‘Z’ ‘SA’
SACD/CD - Digital Filter / DDC -
X-01D2
X-03SE
SA-60
SA-10
SZ-1
‘X’
- DF: On (wide) only
- Up-convert: x8 (auto)
- DSD direct: yes
- PCM to DSD convert: yes
- DSD to PCM convert: yes
- DAC mode: Multi-bit/DSD/1bit
- DF: Wide / Narrow
- Up-convert: x8 (auto)
- DSD direct: yes
- PCM to DSD convert: n/a
- DSD to PCM convert: n/a
- DF: Wide / Narrow (for FIR Filter)
- Up-convert: x8 (FIR) / x32 (RDOT+FIR)
- DSD direct: yes
- PCM to DSD convert: yes
- DSD to PCM convert: n/a
- DF: Wide / Narrow
- Up-convert: x8 (auto)
- DSD direct: yes
- PCM to DSD convert: n/a
- DSD to PCM convert: n/a
- DF: On (narrow) only
- Up-convert: x8 (auto)
- DSD direct: n/a
- PCM to DSD convert: n/a
- DSD to PCM convert: n/a
X-05
- DF: Wide or narrow
- PCM up-convert: x8 (auto)
- DSD direct decode: yes
- PCM to DSD convert: n/a
- DSD to PCM convert: n/a
1. DF, up-convert is only used for PCM signal (not DSD signal)
2. ‘Narrow’ means that the filter is ‘sharp roll off’ filter (does not mean that the frequency range is narrow!!) . The ‘Wide’ means ‘slow roll off’ filter.
