etherFAX A2E Bedienungsanleitung

Guide Version 1.0.1
2015-05-29
etherFAX A2E
User Guide

etherFAX A2E User Guide | 2
© 2015 etherFAX LLC.
Contents
General Overview.................................................................................................................................................4
Device Status Lights........................................................................................................................................5
Device Registration & Initial Setup ....................................................................................................................6
Device Operation .................................................................................................................................................8
Sending a Fax ..................................................................................................................................................8
Receiving a Fax................................................................................................................................................8
Device Configuration ...........................................................................................................................................9
Management via Local Device Web Portal ....................................................................................................9
System Settings ....................................................................................................................................... 10
Advanced Configuration...................................................................................................................... 11
Network Settings...................................................................................................................................... 12
Device Information................................................................................................................................... 13
Service Information ................................................................................................................................. 14
Service Logging.................................................................................................................................... 14
Service Control..................................................................................................................................... 14
System Tools ............................................................................................................................................ 15
System Firmware ..................................................................................................................................... 15
Installing New Firmware ..................................................................................................................... 15
System Reboot ......................................................................................................................................... 16
Management via etherFAX Client Portal .................................................................................................... 17
Multi-Device Edit ...................................................................................................................................... 17
Device Inventory Report .......................................................................................................................... 17
Single Device Edit..................................................................................................................................... 18
Assigning DID’s/TFN’s to a device ..................................................................................................... 18

etherFAX A2E User Guide | 3
© 2015 etherFAX LLC.
This page intentionally left blank.

etherFAX A2E User Guide | 4
© 2015 etherFAX LLC.
General Overview
Organizations transitioning to IP-based networks need a cost-effective solution to integrate existing fax
machines. etherFAX analog-to-etherFAX (A2E) offers a simple, plug-and-play device that allows any
traditional fax machine to be extended to the etherFAX network. The etherFAX A2E, manufactured by
MultiTech, connects existing analog fax machines to the etherFAX network, allowing faxes to be sent
and received via the cloud, instead of the PSTN. The device allow organizations to leverage existing IT
infrastructure and eliminate the cost and maintenance of fax lines.

etherFAX A2E User Guide | 5
© 2015 etherFAX LLC.
Device Status Lights
Connected to etherFAX
Polling/Communication with etherFAX
Receive Activity
Send Activity
Device Initialization
Power

etherFAX A2E User Guide | 6
© 2015 etherFAX LLC.
Device Registration & Initial Setup
When shipped from etherFAX the device will be provisioned to your etherFAX account. Before
connecting the device to a power source and network you will want to ensure that it has been assigned
correctly to your etherFAX account and the desired DID’s or TFN’s (Toll-Free Numbers) have been
provisioned to the etherFAX A2E.
Using the supplied cabling connect the RJ-11 telephone cable to the RJ-11 port on the back of the
etherFAX A2E and the other end into the Line port on the analog fax device you wish to use. Connect
the supplied Ethernet cabling to the RJ-45 port on the back of the etherFAX A2E and the other end into
an active network jack. When ready to power on the device use the supplied power adapter to attach to
the power port on the etherFAX A2E and plug into an available power outlet.
The etherFAX A2E is configured for DHCP. If your network supports DHCP the device will be assigned a
local IP address which will appear in the etherFAX Client Portal. To access this navigate to
https://clients.connect.etherfax.net in an internet browser. Provide your client portal login credentials
to sign in. Once logged in select A2E Devices from the navigation menu on the left side of the screen.
From the Device Management page you will be able to determine if your device has received an IP
address from the DHCP server in your local network. Further configuration of the device from the
etherFAX Client Portal is discussed later in this guide.
If your network does not support DHCP or the etherFAX A2E is not able to obtain an IP address through
DHCP the device will timeout after two minutes and revert to a local IP of 192.168.2.1. The device can
then be accessed through a direct network connection with a computer. The computer connected
directly with the device will need to have its IP parameters set manually to the following settings:
Local IP Address: 192.168.2.10
Subnet: 255.255.255.0
Gateway: 192.168.2.1

etherFAX A2E User Guide | 7
© 2015 etherFAX LLC.
After the settings are configured on the computer and a direct network connection is made via Ethernet
cable between the etherFAX A2E and the computer the etherFAX A2E local device portal will be
accessible through an internet browser by navigating to http://192.168.2.1. Login using the default
credentials:
Username: admin
Password: password
To configure the device’s network settings manually select Settings then Network from the navigation
menu on the left side of the screen. See figure on next page.
From the Network Settings configuration page you can disable DHCP and assign a static IP, network
mask, gateway, and DNS servers. Once configured hit Save.

etherFAX A2E User Guide | 8
© 2015 etherFAX LLC.
Device Operation
The etherFAX A2E preserves the traditional user experience while extending the reliability and security
of the etherFAX network to an analog fax device.
Sending a Fax
Users will load a fax into the document feeder and dial the number as they normally would. The analog
fax device will connect to the etherFAX A2E via the RJ-11 cable and transmit the fax image. Once the
image is received at the etherFAX A2E it will securely push the image to the etherFAX network where
the document will be transmitted to its final destination.
Upon completion of sending, the device administrator can elect receive a transmission report when the
fax was sent successfully, an error occurred, both on a success or error, or never. These options can be
configured via the etherFAX Client Portal. Configuration steps are covered in the Device Configuration
section of this guide.
Note: It is important to ensure that transmission reports are disabled on the analog fax device as the
etherFAX A2E will generate the reports.
Receiving a Fax
When a fax is received to a number on the etherFAX network that is assigned to a specific A2E device
the etherFAX A2E will securely retrieve the image file and then begin communication with the local
analog fax device. The fax image will be transmitted and received to the local fax device just as it would
if it was connected to a traditional analog fax line. For more information on provisioning a number to an
etherFAX A2E device please see the ‘Management via etherFAX Client Portal’ section later in this
document.
Note: It is important to ensure that auto-answer is enabled on the analog fax device. This will allow the
analog fax device to receive all communication from the etherFAX A2E.

etherFAX A2E User Guide | 9
© 2015 etherFAX LLC.
Device Configuration
The etherFAX A2E device can be managed from two different locations. The device itself has a local
device portal that can be accessed via a standard HTTP connection to the device’s IP address on port
80. The local device portal assists in configuring the device for network communication and device
specific updates such as firmware. It also provides a logging interface and basic network utilities to
assist in troubleshooting.
Other functions of the etherFAX A2E such as DID provisioning are managed from the etherFAX Client
Portal at https://clients.connect.etherfax.net. Multi-device configuration is also available from the
etherFAX Client Portal allowing some settings to be applied to multiple devices at one time.
Management via Local Device Web Portal
The etherFAX A2E local device portal can be accessed by launching a web browser and navigating to
the IP address of the device (ex: http://10.0.0.100). If the IP address of the device is not known or a
DHCP address was not assigned please refer to the ‘Device Registration and Initial Setup’ section in
this guide to manually configure network settings.
Default Username: admin
Default Password: password
Note: For security, please update your password once logged in by clicking the ‘System Administrator’
profile in the top right of the device portal and choosing ‘Change Password’.

etherFAX A2E User Guide | 10
© 2015 etherFAX LLC.
System Settings
The system settings allow you to update the device configuration locally. Ensure to click Save button
after updating any settings and then select Test Connection to validate any updated settings.
Service Address: Connection string used by the device to connect to the desired etherFAX POP (Point
of Presence) Available options:
https://na.connect.etherfax.net/rest/2.0/api
https://ca.connect.etherfax.net/rest/2.0/api
Account: etherFAX account the device is configured to use. In most cases this will be left blank since
the device securely communicates and registers via an authentication token, thus not needing the
account number.
User: etherFAX user account the device is configured to use. In most cases this will be left blank since
the device securely communicates and registers via an authentication token, thus not needing the
account number.
Password: etherFAX account password the device is configured to use. In most cases this will be left
blank since the device securely communicates and registers via an authentication token, thus not
needing the account number.
Send: Enables the device for send fax functionality.
Receive: Enables the device for receive fax functionality.
Skip Lines: Defines number of raster lines that will be removed from top of page. This allows the fax
header placed on the image by the analog fax machine to be skipped and replaced with the header
supplied by etherFAX.
Reporting: Configures the desired type of reporting for device send transmissions.
Inhaltsverzeichnis
Beliebte Modem Handbücher anderer Marken

Davicom
Davicom DM562AP Bedienungsanleitung

EpiValley
EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte
Zte WiMAX Bedienungsanleitung

Intelimax
Intelimax MA-2060 Bedienungsanleitung

SMC Networks
SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra
Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

US Robotics
US Robotics 3453C Bedienungsanleitung

MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte
Zte MF823 Bedienungsanleitung

Four-Faith
Four-Faith F1403 Bedienungsanleitung

Sierra Wireless
Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek
Gemtek WiMAX WIXFBR-103 Bedienungsanleitung





