1.Set
To adjust SD card, brightness, saturation, language, match code, time/date,
a. SD card.
In menu interface, select SD card and press confirm button . Then press right button
for checking capacity, deleting content.
① Check capacity: Press confirm button to see the data, press to quit.
② Delete content: Press confirm button to delete all files then automatically return, pres
to quit.
b. Brightness
In menu interface, select brightness option by pressing right button , then press
confirm button to enter into brightness setup. Press for adjustment, press confirm
button to save and quit.
c. Saturation
In menu interface, press right button to saturation option, then successively press
and to adjust saturation. Press to save and exit.
d. Language.
In menu interface,successively press and to language option. Users can choose
Chinese and English by pressing , press to save and exit.
SD card Brightness Saturation Language
Pair Time/date Camera mode Ring
Check capacity Delete content
China
e. Pair (match code)
In menu interface, successively press and to match code option until “paring”
appear, press pare button (Pic.1) for 10 seconds. After code successfully matched, indoor
monitor shows signal and image. Attention: All wireless products have been matched code
before delivery. There’s no need to match code only if users need to change monitor or
camera.
(Pic.1)
Press the pair button Press the pair button
f. Time/date
In menu interface, successively press and to set time/date menu option, then
press and for setup, and press to select the next number, and so on.
g. Camera mode
In menu interface, successively press and to camera mode menu option. Press
to choose camera mode, then press to save and exit.
Photo Video
