1.3 Precautions
•Before y
ou start to operate the device, read the hole attached user`s guide carefully.
•Keep the user`s guide and refer to it in case you operate the device in future.
•Observe all the rules and arnings included in the user`s guide.
•Make sure the device is not damaged in any ay. In case of doubt, do not operate the device and
contact the suppier.
•In case of doubt concerning a safe operation of device, contact the suppier.
•Special attention should be paid to arning signs, housing or packaging of device.
•Operate the device according to its intended use.
•The device is not a toy, children should be prohibited from playing ith it.
•On no account can children play ith any part of the packaging of this device.
•
Children should be prevented from accessing small parts, for example, clamping scre s, pins.
These elements can be found on the equipment of device supplied and in
case of s allo ing they
can lead to the choking of child.
•No mechanical or electrical modifications can be made in the device. Such modifications can
cause the rong operation of device, incompatible ith standards or they can influence the
operation of device in a negative ay.
•No objects should be put into the device through gaps (for example ventialtion gaps). This can
cause short circuit, fire or damage to the device.
•Take care that no ater, moisture, dust and dirt gets into the device. This can cause short circuit,
electrical shock, fire or damage to the device.
•Make sure the device is ventilated properly, do not cover ventilation holes and provide a free flo
of air around it.
•The device should be installed inside the rooms.
•Make sure the device is not exposed to impacts and vibrations.
•Connecting the device, make sure that electric parameters of po er supply net ork are ithin
the operation range of device.
•Any connections must be compatible ith the installation electrical iring diagram and ith
national, or local regulations relating to electrical connections.
•There is no part in this device that can be replaced by the user himself. All service operations
except cleaning and setting up the function, should be carried out by the authorized service staff.
•Before starting any maintenance operations, you must absolutely disconnect the device from
po er supply.
•No benzine, solvents or other chemical agents, hich can damage the housing of device can be
used for cleaning the device. A soft cloth is recommended for this purpose.
estyma electronics
.estyma.pl
page 5
PL20130524
