REV0709
15270 Flight Path Drive Brooksville Fl, 34604 Phone 800-352-9852 Fax 352-754-4508
may result in property damage or personal injury.
WARNING!
The forklift & tractor jack is designed for raising forklift or other farm equipment only.
Use only on hard level surface. Follow safety instructions included with product for safe
use.
Safety Warnings
1. This is a lifting device only. Do not use as a dolly while vehicle is on the jack.
2. Do not overload which may cause damage to or failure of the jack.
3. Lifting only on the points suggested or specified by the vehicle manufacturer.
4. Be sure to use jack on hard, level surface ground.
5. Do not work under vehicle while jack is the only support device.
6. Any parts missing or damaged or found to be badly worn, it should be removed from
service.
7. Failure to comply with these warning may result in loss of load, damage to jack, and/or
failure resulting in personal injury or property damage.
Specifications:
Lifting Weight: 8800 lb ( 4000 kg )
Lifting Range: 13-3/4” ( 350 mm )
Min Height: 2-9/16” ( 65 mm )
Max Height: 16-3/8” ( 415 mm )
Operation:
Raising the Jack
1. Turn handle knob clockwise, until resistance is felt. Do not over tighten.
2. Place jack directly under vehicles to be lifted. Check the position under slight load to
confirm jack or load will not slip, and is properly centered under load.
3. Raise jack by pumping handle until desired height is reached. After lifting, secure load
by jack stand or other appropriate means. Do not use jack as the only means of
support.
Lowering the Jack
1. Slowly turn handle knob counter-clockwise. Speed of descent is controlled by how
much the release valve is opened.Always lower slowly and with caution
2. Always store jack in the fully lowered position.
