ESD CAN-PCIe/200 Bedienungsanleitung
CAN-PCIe/200 Hardware Manual • Doc. No.: C.2042.21 / Rev. 1.2 Seite 1 von 22
esd electronic system design gmbh
Vahrenwalder Str. 207 • 30165 Hannover • Germany
www.esd-electronics.com • Fax: 0511/37 29 8-68
Phone: 0511/37 29 80 • International: +49-5 11-37 29 80
CAN-PCIe/200
Passive CAN-Interface Board
for PCI Express
Hardware Manual
to Product C.2042.xx
Hardware Manual • Doc. No.: C.2042.21 / Rev. 1.2 CAN-PCIe/200
Seite 2 von 22
N O T E
The information in this document has been carefully checked and is believed to be entirely reliable. esd
makes no warranty of any kind with regard to the material in this document, and assumes no
responsibility for any errors that may appear in this document. esd reserves the right to make changes
without notice to this, or any of its products, to improve reliability, performance or design.
esd assumes no responsibility for the use of any circuitry other than circuitry which is part of a product
of esd gmbh.
esd does not convey to the purchaser of the product described herein any license under the patent rights
of esd gmbh nor the rights of others.
esd electronic system design gmbh
Vahrenwalder Str. 207
30165 Hannover
Germany
Phone: +49-511-372 98-0
Fax: +49-511-372 98-68
E-mail: [email protected]
Internet: www.esd-electronics.com
USA / Canada:
esd electronics Inc.
525 Bernardston Road
Suite 1
Greenfield, MA 01301
USA
Phone: +1-800-732-8006
Fax: +1-800-732-8093
E-mail: [email protected]
Internet: www.esd-electronics.us
CAN-PCIe/200 Hardware Manual • Doc. No.: C.2042.21 / Rev. 1.2 Seite 3 von 22
Document-File: I:\texte\Doku\MANUALS\CAN\PCI\PCIe200\english\PCIe-200_12H.ma9
Date of print: 2007-06-14
PCB version: from PEX266 Rev. 1.0
Changes in the chapters
The changes in the user’s manual listed below affect changes in the firmware as well as changes in the
description of the facts only.
Chapter Changes versus previous version
- Product name changed from CAN-PCIe/2000 to CAN-PCIe/200.
- Footer and page numbers changed.
Technical details are subject to change without notice.
Hardware Manual • Doc. No.: C.2042.21 / Rev. 1.2 CAN-PCIe/200
Seite 4 von 22
This page is intentionally left blank.
CAN-PCIe/200 Hardware Manual • Doc. No.: C.2042.21 / Rev. 1.2 Seite 5 von 22
Table of Contents
1. Overview .................................................................... 7
1.1 Description of the Module .................................................... 7
1.2 PCB View with Position of the Connectors ...................................... 8
2. Hardware-Installation ......................................................... 9
3. Technical Data .............................................................. 11
3.1 General Technical Data ..................................................... 11
3.2 PCI Express Interface ...................................................... 11
3.3 CAN Interface ............................................................ 12
3.4 Software Support .......................................................... 12
3.5 Order Information ......................................................... 13
4. Front Panel View with LED Display ............................................ 14
5. Connector Assignment of the CAN Bus Interface ................................. 15
5.1 CAN Interface on DSUB9 Connector .......................................... 15
6. Correctly Wiring Electrically Isolated CAN Networks ............................. 16
7. CAN-Bus Troubleshooting Guide .............................................. 20
7.1 Termination ............................................................. 20
7.2 CAN_H/CAN_L Voltage ................................................... 21
7.3 Ground ................................................................. 21
7.4 CAN Transceiver Resistance Test ............................................ 22
Hardware Manual • Doc. No.: C.2042.21 / Rev. 1.2 CAN-PCIe/200
Seite 6 von 22
This page is intentionally left blank.
Overview
CAN-PCIe/200 Hardware Manual • Doc. No.: C.2042.21 / Rev. 1.2 Seite 7 von 22
+12 V=
+5 V=
+12 V=
+5 V=
C
A
N
B
U
S
CAN
CAN
LEDs
PLD
Physical
CAN
Layer
C
A
N
B
U
S
Electrical Isolation
DC/DC
Converter
DSUB9
CiA pinning
CAN Controller
SJA1000
PCI Express
Endpoint
PEX8311
Electrical Isolation
PCI Express Card Connector
CAN Controller
SJA1000
Physical
CAN
Layer
DSUB9
CiA pinning
2nd CAN Interface
only
CAN-PCIe/200-2
DC/DC
Converter
1. Overview
1.1 Description of the Module
Fig. 1.1: Block circuit diagram of CAN-PCIe/200
The CAN-PCIe/200 is a passive CAN interface board for PCI Express with one, or optionally two CAN
interfaces.
The ISO 11898-2 CAN interface allows a maximum data transfer rate of 1 Mbit/s. Among many other
features of the CAN interfaces, the baud rate can be set by software.
The maximum effective CAN bit rate value may be limited by the performance of the host CPU,
because this is a passive CAN module without a microcontroller on board.
The CAN interface is electrically isolated from the other potentials by optocouplers and DC/DC-
converters.
The CAN-PCIe/200 is equipped with four LEDs in the front panel.
Overview
Hardware Manual • Doc. No.: C.2042.21 / Rev. 1.2 CAN-PCIe/200
Seite 8 von 22
1.2 PCB View with Position of the Connectors
Fig. 1.2: PCB view of CAN-PCIe/200-2 with 2 CAN interfaces
Installation
CAN-PCIe/200 Hardware Manual • Doc. No.: C.2042.21 / Rev. 1.2 Seite 9 von 22
2. Hardware-Installation
Attention!
Electrostatic discharge may cause damage to electronic devices. In order to avoid this, please follow
the instructions below before you touch the CAN module to discharge your personal static
electricity:
@Switch off the power supply of your PC but leave the connector plug in the socket.
@Then touch the metal case of the PC to discharge the static electricity.
@Furthermore you must avoid contact between your clothes and the CAN module.
Procedure:
1. Switch off the PC and all connected peripheral devices (monitor, printer, etc.). Switch off the
CAN devices of the net to which the CAN module is to be connected.
2. Discharge yourself as described above.
3. Disconnect the power supply of the PC from the mains.
4. Remove the PC cover.
Unfasten the mounting screws at the back of the PC and remove the cover.
5. Select an open PCIe slot and remove the slot cover at the back of the PC. Unfasten the screw
which fixes the slot cover and retain it for fixing the module afterwards.
The CAN module can be inserted into every PCI slot. Be careful not to insert the board into an
ISA slot, because this can damage the PC and the board!
6. Insert the CAN module into the selected PCIe slot.
Carefully push the board down until it snaps into place.
7. Attach the board.
Use the screw you removed from the slot cover in step 5.
8. Replace the PC cover.
Secure the cover with the screws you removed in step 4.
@@
Installation
Hardware Manual • Doc. No.: C.2042.21 / Rev. 1.2 CAN-PCIe/200
Seite 10 von 22
9. Connect the CAN wire.
Please note that the CAN bus has to be terminated at both ends!
esd offers special T- connectors and terminator connectors. Additionally the CAN_GND signal
has to be connected to earth at exactly one point. For easier wiring the termination connectors are
equipped with an earth connector (4.8 mm fast-on, male).
A CAN participant without an electrically isolated interface acts as an earth connection.
The first CAN interface (CAN net 0) has to be connected via the lower DSUB connector (X400)
and the second CAN interface (net 1) has to be connected via the upper DSUB connector (X410).
10. Reconnect the power supply of the PC.
11. Switch on the PC, the peripheral devices and the other CAN participants in any order.
12. End of hardware installation.
Continue with the software installation as described in the manual “CAN-API, Part 2: Installation
Guide".
Andere Handbücher für CAN-PCIe/200
1
Inhaltsverzeichnis
Andere ESD Computerhardware Handbücher
ESD
ESD CAN-PCI/402 Bedienungsanleitung
ESD
ESD CAN-M.2/402-2-FD Bedienungsanleitung
ESD
ESD CPCI-405 Bedienungsanleitung
ESD
ESD CAN-PCIeMini/402-2 Bedienungsanleitung
ESD
ESD XMC-CPU/T10 Bedienungsanleitung
ESD
ESD VME-DIO32-C Bedienungsanleitung
ESD
ESD CPCI-ASIO4 Bedienungsanleitung
ESD
ESD PMC-CPU/440 Bedienungsanleitung
ESD
ESD VME-DIO32-L Bedienungsanleitung
ESD
ESD EPPC-405-UC Bedienungsanleitung
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
