eufy Security T8400 Bedienungsanleitung
QUICK START
GUIDE
Indoor Cam 2K
Anker Innovations Limited.All rights reserved. eufy Security and eufy Security Logo are
trademarks of Anker Innovations Limited, registered in the United States and other
countries.All other trademarks are the property of their respective owners.
51005002219 V01
English 01
Table of Contents
What’s Included 02
Product Overview 03
Setting up the System 04
Mounting the Indoor Cam 05
Powering on the Indoor Cam 09
Notice 10
English 01
Deutsch 14
Español 24
Français 34
Italiano 44
Nederlands 54
日本語 64
73
02 English English 03
WHAT’S INCLUDED
Indoor Cam 2K × 1
Model:T8400
Mounting Plate × 1
USB Cable × 1
USB Adapter × 1
Mounting Screw Pack × 1
QSG x 1
PRODUCT OVERVIEW
Indoor Cam 2K
1
2
3
4
6
5
7
①Microphone
②Lens
③Status LED
④SD card slot
⑤Speaker
⑥SYNC button
⑦Power input
04 English English 05
SETTING UP THE SYSTEM
1.Download the eufy Security app from the App Store (iOS
devices) or Google Play (Android devices).
2. Sign up a eufy Security account. Go to the app homepage. Tap
Add Device, and add the Indoor Cam to your system.
3. Follow the on-screen instructions to complete the setup.
LED Status
LED Status Description
Breathing blue Ready for setup
Solid blue Powered on and working properly
Blinking red slowly Disconnected from the internet
Blinking red once Motion or sound detected
Solid red Working properly with someone viewing
the live stream or recording event
Solid bluish violet System is initializing
Flashing blue and red
alternately
Firmware upgrade in progress
MOUNTING THE INDOOR CAM
Select a Location for Mounting
The camera can be placed on a table, shelf, or can be mounted on
a wall or ceiling. Select a location and height where you can get the
desired view, and can reach a power outlet easily.
06 English English 07
> 20CM > 20CM
• Disconnect the Indoor Cam from the power outlet
before mounting.
• Keep the Indoor Cam at least 0.7 ft / 20 cm away
from walls or anything that may obstruct the view.
Do this to avoid infrared reection which can have a
negative impact on the night vision performance.
Mount the Indoor Cam
The Indoor Cam can be mounted on the wall or ceiling.
To mount the Indoor Cam on the wall:
1.Align the positioning card and then mark the points at which
drilling will be required.
Wall
UP
DOWN
2. Drill holes with a 15/64” (6 mm) drill bit.
Wall
08 English English 09
3. Align the holes on the mounting plate with those on the wall,
matching the direction as UP and Down indicates. Insert the anchors
into the holes; anchors are necessary for walls that are made out of
hard materials such as concrete, brick, or stucco. Fix the screws with a
Phillips-head screwdriver to fasten the mounting plate onto the wall.
Wall
4. Align the Indoor Cam’s mounting slot with the mounting plate, and
then push the camera down until it clicks into place.
To mount the Indoor Cam on the ceiling, follow the steps 1-4 to
secure the camera base onto the mounting plate.
POWERING ON THE INDOOR CAM
Connect the Indoor Cam to the power outlet using the provided
USB cable and USB adapter.After powered on, the Indoor Cam will
be connected to the system. When it is successfully connected, the
status LED will turn solid blue.
Rotate the Indoor Cam to adjust the view by checking the live
streams in the eufy Security app.You are all set to use the Indoor
Cam.
For troubleshooting, check Help on the eufy Security
app. Refer to the app page for LED indicator status.
10 English English 11
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Warning: Changes or modications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation
between the equipment and receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. (4) Consult the dealer or
an experienced radio/ TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements.The device
can be used in xed/mobile exposure condition. The min separation distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to
maintain compliance with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400,Bellevue,WA 98004-5541
Telephone:1-800-988-7973
This product complies with the radio interference requirements of the
European Community.
Declaration of Conformity
Hereby,Anker Innovations Limited declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.For the
declaration of conformity, visit the Web site:
https://www.eufylife.com/.
This product can be used across EU member states.
The adapter shall be installed near the equipment and shall be easily accessible.
Do not use the Device in the environment at too high or too low temperature, never
expose the Device under strong sunshine or too wet environment.
The suitable temperature forT8400 and accessories is 0°C-40°C.
When charging, please place the device in an environment that has a normal room
temperature and good ventilation.
It is recommended to charge the device in an environment with a temperature that
ranges from 5°C~25°C.
Please ensure to use only the charger offered by the manufacturer. Using unauthorized
charger may cause danger and violate the authorization of the device and the guarantee
article.
12 English English 13
This charger is for indoor use only.
The charger type is TEKA006-0501000EU , output voltage/current is 5Vdc/1A.The plug
considered as disconnect device of adapter.
RF exposure information:The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human body.To
maintain compliance with RF exposure requirement, use product that maintain a 20cm
distance between the device and human body.
Wi-Fi Operating Frequency Range:2412~2472MHz ;Wi-Fi Max Output Power:
17.20dBm (EIRP)
Bluetooth Operating Frequency Range: 2402~2480MHz; Bluetooth Max Output Power:
-4.01dBm (EIRP)
The following importer is the responsible party (contact for EU matters only)
Importer:AnkerTechnology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205 Kings Road,Tyseley, Birmingham, B11 2AA,
United Kingdom
This product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste,
and should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health
and the environment.For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where
you bought this product.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device."
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement."
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps an de vous
conformer aux exigences en matière d'exposition RF.
Deutsch 1514 Deutsch
Inhaltsverzeichnis
Im Lieferumfang 15
Produktübersicht 16
Einrichten des Systems 17
Montage der Indoor Cam 18
Einschalten der Indoor Cam 22
IM LIEFERUMFANG
1 Indoor Cam 2K
Modell:T8400
1 Montageplatte
1 USB-Kabel
1 USB-Adapter
1 Paket Befestigungsschrauben
Benutzerhandbuch
Deutsch 1716 Deutsch
PRODUKTÜBERSICHT
Indoor Cam 2K
1
2
3
4
6
5
7
①Mikrofon
②Objektiv
③Status-LED
④SD-Kartensteckplatz
⑤Lautsprecher
⑥SYNC-Taste
⑦Stromversorgungseingang
EINRICHTEN DES SYSTEMS
1. Laden Sie die eufy Security-App aus dem App Store (iOS-Geräte)
oder bei Google Play (Android) herunter.
2.Richten Sie ein eufy Security-Konto ein. Navigieren Sie zur
Startseite der App.Tippen Sie auf "Gerät hinzufügen", und fügen Sie
die Indoor Cam zu Ihrem System hinzu.
3.Befolgen Sie die Bildschirmanweisungen, um die Einrichtung
abzuschließen.
Andere Handbücher für T8400
1
Inhaltsverzeichnis
Andere eufy Security Digitalkamera Handbücher
eufy Security
eufy Security T8424 Bedienungsanleitung
eufy Security
eufy Security S300 Bedienungsanleitung
eufy Security
eufy Security T8151 Bedienungsanleitung
eufy Security
eufy Security CAM 2C Bedienungsanleitung
eufy Security
eufy Security eufyCam 2 Pro Bedienungsanleitung
eufy Security
eufy Security SoloCam C210 Bedienungsanleitung
eufy Security
eufy Security EUFYCAM 2C Bedienungsanleitung
eufy Security
eufy Security eufyCam S330 Bedienungsanleitung
eufy Security
eufy Security FLOODLIGHT CAM 2 PRO Bedienungsanleitung
