humidity in the room.

Under this mode, you cannot select a fan speed. The

fan motor operates at LOW speed. Keep windows and

doors closed for the best dehumidifying eect.

COOL

The temperature setting are adjustable between 17ºC

to 30OC. You can select your desired fan speed.

HEAT

The temperature settings are adjustable between 17ºC

to 30ºC in heating mode. You can select your desired

fan speed.

AUTO

The fan motor remains on MED speed in AUTO mode.

The unit will select the appropriate operating mode

from FAN, COOL or HEAT(For reverse cycle models

only) based upon the temperature dierence between

the actual and desired room temperature.Some models

wihtout MED speed,the fan motor operates on HIGH

speed in AUTO mode.

SLEEP

Press and hold the “SWING” keypad for 2 seconds

or use the remote control to activate the “SLEEP”

feature to deactivate the “SLEEP” feature. When the

sleep feature is activated, the indicator light beside

the “SLEEP” will illuminute. In the Cooling mode, the

cooling temperature set point will increase 1ºC per hour

after the “SLEEP” mode is selected. Two hours later, the

set point will continue at this temperature and the fan

motor will remain on LOW speed. In the Heating mode,

the heating temperature set point will decrease 1ºC

per hour after the “SLEEP” mode is selected. Two hours

later, the set point will continue at this temperature

and the fan motor will remain on LOW speed. Using the

“SLEEP” mode will reduce noise creating a comfortable

sleeping environment.

LED DISPLAY

Shows the temperature setting or Auto-timer setting,

after 10 seconds, shows the room temperature (on some

models) or set temperature (on some models).

Shows Error codes:

Er Indicates a malfunction of the indoor room

temperature sensor

En Indicates a malfunction of the evaporator

temperature sensor

Eo Indicates a malfunction of the outdoor condenser

temperature sensor

Note: When one of the above malfunctions occurs, turn

o the unit and check for any obstructions.

Restart the unit, if the malfunction is still present,

turn o the unit and unplug the power cord.

Contact the manufacturer, its service agents or a

similar qualied person for service.

Ed Indicates frosting protection (Turn o the unit and

restart it to return to normal operation).

EI Indicates the requirement of a lter check after

720 hours of fan operation. Turn o the unit,

disconnect/unplug from the power supply. Clean

the lter, then restore the power, the unit will

return to normal operation. This is a reminder to

clean the Air Filter for more ecient operation.

In the event of a power failure, the “EI” program

is automatically re-set. Therefore we suggest you

remove and clean the lter before re-starting the

unit after any power failure (on some models).

VERTICAL AIR FLOW ADJUSTMENT MANUALLY

Airow in vertical direction can be changed by adjusting horizontal louver manually when the unit

is running.

NOTE: Adjusting angle of horizontal louver depends on models. To avoid generating condensing

water on the surface of horizontal louver, horizontal louver should not be at the maximum upwards

or downwards angle position for a long time

in cooling or drying mode.

AIR FILTER

The air lter behind the inlet grille should be checked and cleaned at least once every 2 weeks

(or as necessary) to maintain optimal performance of the

air conditioner.

Removing the ir lter

1. Turn o the unit, disconnect /unplug from the power supply.

2. Hold the slot under the front panel, then uplift it outwards and remove the front panel.

3. Pinch the handle under the air lter and make the air lter arched, remove it from the slot

from underside to upside.

4. Clean the lter with warm, soapy water. The water should be below 40ºC to prevent

distortion of the lter.

5. Rinse o and gently shake o excess water from the lter. Allow the lter to dry before

replacing it. To prevent distortion of the lter, do not dry in direct sunlight.

Cbinet Clening

• Be sure to unplug the air conditioner to prevent shock or re hazard. The cabinet and front may be dusted

with an oil-free cloth or washed with a cloth dampened in a solution of warm water and mild liquid

dishwashing detergent. Rinse thoroughly and wipe dry.

• Never use harsh cleaners, wax or polish on the cabinet front.

• Be sure to wring excess water from the cloth before wiping around the controls.

• Excess water in or around the controls may cause damage to the air conditioner.

• Plug in air conditioner.

NOTE: Never use water over 50ºC, alcohol, gasoline, acid, solvent or brush to clean the front panel as this will

damage the surface of the part.

WINTER STORAGE

If you plan to store the air conditioner during the winter, remove it carefully from the window according to the

installation instructions. Cover it with plastic or return it to the original carton.

WARNING: Never operate the air conditioner without the air lter as dust/dirt particles can contribute to

equipment failure.

User Manual esatto.house12 13

DRAINAGE

Please follow these instructions to treat condensed water:

1. Bottom drainage. Connect drain hose to the bottom drain tray.

It will slightly aect cooling performance, but will

reduce the noise caused by spraying the condensed water.

Note: Only optional for models with bottom drain hole.

For pump heating, the bottom drainage must be used.

2. Back drainage. Connect drain hose to the back drainage hole.

It will slightly aect cooling performance, but will reduce the

noise caused by spraying the condensed water.

3. Non-drainage. Block the drain hole(s) by rubber plug(s).

The condensed water will be sprayed to condenser, and will

improve the cooling performance.

Installation procedures of bottom drainage:

• Remove the rubber plug from the bottom of cabinet (if installed).

• Take out the drain tray and screws from accessary.

• Fix the drain tray onto the bottom of cabinet by screws.

• Connect an extension drain hose (locally purchased) to the outlet of drain tray.

Instlltion procedures of bck dringe

• Fit the seal (provided as accessory) onto the drain joint.

• Insert the drain joint to the back drainage hole, and rotate it by 90°to be well tted.

• Connect an extension drain hose (locally purchased) to the drain joint.

• Make sure block the bottom drain hole by rubble plug.

Note: Drain hose is locally purchased according to installation

length request.

Note: If you choose non-drainage when cooling, both the bottom

and the back drain holes of the unit should be inserted with

rubber plugs. When you choose non-drainage the air conditioner

will be perfect cooling eciency, but big noise may be caused

by spraying the condensed water. Does not recommend to use.

Note: The rated cooling performance is tested under non-

drainage status.

Note: Make sure that water will not leak from the surrounding area when rubber

plug and joint were used. Please seal it in case leakage is found.

Operation Instructions (Continued) Installation Instructions

Bottom drain hole

Rubber plug

Drain outlet

Dust pan Rubber plug

Screw

Back drain hole

Bottom drain hole

Drain joint Rubber plug

NOTE:

Before installing, remove all packaging from inside the carton, along with any inserts placed into the side louvers.

Select the best loction

1. To avoid vibration and noise, make sure the unit is installed securely and rmly.

2. Install the unit where the sunlight does not shine directly on the unit. If the unit receives direct sunlight, build an

awning to shade the cabinet.

3. There should be no obstacle, such as a fence or wall, within 50cm from the back of the cabinet because it will

prevent heat radiation of the condenser. Restriction of outside air will greatly reduce the cooling and heating

eciency of the air conditioner.

4. Install the unit a little obliquely downward to outside not to leak the condensed water into the room (about

3~4O with level).

5. Install the unit with its bottom portion 75~150cm above the oor level.

6. The power cord must be connected to an independent circuit. The yellow/green wire must be grounded.

WARNING: All side louvers of the cabinet must remain exposed to the outside of the structure.

INSTALLATION OF THE HOUSING

1. Remove the air conditioner from it’s packaging,

remove xing screws and slide the air conditioner out

of it’s housing (Refer to Installation Steps).

2. Prepare the hole in the wall so that the bottom of

the housing is well supported, the top has minimum

clearance and the air inlet louvers have clearance

as shown below in options A and B. Holes from the

outside through to the cavity should be sealed. The

housing should slope down towards the rear by about

5mm to allow water formed during operation to drain.

3. Install the housing into the wall and secure. Ensure

the foam seals are not damaged. Flash, seal or

ll gaps around the inside and outside to provide

satisfactory appearance and protection against the

weather, insects and rodents.

User Manual esatto.house14 15

Installation Instructions (Continued)

INSTALLATION OF THE UNIT INTO THE HOUSING

1. Slide the unit into the housing until it is rmly

against the rear of the housing. Care is required

to ensure the foam sealing strips on the housing

remain in position.

2. Connect the air conditioner to the power and

position excess cord length beneath the air

conditioner base.

3. Engage the chassis xing brackets into the bottom

housing rail and secure to the base with the screw

provided.

4. Remove the front panel from it’s carton and

plastic bag and t as per the Installation

lnstruction.

5. Switch unit on. Check for operation of the unit

and check for vibration in the installation.

6. Fit the drain pan to the housing and run a drain

line to a suitable location if required.

INSTALLATION OF THE UNIT INTO THE WALL

INSTALLATION STEPS

Step 1. Remove the front pnel nd the ir lter

1. Hold the slot under the front panel, then uplift it outwards, and remove the front

panel (See Fig. 1).

2. Pinch the handle under the air lter and make the air lter arched, remove it

from the slot from underside to upside (See Fig. 2).

Fig. 1 Fig. 2

Fig. 3D

Fig. 3C

Fig. 3BFig. 3A

Fig. 4

Step 2. Remove the frme

1. To meet dierent requirement of dierent type of air conditioner, there are four

kinds of removing the frame.

• Remove the two screws on the left and right chassis xing brackets, then

remove the two chassis xing brackets as shown in Fig. 3A.

• Remove one screw on the chassis xing bracket, then remove the chassis

xing bracket. Remove the two screws located on the back of the cabinet

as shown in Fig. 3B.

• Remove one screw on the chassis xing bracket, then remove the chassis

xing bracket as shown in Fig. 3C.

• Remove the four screws located on both sides and the back of the cabinet

as shown in Fig. 3D.

2. Grasp the left corner of the frame’s underside, release the coupler plugs, then

loosen the frame (See Fig. 4).

User Manual esatto.house16 17

Installation Instructions (Continued) This page

is intentionally

left blank

Step 4. Instll the frme.

1. Install the frame and connect the coupler plugs, making sure not

to interfere with the temperature sensor cable (See Fig. 8).

2. Fix the screws on the frame (See Fig. 3A, 3B, 3C, 3D).

Step 5. Instll the ir lter nd front pnel.

1. Install the air lter into the frame’s slot from upside to underside

(See Fig. 2).

2. Hang the front panel on the frame’s buckle, then press the front

panel into the frame’s slot until you hear a click (See Fig 9).

Fig. 8

Fig. 9

Fig. 5 Fig. 6 Fig. 7

Step 3. Instlltion

1. Grasp the handle on the chassis and carefully slide the air conditioner out of the cabinet (See Fig. 5).

2. Remove shipping pad from around compressor before operation and make sure the discharge points to the

drain pan are aligned before the chassis is pushed into the cabinet (See Fig. 6).

3. Push the unit chassis into the cabinet (See Fig. 7).

User Manual esatto.house18 19

Troubleshooting

NOTE: Please review the chart below before calling for service.

NORMAL OPERATION

• You may hear a pinging noise caused by water being picked up and thrown against the condenser on rainy days

or when the humidity is high. This design feature helps remove moisture and improve eciency.

• You may hear the thermostat click when the compressor cycles on and o.

• Water will collect in the base pan during high humidity or on rainy days .The water may overow and drip from

the outdoor side of the unit.

• The fan may continue to operate when the compressor has cycled o.

ABNORMAL OPERATION

Fult Possible Cuse Solution

Air conditioner

does not start

• The air conditioner is

unplugged

• Make sure the air conditioner plug is pushed completely into

the outlet and switched on.

• The fuse is blown/circuit

breaker is tripped

• Check the house fuse/circuit breaker box and replace the fuse

or reset the breaker.

• Power failure. • If power failure occurs, switch o and disconnect/unplug

the power cord. When power is restored, reconnect (plug

in) the power cord, switch on the power and wait 3 minutes

to restart the air conditioner to prevent tripping of the

compressor overload.

Air conditioner does not cool

as it should

• Airow is restricted • Make sure there are no curtains, blinds, or furniture blocking

the front of the air conditioner.

• The air lter is dirty. • Clean the lter at least every 2 weeks.

See the operating instructions section.

• The room may have been hot. • When the air conditioner is rst turned on you need to allow

time for the room to cool down.

• Cold air is escaping • Check for open furnace oor registers and cold air returns.

• Set the air conditioner’s vent to the closed position.

• Cooling coils have iced up • See Air Conditioner Freezing Up below.

Air conditioner

freezing up

• Ice blocks the air ow and

stops the air conditioner from

cooling the room.

• Set the fan at MED or HIGH until the ice melts.

Specications

Below outlines the technical specications for your Esatto Air Conditioner.

Dimensions (W  D  H mm) 600  560  380mm

Net Weight 36.2kg

Gross Weight 39.2kg

Power Supply 220-240V, ~50Hz, 1Ph

Minimum norminal cross-sectional area of conductors:

Rated current of appliance (A) Nominal cross-sectional area (mm2)

3 and  6 0.75

6 and ≤ 10 1

10 and ≤ 16 1.5

16 and ≤ 25 2.5

Suggest Minimum Wire Size (AWG: American Wire Gage):

Appliance Amps AWG Wire Size

10 18

13 16

18 14

25 12

30 10

Inhaltsverzeichnis

Andere Esatto Klimaanlage Handbücher

Esatto

Esatto ESAC35RC Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Spheros

Spheros CC 355 Bedienungsanleitung

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Bedienungsanleitung

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Samsung

Samsung AR KV Series Leitfaden

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

Hitachi

Hitachi RAS-E24CAK Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Hisense

Hisense 7K Technisches Handbuch

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung