Essilor Mr Blue 2.0 Bedienungsanleitung
User Manual
USER MANUAL > CONTENTS
CONTENTS
INTRODUCTION 7
I. FIRST STEPS WITH MR. BLUE 2.0 9
1. Descriptive diagrams 11
2. Using the edger 13
a. Turning on the edger 13
b. Switching off the edger 14
c. Using the touch screen and keypads 14
d. Edging screen 15
II. EDGING A LENS 17
1. Edger working environment 19
a. Menu screen 19
b. Calling up a shape 21
c. Lens set-up and feeling 21
2. Perform a Beveling 23
a. Automatic beveling 24
b. Legend screen for customized bevels 25
c. Customized beveling 26
d. Modifying the bevel curve 27
e. Modifying the bevel curve at a particular point 27
f. Displacing the bevel curve 28
3. High-base beveling 28
a. Captioned screens 29
b. High-base beveling 31
4. Perform a Step beveling (option) 35
a. Mounting of the step bevel tool 37
b. Captioned screens 40
c. Adjusting the Step bevel finish 41
d. Perform a Step bevel 46
5. Grooving 50
a. Automatic grooving 51
b. Customized groove legend screen 51
c. Customized grooving 53
d. Modifying the groove curve 54
e. Modifying a point in the groove curve 54
f. Displacement of the groove curve 55
6. Flat-edge finishing 55
7. Mixed job 56
a. Legend screens 56
b. Configuring the mixed finish 57
8. Drilled job 58
a. Automatic drilling 59
b. Legend screen for customized drilling 60
c. Customized drilling 61
9. Polishing 61
10. Chamfering 62
11. Perform a Retouching 63
III. CONFIGURING THE EDGER 65
USER MANUAL > CONTENTS
1. Configure the edger 67
a. Time, date and language 67
b. Connections 68
c. Screensaver 68
2. Adjusting the precision of the edger 68
a. Adjusting the diameter of the finished lenses 69
b. Adjusting the position of the bevel and groove 70
c. Adjusting the diameter of drill-holes 70
d. Adjusting the chamfer 71
e. Adjusting the groove 72
f. To adjust the engraving 72
g. Adjust the position of high-base bevel 73
h. Adjust the position of the step bevel 74
3. Restore the factory settings 75
IV. MAINTENANCE & SERVICING 77
1. Carrying out the autotests 79
2. Calibrating the touch screen 80
3. Consult the preventive maintenance screen of the “small tools” module 80
4. Changing or cleaning the edger tools 82
a. Changing or cleaning the mill bit 83
b. Changing or cleaning the drill bit 84
c. Changing the engraving tip 86
5. Statistics and technical log 88
a. Edger cycles 88
b. Technical history and errors 90
6. Maintaining and cleaning the edger 90
a. Precautions required 90
b. Clean the door, the GMD module and the wheels (high-base and step bevel) 91
c. Dressing the wheels 91
V. USING TO M’EYE SIGN 93
1. To activate to M’EYE Sign 95
2. To carry out an engraving 97
a. To prepare the engraving 97
b. Performing engraving 107
c. Setting up the favorites 111
3. To produce a creative shape 112
a. On Essibox 112
b. On the edger 119
TECHNICAL DATA 121
1. Edger 122
2. Environment 123
GENERAL INFORMATION 125
1. Symbols 126
2. Modifications 126
3. Declaration of conformity 126
4. Copyright 126
5. Materials and products 126
6. Safety instructions: 127
7. Electromagnetic waves 127
8. License agreement for M’EYE Sign™ (Engraving) software 127
USER MANUAL > CONTENTS
USER MANUAL > INTRODUCTION
Mr Blue 2.0 > v4 -07.16 7
INTRODUCTION
To benefit fully from the functions of your Mr Blue 2.0 edger, we advise you to consult the entirety of this document.
You have memory version: V9.0.0.
Addition of the Step Bevel function.
This function allows you to produce specific bevels adapted to the frames that have an asymmetrical groove.
USER MANUAL > INTRODUCTION
8Mr Blue 2.0 > v4 -07.16
I. FIRST STEPS WITH MR. BLUE 2.0
USER MANUAL > FIRST STEPS WITH MR. BLUE 2.0
10 Mr Blue 2.0 > v4 -07.16
Andere Handbücher für Mr Blue 2.0
1
Inhaltsverzeichnis
Andere Essilor Kantenschneider Handbücher
