ESD VME - ASIO16 Bedienungsanleitung

VMEVME -- ASIO16ASIO16

1616 serialserial InterfacesInterfaces

VME-ASIO16 Rev. 1.7

NOTE

The information in this document has been carefully checked and is

believed to be entirely reliable. esd makes no warranty of any kind

with regard to the material in this document, and assumes no respon-

sibility for any errors that may appear in this document. esd reser-

ves the right to make changes without notice to this, or any of its

products, to improve reliability, performance or design.

esd assumes no responsibility for the use of any circuitry other

than circuitry which is part of a product of esd gmbh.

esd does not convey to the purchaser of the product described herein

any license under the patent rights of esd gmbh nor the rights of

others.

esd electronic system design gmbh

Vahrenwalder Str. 207

D-30165 Hannover

Germany

Phone: +49-511-37298-0

FAX: +49-511-37298-68

This document shall not be duplicated, nor its contents used

for any purpose, unless express permission has been granted.

VME-ASIO16 Rev. 1.7

Manual file: ...\MANUALS\VME\asio1617.en6 14.11.97

Described ASIO16 1.1

PCB version

Described ASIO4.0

firmware version

Changes in the chapters

The changes in the user’s manual listed below affect changes in the

firmware, as well as changes in the description of the facts only.

Chapter Alternations versus rev. 1.6

1.4.3.1 Correction of P2’s pin assignment in fig. 1.4.2

Further technical data are subject to change without notice.

VME-ASIO16 Rev. 1.7

User’s Manual VME-ASIO16

Content Page

1. Hardware .......................... 5

1.1 Block Diagram .................... 5

1.2 Technical Data .................... 6

1.2.1 Overview ................... 6

1.2.2 Real-time Software .............. 6

1.2.3 Summary of the Technical Data ......... 7

1.2.4 Order Information ............... 9

1.3 Address Selection on the VME-ASIO16 ......... 11

1.4 Configuration Jumpers ................ 13

1.4.1 Default Setting ................ 14

1.4.2 VMEbus Interface Jumpers ........... 15

1.4.2.1 The Address Modifier (AM) and DS1 at BR3 15

1.4.2.2 Base Address Decoding via Jumpers BR1

andBR2 ................ 19

1.4.2.3 Interrupt Levels ............ 20

1.4.3 Jumperfields of the Serial Interfaces ..... 21

1.4.3.1 Feeding of the Power Supply ...... 21

1.4.3.2 Selection between RS-232 and TTY

Interfaces ............... 23

1.4.3.3 Control Signals of the Serial Interfaces 26

1.5 Serial Interfaces .................. 29

1.5.1 Circuitry of the Serial Interfaces ...... 29

1.5.2 The RS-232 Interface ............. 30

1.5.3 The TTY Interface ............... 30

1.6 Interrupt Processing ................. 31

2. RTOS-UH Software Support .................. 33

2.1 Survey Channel Structure ............... 33

2.2 Parameter Channel .................. 34

2.2.1 Structure of the Parameter Channel Ix.PARA

(Px.) ..................... 34

2.2.2 Description of the Parameters in Particular . . 35

VME-ASIO16 Rev. 1.7 1

Content Page

3. Appendix .......................... 39

3.1 Connector Pin Assignments .............. 39

3.1.1 VMEbus P1 ................... 39

3.1.2 I/O Connector P2

(at Internal Supply of the TTY Interface) . . . 40

3.1.3 I/O Connector P2

(at External Supply of the TTY Interface) . . . 41

3.1.4 I/O-Connector P2 (if ASIO RS422 Add On is used) 42

3.2 ASIO16 Adaptor (VME-ASIO-ADAPT) ........... 43

3.2.1 General .................... 43

3.2.2 View of the ASIO16 Adaptor .......... 44

3.2.3 Jumpers of the ASIO16 Adaptor ......... 45

3.2.3.1 Power Supply Selection via BR21 to BR25 45

3.2.3.2 Fixing of the Connector Pin Assignment

via BR1 to BR16 ............ 47

3.2.4 Covering of the 14 pole Connector Plug on the

ASIO16 P2 Adapter ............... 49

3.2.5 Connector Pin Assignment RS-232 via Flat Cable

to DSUB-15 or to DSUB-25 Females ....... 50

3.2.6 Connector Pin Assignment TTY via Flat Cable to

DSUB-9, DSUB-15 or to DSUB-25 Females ..... 51

3.2.7 Connector Pin Assignment RS422 via Flat Cable

to DSUB-15 or to DSUB-25 Females ....... 52

3.3 Add-On ’ASIO-422’.................. 53

3.3.1 General .................... 53

3.3.2 View of the ASIO422-Add-Ons .......... 53

3.3.3 Jumpers of the ASIO422 Add-On ......... 54

3.3.3.1 Selection of the Power Supply via the

Jumpers J1 to J3 ............ 54

3.4 Front Panel ..................... 55

3.5 Circuit Diagrams ................... 57

3.6 Data Sheets ..................... 59

VME-ASIO16 Rev. 1.72

User’s Manual VME-ASIO16

Contents of Figures Page

Fig. 1.1.1: Block Diagram of the VME-ASIO16 .......... 5

Fig. 1.4.1: Position of the Jumpers on the ASIO16 ....... 13

Fig. 1.4.2: Wiring of the External TTY Interfaces Power Supply 22

Fig. 1.4.3: Block Diagram of the Interfaces .......... 23

Fig. 1.5.1: Circuitry of the Serial Interfaces

(Example: Channel 1) ............... 29

Fig. 3.2.1: View of the ASIO16 Adapter with Designation of the

Jumpers ...................... 44

Fig. 3.3.1: Top Overlay Placement of the RS-422 Add-Ons with

Marking of the Jumpers .............. 53

Contents of Tables

Table 1.2.1: General Data of the VME-ASIO16 .......... 8

Table 1.2.2: Order Information ................ 9

Table 1.3.1: Address Model of the VME-ASIO16 ......... 11

Table 1.4.1: Default Jumper Setting .............. 14

Table 1.4.2: AM Configuration of the VME-ASIO16 ........ 15

Table 1.4.3: Recommended Access Modes for Standard Accesses

(A24) ...................... 17

Table 1.4.4: Recommended Access Modes for Standard Accesses

(A16) ...................... 18

Table 1.4.5: Channel Assignment to the Jumpers BR33 to BR40 . . 26

Table 1.4.6: Functions of the DUART68681 Ports ........ 26

Table 2.1.1: Data Station Designation ............ 33

VME-ASIO16 Rev. 1.7 3

VME-ASIO16 Rev. 1.74

Overview

1. Hardware

1.1 Block Diagram

Fig. 1.1.1: Block Diagram of the VME-ASIO16

VME-ASIO16 Rev. 1.7 5

Overview

1.2 Technical Data

1.2.1 Overview

The VME-ASIO16 is an input/output board for asynchronous serial data

transfer via 16 channels. Each channel can be operated as a RS-232

interface or as a 20 mA current loop. The operation mode can be

selected for each channel separately by jumpers. All signal and

supply lines are fed via the P2 connector.

The current loop interfaces are provided with electrical isolation

via optocouplers. For operation as current loop interfaces ±12 V

power can be supplied either externally via P2 or internally via the

VMEbus. The current sources for transmission and reception signals

are located on the board (active current source). At operation as

RS-232C interface the data lines and handshakes are available even

in the base version.

An interrupt logic with priority control generates a common inter-

rupt on the VMEbus for each two channels. The interrupt level is

selectable from 1 to 7 by jumpers. An interrupt is also generated at

a line break of the 20 mA current loop.

Alternatively (Add-on-Board) the board can be equipped with up to 12

channels of RS-422 (optoisolated) and 4 channels of RS-232.

The channel handling is performed by up to 8 DUART 68681, depending

on the equipment of the board.

1.2.2 Real-time Software

Driver packages for the VME-ASIO16 are available for operating

systems such as VxWorks, OS-9 and others.

VME-ASIO16 Rev. 1.76

Inhaltsverzeichnis

Andere ESD Aufnahmegeräte Handbücher

ESD

ESD CPCI-USB-5 Bedienungsanleitung

ESD

ESD CAN-PCI/266 Bedienungsanleitung

ESD

ESD ECS-PMC/FPGA Bedienungsanleitung

ESD

ESD CAN-ISA/331 Bedienungsanleitung

ESD

ESD CPCI-CAN/400-2 Bedienungsanleitung

ESD

ESD CAN-PCI/402 Bedienungsanleitung

ESD

ESD CAN-PCI104/200 Bedienungsanleitung

ESD

ESD C.2076.63 Bedienungsanleitung

ESD

ESD DN-PC104/331 Gebrauchsanweisung

ESD

ESD CAN-PC104/331 Gebrauchsanweisung

ESD

ESD CAN-PCI/405-B4 Bedienungsanleitung

ESD

ESD CAN-USB/Micro Bedienungsanleitung

ESD

ESD CPCI-PN-DEV Bedienungsanleitung

ESD

ESD CAN-PC104/200 Gebrauchsanweisung

ESD

ESD CAN-PCI/405 Bedienungsanleitung

ESD

ESD CPCI-ETH2 Bedienungsanleitung

ESD

ESD PMC-CAN/331-3.3 Gebrauchsanweisung

ESD

ESD ECS-XMC Bedienungsanleitung

ESD

ESD CPCI-CAN/331 Gebrauchsanweisung

ESD

ESD CAN - PCC Bedienungsanleitung

ESD

ESD CAN-USB/3-FD Bedienungsanleitung

ESD

ESD CPCI-CAN/400-4 Bedienungsanleitung

ESD

ESD CAN-CBX-THERMO Bedienungsanleitung

ESD

ESD CAN-CBM-CLOCK Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch