ESI PHONORAMA Bedienungsanleitung

USB Phono Preamp for

professional vinyl & tape transfers

User’s Guide

Revision 1, October 2011

www.esi-audio.com

ESI PHONORAMA

INDEX

1. Introduction..................................................................................................................................4

2. Description of PHONORAMA ...................................................................................................4

2.1 Front Panel...........................................................................................................................................................4

2.2 Rear Panel............................................................................................................................................................4

2.3 Minimum System Requirements..........................................................................................................................5

3. Installation....................................................................................................................................5

3.1 Windows XP........................................................................................................................................................5

3.2 Windows Vista / 7................................................................................................................................................7

3.3 Mac OS X ............................................................................................................................................................8

4. PHONORAMA Control Panel....................................................................................................8

5. Audio Applications.......................................................................................................................9

5.1 Windows Multimedia setup...............................................................................................................................10

5.2 Latency setting and ASIO applications under Windows....................................................................................10

6. BIAS SoundSaver Express........................................................................................................10

6.1 Installation under Windows...............................................................................................................................10

6.2 Installation under Mac OS X .............................................................................................................................12

6.3 Authorization .....................................................................................................................................................13

6.4 Audio Setup .......................................................................................................................................................15

7. Technical Specifications ............................................................................................................15

8. General Information..................................................................................................................16

ESI PHONORAMA

1. Introduction

Thank you for choosing the ESI PHONORAMA.

The stylish USB audio adapter allows you to record, transfer and edit your record and tape

collection. Simply connect your turntable to the adjustable phono input and hook it up with a

ground connection wire, and then start recording.

The powerful audio restoration software BIAS SoundSaver Express for Mac and PC is included. It

allows you to easily record your audio collection with unparalleled results. Record signals, clean

them and then export them to iTunes, save them as uncompressed WAV files or export them as

MP3. Archiving your LPs and tapes has never been easier. This package delivers pro-quality results

at an affordable price.

PHONORAMA easily connects to your tape deck or CD player (Line In) and to your turntable with

either moving coil (MC) or moving magnet (MM) systems. It also easily connects to any modern

PC or Mac computer system.

2. Description of PHONORAMA

2.1 Front Panel

The front panel of PHONORAMA contains the following items from left to right:

- right (R) and left (L) channel of the phono & line in; connect this to the output of your tape deck

or turntable

- ground connection; use this connection screw to fix the ground lead of your turntable

- mini USB connector; use this connector to connect PHONORAMA to your PC or Mac using the

supplied USB cable

2.2 Rear Panel

ESI PHONORAMA

The rear panel of PHONORAMA contains the following items from left to right:

- headphone; use this output to connect PHONORAMA to a pair of stereo headphones

- power LED; this LED will show the operation status of PHONORAMA

- left (L) and right (R) peak LED to show when the input signal of the phono & line input reaches

0dB input level

- line level output; use this output to connect PHONORAMA to your amplifier or active monitors

a using a 1/4" TRS stereo cable

2.3 Minimum System Requirements

- Intel CPU (P4 or greater) or compatible AMD CPU with SSE instructions

-(min. 1.5 GHz processor recommended)

- Windows 7/Vista/XP (SP3)

- 2 GB RAM for Windows 7 / Vista or 1 GB RAM for Windows XP

- 55 MB available disk space

- hard drive with 8ms (or faster) access time

- 10MB/minute available disk space for recordings

- QuickTime 7 or greater

Mac

- G5 oder Intel Mac (mind. 1 GHz Prozessor empfohlen)

- Mac OS X 10.5 oder neuer

- 25 MB available disk space

- hard drive with 8ms (or faster) access time

- 10MB/minute available disk space for recordings

- QuickTime 7 or greater

3. Installation

Before installing the drivers of PHONORAMA, we recommend to check on the download section

of www.esi-audio.com for updated drivers.

3.1 Windows XP

Disconnect PHONORAMA before you install the driver if it has been connected already. Then

launch setup.exe from the Windows folder of the included Installation CD or from a download of a

recent driver from our website.

You will now see a dialog as shown on the left picture below. Click Next. You can define the target

directory for the installation now. Confirm it with Next.

ESI PHONORAMA

The installer now informs you that the driver installation will start as shown on the left picture

below. Confirm this with Next. During the following process you will see a dialog box once or

several times that informs you that the driver software has not passed Windows Logo testing. Please

be assured that our drivers have been tested in various different ways and are OK to be used.

Confirm any such dialog with Continue Anyway.

You will now be prompted to connect the hardware on the next dialog that is shown below on the

left. Plug in PHONORAMA. Do not click Next yet. During the driver installation, Windows might

again prompt you to confirm the Windows Logo testing dialog once or several times with Continue

Anway before the driver installation is finalized.

ESI PHONORAMA

You can now finally click OK on the Information dialog. The installation is now finished. To

confirm this, please check if the ESI icon is displayed in the taskbar notification area as shown

below.

If yes, the driver installation has been completed successfully.

3.2 Windows Vista / 7

Disconnect PHONORAMA before you install the driver if it has been connected already. Then

launch setup.exe from the Windows folder of the included Installation CD or from a download of a

recent driver from our website.

When launching the installation, Windows Vista / 7 might prompt a security message. Make sure to

allow the installation. You will then see a dialog as shown on the left picture below. Click Next.

You can define the target directory for the installation now. Confirm it with Next.

The installer now informs you that the driver installation will start as shown on the left picture

below. Confirm this with Next. During the following process you will see a Windows Security

dialog box once or several times that asks you for confirmation to install the driver software.

Confirm any such dialog with Install.

ESI PHONORAMA

You will now be prompted to connect the hardware on the next dialog that is shown below on the

left. Plug in PHONORAMA. Do not click Next yet. Instead, wait a few seconds for the automatic

device driver installation. You can monitor this in the task notification area where Windows Vista /

7 informs that the driver is installed via a bubble message box.

You can now finally click OK on the Information dialog. The installation is now finished. To

confirm this, please check if the ESI icon is displayed in the taskbar notification area as shown

below.

If yes, the driver installation has been completed successfully.

3.3 Mac OS X

Mac OS X already provides support for class compliant USB audio devices such as

PHONORAMA. This means that no software or driver needs to be installed to use PHONORAMA

under Mac OS X. Simply connect the unit with the supplied USB cable to your Mac and you can

start using it.

To make the usage more simple, we provide a control panel application that can be installed from

the included CD (Mac OS X folder) or downloaded on our website. To install it, open the .dmg file

and them drag the PHONORAMA Panel icon into your Applications folder.

Controlling some of the basic options of PHONORAMA under Mac OS X can also be done via the

Audio MIDI Setup utility from Mac OS X.

4. PHONORAMA Control Panel

This chapter describes the PHONORAMA Control Panel. To open the control

panel under Windows double click on the ESI icon in the task notification area.

Under Mac OS X you can launch the control panel from your Applications folder.

The following dialog shows the control panel:

ESI PHONORAMA

The panel has the following functions and sections:

INPUT section: this section controls the input monitoring volume of the incoming signal from the

hardware. A pair of mono faders can be controlled together or individually depending on your

mouse position The Mute button at the bottom allows you to mute the signal. A red Mute button

indicates that the mute function is enabled. When disabled, the button is gray.

Left of the INPUT section is the Line In / MC / MM switch that allows you to select the recording

input source. When Line In is selected, a line level signal (e.g. from a tape deck) is expected. When

MC is selected, a turn table signal with a moving coil system is expected on the input instead. When

MM is selected, a turn table with a moving magnet system can be used.

OUTPUT section: this section controls the playback volume of the playback signal from your audio

applications. The pair of mono faders can be controlled together or individually depending on your

mouse position – perfect for stereo signals. The Mute button at the bottom allows you to mute

playback. A red Mute button indicates that the mute function is enabled. When disabled, the button

is gray.

Between INPUT and OUTPUT is the Mon button that enables the input monitoring. When enabled,

the input signal is audible via the output of PHONORAMA.

Under Mac OS X the Link button in the upper right corner defines if the channels are controlled

individually as mono or as stereo pairs.

5. Audio Applications

This chapter contains basic configuration examples for some popular software applications. Please

also refer to the manual of the audio software you use for detailed information.

ESI PHONORAMA

5.1 Windows Multimedia setup

The Windows Multimedia setup is required if you want to use your PHONORAMA as the main

sound device for Windows multimedia applications. Go to My computer-> Control panel ->

Sounds and Audio Device Properties -> Audio. Select the PHONORAMA entry as your playback

device to make sure that all standard signals are played via the PHONORAMA hardware.

5.2 Latency setting and ASIO applications under Windows

Via Config > Latency in the Control Panel under Windows it is possible to change the latency

setting (also called “buffer size”) for the ASIO driver of PHONORAMA. A smaller latency is the

result of a smaller buffer size. Depending on the typical application (e.g. for playback of software

synthesizers) a smaller latency is an advantage. At the same time, the best latency setting indirectly

depends on the performance of your system. For recording applications, a typical latency buffer size

between 128 and 288 samples is standard. The default value is 256.

The Config > Buffer Number setting in the Control Panel provides an important fine tuning setting

that allows you to tweak system performance. Depending on your computer hardware, you might

need to adjust this setting if you have problems with noise or drop-outs during playback or

recording . Typically on a modern computer system a value of 4 or slightly more or less is perfect

but you might need to check what is best for your computer as every PC is different.

Note that these values have to be setup before launching any audio application using

PHONORAMA.

6. BIAS SoundSaver Express

PHONORAMA ships with SoundSaver Express from BIAS. Use this software to record and restore

your audio material from vinyl and tape.

Before using the software, you need to install it and activate / authorize the installation. This

requires an email address and an active internet connection for your system. Only with

authorization you can use the software.

6.1 Installation under Windows

To install the software under Windows, launch BIAS SoundSaver Express Installer.exe in the

SoundSaver Express folder of the included CD. Then follow the instructions on the screen. After a

short waiting time, the first dialog will be displayed which should be confirmed by clicking Next.

The following information page should also be confirmed with Next.

Inhaltsverzeichnis

Andere ESI Aufnahmegeräte Handbücher

ESI

ESI KeyControl 49 Bedienungsanleitung

ESI

ESI MAYA22 USB Bedienungsanleitung

ESI

ESI NeON Bedienungsanleitung

ESI

ESI U86XT Bedienungsanleitung

ESI

ESI PLANET 22C Bedienungsanleitung

ESI

ESI Waveterminal U24 Bedienungsanleitung

ESI

ESI U46 SE Bedienungsanleitung

ESI

ESI Neva Duo Bedienungsanleitung

ESI

ESI Miditerminal M4U Bedienungsanleitung

ESI

ESI Amber i1 Bedienungsanleitung

ESI

ESI MaXiO 032 Benutzerhandbuch

ESI

ESI RoMI/O Bedienungsanleitung

ESI

ESI ESI2000 Bedienungsanleitung

ESI

ESI Neva Duo Bedienungsanleitung

ESI

ESI Rekord M Bedienungsanleitung

ESI

ESI GIGAPORT eX Bedienungsanleitung

ESI

ESI U46 XL Bedienungsanleitung

ESI

ESI DuaFire Bedienungsanleitung

ESI

ESI NEVA UNO Bedienungsanleitung

ESI

ESI ESU1808 Bedienungsanleitung

ESI

ESI Julia Bedienungsanleitung

ESI

ESI M4U XL Bedienungsanleitung

ESI

ESI Amber i1 Bedienungsanleitung

ESI

ESI QuataFire 610 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch