9
7. LED Button / Night light
The fan speed is indicated by the colorful light. The colour of
the light is selectable and can be deactivated with this
button.
8. Ionizer Mode Button
The Ionizer function can be set ON/OFF，10－min intermittent
mode.
9. Timer Button
The Timer can be set at 1, 3, 5，8 hours. Default is set at 3 hours.
10. Anti-Pollen Mode Button
The Anti-Pollen function sets the fan speed in a cycle of
Medium speed (5 minutes) and Low speed (5 minutes).
11. Child Lock Button
When this button is pressed, all the buttons on the Air Purifier
and Remote Control transmitter are disabled, except the
LOCK button on the Remote Control. To deactivate this mode
without the Remote Control, unplug the power supply and
re-plug the power again.
12．Auto Button
Press the ON/OFF button on the Control Panel, or the "Auto
Mode" button on the Remote Control, to set this machine into
Auto Mode. The machine will run according to the current
condition of air quality．
Note: A slight odour may be emitted initially when a new Air
Purifier is used. Do not be alarmed. Just operate the unit in a
well-ventilated room for a while until the smell disappears. This is
caused by the new Nano TiO coating on the Photocatalytic filter.
2
Care and Maintenance
1. To maintain optimum performance of this appliance, clean
the Pre-filter every month. Frequency of maintenance will
depend on the quality of the air in the room.
2. Be sure to unplug the power cord before cleaning the unit and
never handle the power plug with wet hands.
3. Remove the front cover, Wipe with a damp, soft cloth.
Do NOT use volatile fluids or petrochemicals for cleaning.
For stubborn stains, use mild kitchen clean e r s o r
dishwashing liquid diluted with warm water. Use of strong or
corrosive cleaners may discolour unit permanently. Do not
use hot water.
