Eshine Single Panel with IR sensor Bedienungsanleitung
USER MANUAL
Single Panel with IR sensor (No Power
Supply)
30cm/11.8
2
Thank you for choosing a product of the brand EShine. Before
starting up the lights read through the instructions and store it for
future reference.
Packaging content:
· 1 x LED bar with IR sensor (this bar will act as a controller for the
chain if you add more LED bars without sensor )
· 1 x Connection cable
· 1 x Connector
· 2 x Wire Clips
· 1 x 3M double-sided sticker
· 2 x Screws
· 2 x Screw caps
Technical specifications
Dimensions (mm):
28.6x9.6x300 (WxHxL)
Material:
Plastic and Aluminum
Input Voltage:
100 –240V AC
Operating voltage:
12V DC
Power:
3W
Dimmable:
Yes, touchless dimming
Color temperature:
Warm (3000K) or Cool (6000K)
Rated life:
> 25,000 hours
Switching cycles:
> 15,000
Nominal luminous flux:
230lm
Angle:
120°
Water and Dust Proofing Rating:
IP20
Protection class:
III
Operating temperature:
-20°C to + 45°C
3
Precautions
· Please check the lamp carefully before installing.
· Ensure the power is off before wiring and installing.
· This LED strips must be operated with 12V DC voltage.
· Please do not open the LED strips.
· Please do not retrofit the lamp within warranty period
· Please use this product for indoor only!
· Warning! The packaging contains small parts. Not for children.
· The LED under cabinet light is equipped with IR sensor a so-
called " Hand wave on/off ". The LED lights turn on/off by waving
your hand under IR sensor, which built in the middle.
Important tip before installing your lighting system
4
1. Use screws or 3M double-sided stickers to fasten lights to
the installation location (see Pic.1).
Pic.1 Installation with screws Pic.1a Installation with 3M
2. You can use connections cables or connectors to install
additional lights (see Pic.2, 3). If you use cables, wire clips
included for comfortable installation.
Pic.2 Connection cables Pic.3 Connectors
5
3. The main plug of the 12V power supply must be connected to
a specially marked side of LED strip with IR sensor.
This strip is labeled with the following note: "Connect power". On
the marked side, please connect the power cord (see Pic.4).
Pic.4: Connection of the power plug to the bar with IR sensor
Note: If you connect the power cord on the wrong side or wrong
led bar, which is not marked, NO IR sensor (“hand wave on/off”)
will be functional, but light can be operated with regular switch or
just plug/unplug adapter.
6
4. After connecting the power cord, to turn on the light wave your
hand under IR sensor. (see Pic.5)
The sensing distance is 6-8 cm from IR sensor.
Pic.5 On/Off function
IMPORTANT: Make sure there are no objects within 4 inches from
the sensor (wall, wood board, any supplies, cabinet lip etc). If you
install LED bar with the IR closer to the lip or wall, it will block the
sensor and LED bar will not operate properly.
7
5. Hold your hand under the sensor for more than 1 sec to adjust
brightness of all lights from 10% to 100% level. When you turn
lights on/off it will remember your last used brightness level.
Pic.6 Dimmable function
8
6. To ensure better lighting, please clean the lamp at regular
intervals.
Before you clean the LED lights ensure that the power is off.
Absolutely avoid when cleaning the lights wearing metallic or
conductive jewelry such as bracelets, necklaces, rings etc.
A soft dry cloth is recommended for cleaning.
Please do not install the LED lights close to heat sources or on
open fires.
7. With the 12W 12V DC power supply included in the kit, you can
use additional LED bars based on the information below:
7" bar - 2W+/-10%
12" bar - 3W+/-10%
20" bar - 5W+/-10%
40" bar - 10W+/-10%
Puck light - 2W+/-10%
The power supply can handle MAX 12W load.
Power supply comes with the 4.9ft cord.
Connector specification: 3.5mm (Outer Diameter) x 1.35mm (Inner
Diameter).
IMPORTANT: Never overload power supply. Before purchase
please make sure you have 12V DC compatible LED bars.
9
8.EShine LED Lighting Kit comes with Limited 3-Years Warranty.
What does this limited warranty cover?
This Limited Warranty covers any defects in material or
workmanship under normal use during the Warranty Period.
What will we do to correct problems?
During the Warranty Period, we will repair or replace, at no
charge, products or parts of a product that proves defective
because of improper material or workmanship, under normal use
and maintenance.
How long does the coverage last?
The Warranty Period for this LED lighting kit is 3 years from the
date of purchase.
What does this limited warranty not cover?
This Limited Warranty does not cover any problem that is caused
by:
● conditions, malfunctions or damage not resulting from defects in
material or workmanship
What do you have to do?
To obtain warranty service, you must first contact us to determine
the problem and the most appropriate solution for you.
EShine®
Web: www.eshinestore.com
Email: [email protected]
10
Gracias por elegir un producto de la marca EShine. Antes de
encender las luces lea las instrucciones y guárdelas para futuras
consultas.
Contenido del paquete:
· 1X luz LED con sensor IR (esta luz actúa como una unidad de
control para el resto de luces en la cadena)
· 1X Cables de Conexión
· 1X Conectores
· 2X Ganchos de Alambre
· 1X 3M Pegatinas adhesivas de doble cara
· 2X Tornillos
· 2X Tapones de rosca
Especificaciones técnicas
Dimensiones (mm):
28.6x9.6x300 (AxAxL)
Material:
Plástico y Aluminio
Voltaje de entrada:
100 - 240V AC
Tensión de uncionamiento:
12V CC
Potencia:
3W
Regulable:
Si, atenuación sin contacto
Temperatura de color:
Cálido (3000K) or Frío (6000K)
Vida útil:
> 25,000 hora
Ciclos de conmutación:
> 15,000
Flujo luminoso nominal:
230lm
Ángulo:
120°
Grado de la impermeabilización del agua y del polvo: IP20
Clase de protección:
III
Temperatura de funcionamiento:
-20°C hasta + 45°C
Inhaltsverzeichnis
Sprachen:
Andere Eshine Leuchte Handbücher
Beliebte Leuchte Handbücher anderer Marken
Emos
Emos CLASSIC ZY1431T Bedienungsanleitung
Westinghouse
Westinghouse Outdoor Lighting Fixture Bedienungsanleitung
Hedler
Hedler C 12 silent Bedienungsanleitung
Blizzard Lighting
Blizzard Lighting Puck: CSI Bedienungsanleitung
Energetic Lighting
Energetic Lighting ELYSL-5004 Series Bedienungsanleitung
Lightmaxx
Lightmaxx Shaft 5R Bedienungsanleitung
Cooper Lighting
Cooper Lighting Halo L3232E Bedienungsanleitung
Stageline
Stageline ODW-2410RGBW Bedienungsanleitung
Light Sky
Light Sky Tornado Series Bedienungsanleitung
Lightolier
Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung
Lightolier
Lightolier Lytespan 83ED17S Bedienungsanleitung
Lightolier
Lightolier Calculite CS8226 Bedienungsanleitung