ESD electronic EPPC-405-HR Bedienungsanleitung
EPPC-405-HR Manual Rev. 1.1
EPPC-405-HR
PowerPC-Module
for Installation on Mountin
g
Rail
Manual
to product I.2006.xx
EPPC-405-HR Manual Rev. 1.1
Document file: I:\texte\Doku\MANUALS\SONSTIGE\EPPC-405-HR\Englisch\EPPC-405-HR_11H.en9
Date of print: 14.01.2005
PCB-version: 1.0
Chan
g
es in the chapters
The changes in the document listed below affect changes in the hardware as well as changes in the
description of facts only.
Chapter Changes versus previous version
- First version.
--
Technical details are subject to change without further notice.
EPPC-405-HR Manual Rev. 1.1
N O T E
The information in this document has been carefully checked and is believed to be entirely reliable. esd
makes no warranty of any kind with regard to the material in this document, and assumes no
responsibility for any errors that may appear in this document. esd reserves the right to make changes
without notice to this, or any of its products, to improve reliability, performance or design.
esd assumes no responsibility for the use of any circuitry other than circuitry which is part of a product
of esd gmbh.
esd does not convey to the purchaser of the product described herein any license under the patent rights
of esd gmbh nor the rights of others.
esd electronic s
y
stem desi
g
n
g
mbh
Vahrenwalder Str. 207
30165 Hannover
Germany
Phone: +49-511-372 98-0
Fax: +49-511-372 98-68
E-mail: [email protected]
Internet: www.esd-electronics.com
USA / Canada:
esd electronics Inc.
12 Elm Street
Hatfield, MA 01038-0048
USA
Phone: +1-800-732-8006
Fax: +1-800-732-8093
E-mail: [email protected]
Internet: www.esd-electronics.us
EPPC-405-HR Manual Rev. 1.1 1
Contents
1. Overview .................................................................... 3
1.1 General .................................................................. 3
1.2 Summary of Technical Data .................................................. 4
1.2.1 Ambience Conditions ................................................. 4
1.2.2 Dimensions and Mounting ............................................. 4
1.2.3 Supply Voltage ...................................................... 4
1.2.4 Connectors ......................................................... 5
1.2.5 Microprocessor and Memory ........................................... 5
1.2.6 LEDs .............................................................. 5
1.2.7 CAN-Interface ....................................................... 6
1.2.8 Serial Interface ...................................................... 6
1.2.9 Ethernet Interface .................................................... 7
1.2.10 Software .......................................................... 7
1.3 Order Information .......................................................... 8
2. Description of Assemblies ...................................................... 9
2.1 LED-Displays ............................................................ 9
2.1.1 LED Status ......................................................... 9
2.2 PowerPC Microcontroller PPC405EP .......................................... 10
2.2.1 General ........................................................... 10
2.2.2 Address Assignment ................................................. 10
2.2.3 Interrupt Assignment ................................................. 10
2.2.4 PLD-internal Registers ............................................... 11
2.2.4.1 Addressing .................................................. 11
2.2.4.2 Description of Registers ....................................... 12
2.3 Serial Interface ............................................................ 13
2.3.1 Default Setting ..................................................... 13
2.3.2 Configuration ...................................................... 13
2.4 CAN-Assembly ........................................................... 13
3. Connector Assi
g
nment ....................................................... 14
3.1 Connecting Diagram ....................................................... 14
3.1.1 Mounting-Rail Contact “FE” .......................................... 14
3.2 Serial Interface (X710B) .................................................... 15
3.2.1 Assignment of RJ12-Socket ........................................... 15
3.2.2 Example: Connection via Adaptor Lead RJ12-DSUB9 ...................... 15
3.3 Ethernet (X800A) ......................................................... 16
3.4 CAN-Bus (X1100, 5-pin Mini Combicon Socket) ................................ 16
3.5 Power Supply Voltage (X1300) ............................................... 17
4. Correctl
y
Wirin
g
Electricall
y
Isolated CAN Networks ............................. 19
EPPC-405-HR Manual Rev. 1.12
This page has intentionally been left blank.
Overview
EPPC-405-HR Manual Rev. 1.1 3
10/100BaseT
Interface
Serial
Interface
RS-232
CPLD
Control Logic
CAN Controller
SJA1000
Power Supply
X710 (RJ12)
Console,
Debug
CAN
Transceiver
Uout1= 1,8V
8 MB
NOR-Flash
SDRAM
32 MB
Uin= 24V Uout2= 3,3V
X1300 (MSTBO)
Power
X1100 (MC)
CAN
X800 (RJ45)
Ethernet
Uout3= 5,0V LEDs
PowerPC
IBM
PPC405
133 MHz
1. Overview
1.1 General
Fi
g
. 1.1.1: Block-circuit diagram
The EPPC-405-HR is a stand-alone PowerPCTM- computer in a narrow plastic case for the installation
on mounting rail. The PowerPC-unit IBM PPC405EP has a clock speed of 133 MHz. The computer
has got a 32 Mbyte SDRAM and a flash memory of up to 8 MBYTE. Light-emitting diodes display the
device status.
The EPPC-405-HR has got an Ethernet interface for networks with 10 Mbit/s and 100 Mbit/s. It is
connected via an RJ45-socket in the front panel.
In addition the EPPC-405-HR has got a CAN-interface. It is controlled via an SJA1000 CAN-controller
and enables data-transfer rates of up to 1 MBIT/s. The interface is electrically isolated from other units
and constructed in accordance with ISO 11898.
The serial RS232-interface for terminal and debugging is accessible via an RJ12-socket in the front
panel.
The standard operating system is Linux. VxWorks BSP is also available. Please contact our support
team about the use of other operating systems.
By means of the runtime and programming system CoDeSys the EPPC-405-HR can be operated like
a PLC. CoDeSys is described in a separate manual.
Overview
EPPC-405-HR Manual Rev. 1.14
1.2 Summar
y
of Technical Data
1.2.1 Ambience Conditions
Ambient temperature in the
case 0 ... +70 C
Storage temperature -40 C ... +100 C
Humidity max. 90 %, non-condensing
1.2.2 Dimensions and Mountin
g
Case design Phoenix Contact type ME MAX 22.5 G U-U1 KMGY
Protection class IP40
Dimensions 23x100x120 mm (WxHxD) including mounting rail fitting
Mounting suitable for mounting rail NS35/7.5 according to DIN EN 50022
Weight ca. 115 g
1.2.3 Suppl
y
Volta
g
e
Nominal voltage Uin = +24 V/DC
Permissible input voltage
range Uin = +15 V/DC ... +38 V/DC
Input voltage - protection against voltage drops (Ub= 12 V for 10 s)
- reverse battery protection
Power consumption Pin < 3.0 W (at Uin = 24 V)
Overview
EPPC-405-HR Manual Rev. 1.1 5
1.2.4 Connectors
Connectors
(device connectors)
X710B
(6-pin RJ12-socket)
- serial interface (panel)
X800A
(8-pin RJ45-socket)
with integrated LEDs)
- 10/100 Base-T Ethernet
X1100
(5-pin Mini-Combicon-socket
MCV1.5/5-3,81)
- CAN
X1300
(4-pin Mini-Combicon-socket
MSTBO 2.5/ 4-G1R KMGY)
- power supply
1.2.5 Microprocessor and Memor
y
CPU PPC405EP / 133 MHz
Flash-EPROM 8 Mbyte (NOR-Flash)
SDRAM 32 Mbyte (standard)
Hardware watchdog CPU-internal
1.2.6 LEDs
Number of externally
visible LEDs 6
Display function
LED “L” (green) Ethernet Link
LED “T” (green) Ethernet Traffic
LED “R” (green) RUN
(power supply is ‘on’)
LED “C” (green) CAN-TRAFFIC
(alternatively programmable by user)
LED “S” (green) STATUS
(alternatively programmable by user)
LED “E” (red) ERROR-STATUS
(alternatively programmable by user)
Overview
EPPC-405-HR Manual Rev. 1.16
1.2.7 CAN-Interface
CAN-controller SJA1000
CAN-protocol CAN 2.0B
Physical interface differential, connection in accordance with ISO 11898
Transmission rate value range: 10 Kbit/s ... 1 Mbit/s
Bus termination has to be connected externally, if required
Electrical isolation yes
Software esd CAN-API (NTCAN-API)
Connector X1100 (5-pin Combicon-socket, grid 3.81 mm)
1.2.8 Serial Interface
Use operating system panel
Controller integrated in CPU
Bit rate value range: 9600 baud ... 115200 baud
default setting: 115200 baud, 8 bit, no parity 1 stop bit
Physical interface RS232 with RxD, TxD, RTS, CTS
Connector X710B (6-pin RJ12-socket)
Overview
EPPC-405-HR Manual Rev. 1.1 7
1.2.9 Ethernet Interface
Bit rate 10 Mbit/s, 100 Mbit/s (automatic detection)
Controller CPU-internal
Physical interface Twisted Pair (IEEE802.3) 10/100BaseT on RJ45-socket
Electrical isolation transformer
Software operating system support
Connector X800A (8-pin RJ45-socket)
1.2.10 Software
Operating system Linux, Kernel 2.4
Driver full support of all interfaces,
drivers and API-functions optimised for this system
Inhaltsverzeichnis
Andere ESD electronic Computerhardware Handbücher
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
