Etisalat iModem Bedienungsanleitung
iModem
Quick Start Guide
Getting to Know Your Device
Appearance
The following gure is for your reference only.
1. *External antenna connectors (not all the
devices support)
2. Charging/micro-USB jack
3. Indicator light
4. Power key
• Press and hold for about 3 seconds to power
on/off your device.
• Press and hold for about 10 seconds to
restart your device.
1
Getting to Know Your Device
5. WPS key
Press and hold for 3 seconds to activate the
WPS function.
6. micro-SIM card slot and reset hole
Indicator lights
Indicator Status Description
Battery
Red solid /
blinking
The battery is low.
Please
charge the battery.
Green
blinking
The battery is being
charged.
Green solid The battery level is
middle or high.
Light off
Your device is not
being
charged.
2
Getting to Know Your Device
Indicator Status Description
Wi-Fi Blue solid Wi-Fi is active.
Blue blinking WPS is active.
Light off Wi-Fi is off.
SMS
Blue solid You have unread
messages.
Blue blinking You have new
messages.
Light off
There is no unread
message or new
message.
3
Indicator Status Description
Network
Red
Error status. Not
registered to the
mobile network,
no micro-SIM card
inserted or no network
service available.
Green solid Registered to the
2G/3G mobile network
Green
Blinking
Connected to the
2G/3G mobile network
and data is being
transferred.
Blue solid Registered to the 4G
LTE network.
Blue
Blinking
Connected to the 4G
LTE network and data
is being transferred.
Getting to Know Your Device
4
Getting to Know Your Device
Connection Scenarios
The device allows multiple clients to surf on the
Internet at the same time. The following gure is
for your reference only. A micro-SIM card can be
used to access the Internet.
5
Installing Your Device
1. Open the micro-SIM card cover.
NOTE:
Do not remove the cover rudely, because it is
connected with the device.
6
Installing Your Device
2. Install a micro-SIM card to the micro-SIM card
slot.
WARNING!
Your device does not support SIM cards, nano-
SIM cards or any other non-standard micro-SIM
cards. To avoid damage to the device, do not use
those cards or any card holders.
3. Close the micro-SIM card cover.
7
Connecting to Your Device
Using Wi-Fi
1. Power on your device.
2. Ensure that your computer or other client
devices have enabled Wi-Fi, and search for
available wireless networks
NOTE:
Refer to your Wi-Fi-enabled client device manual
for further details on how to search for wireless
networks. If you use a computer, you need
to set your computer to obtain an IP address
automatically.
3. Select the Wi-Fi name (SSID) of your device,
and click Connect.
4. Enter the Wi-Fi password if necessary, and
click OK.
8
Connecting to Your Device
NOTE:
Refer to the chapter Getting to Know the Wi-Fi
SSID and Password to get the default Wi-Fi SSID
and password.
5. Wait until the client device is connected to
your device successfully.
Using a USB Cable
1. Connect a computer to your device with a
USB cable.
2. Power on your device. The operating system
detects and identifies new hardware, and
automatically installs the software.
NOTE:
If the system does not automatically launch
installation, you can double-click the device
installation icon in My Computer to install the
software.
3. Wait until the computer is connected to your
device successfully.
9
Andere Handbücher für iModem
1
Inhaltsverzeichnis
Andere Etisalat Modem Handbücher
Beliebte Modem Handbücher anderer Marken
Davicom
Davicom DM562AP Bedienungsanleitung
EpiValley
EpiValley TATA indicom SXC-1080 Bedienungsanleitung
Zte
Zte WiMAX Bedienungsanleitung
Intelimax
Intelimax MA-2060 Bedienungsanleitung
SMC Networks
SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch
Telstra
Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung
US Robotics
US Robotics 3453C Bedienungsanleitung
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung
Zte
Zte MF823 Bedienungsanleitung
Four-Faith
Four-Faith F1403 Bedienungsanleitung
Sierra Wireless
Sierra Wireless AIRLINK MP595W Bedienungsanleitung
Gemtek
Gemtek WiMAX WIXFBR-103 Bedienungsanleitung