Eureka OTC Bedienungsanleitung

www.eurekatents.com fax: 607.779.2291

REV.B 8.06

OTC Frame Canopy

A “Do-It-Yourself” frame canopy with one piece, easy set up

color-coded brackets, and shockcorded poles with snap buttons.

Fits in the trunk of most cars. Available in many sizes and colors.

Available in: 10' x 10', 10' x 20', 15' x 15' and 20' x 20'

White, Yellow/White, Green/White, Red/White and Blue/White

www.eurekatents.com fax: 607.779.2291

REV.B 8.06

OTC Frame Canopy

10 X 10 FRAME CANOPY

We recommend :

• two people for set up,

• that you wear gloves,

• that whenever you assemble a tent

with hardware at or above the

shoulders, you wear a hard hat.

Our frame canopy parts are shockcorded

together, and color-coded for fast, easy set up.

LAY OUT THE PARTS:

Ope

n the parts bags and separate and organize the

pieces of the frame on the ground. Start with the center

cluster and the corner brackets.

Match color dots on the poles and pole assemblies

to the color dots on the center cluster and the corner

brackets.

Note:

The poles that are not color-coded are the top

sections for the legs. Set these aside.

RAFTERS:

Start at the center cluster. Match the poles with

the BLUE dots to the #4 cluster arm with BLUE dots.

Depress a snap button and fit the poles onto the

bracket, BLUE to BLUE. Rotate the pole to align the

button with the hole on the bracket and snap into

place.

. Connect the other end of these same poles to the

corner brackets, GREEN to GREEN and snap in place.

PERIMETER:

The perimeter sections of the frame are two piece poles,

shockcorded together, and labeled with a YELLOW dot

on each end.

Slide each end of a perimeter pole into a corner

bracket, YELLOW to YELLOW and snap in place.

Connect shockcorded section of each perimeter pole.

. Continue this assembly around the entire tent.

CANOPY TOP:

Unroll the canopy top on a drop cloth and then position

it over the frame. Make sure the corners of the canopy

are lined up over the corners of the frame.

LEGS:

The poles that are not color-coded are the top leg

sections.

Insert each top leg section into a corner bracket

— work clockwise around your tent.

When complete, stand under the canopy and fasten

the canopy top in place by securing the straps and

buckles around the perimeter of the frame. Snap the

buckles together. Pull the straps to tighten and secure

in place.

Attach a foot plate to each leg of the tent and snap

it in place.

STAKES AND GUY ROPES:

Stakes and extra guy ropes are provided. Staking the

frame is required to ensure structural stability.

Tie sliders to the guy ropes.

To work, they must be

attached one way only.

Follow the illustration on

the right.

SEE SCHEMATICS ON

FOLLOWING PAGE.

To disassemble the Frame

Canopy reverse the

above procedure.

www.eurekatents.com fax: 607.779.2291

REV.B 8.06

OTC Frame Canopy

YELLOW TO

YELLOW

BLUE TO BLUE

GREEN TO

GREEN

10 X 10

www.eurekatents.com fax: 607.779.2291

REV.B 8.06

OTC Frame Canopy

10 X 20 FRAME CANOPY

We recommend :

• two people for set up,

• that you wear gloves,

• that whenever you assemble a tent

with hardware at or above the

shoulders, you wear a hard hat.

Our frame canopy parts are shockcorded

together, and color-coded for fast, easy set up.

LAY OUT THE PARTS:

Open the parts bags and separate and organize the

pieces of the frame on the ground. Start with the three

way clusters, intermediate and corner brackets.

Match color dots on the poles and pole assemblies

to the color dots on the clusters and brackets.

Note:

The poles without color dots are the top sections

for the legs. Set these aside.

RAFTERS:

Match the two poles with the ORANGE dots to the

intermediate bracket. Depress a snap button and fit the

pole onto the bracket, ORANGE to ORANGE. Rotate the

pole to align the button with the hole on the bracket and

snap into place.

Slide the other end of these poles onto an arm of

each three way cluster, BROWN to BROWN. Snap into

place.

Slide both intermediate rafters to the intermediate

bracket, BLACK to BLACK. Snap in place.

Assemble the shockcorded sections of the rafters.

Connect the other end of these rafters to the

intermediate perimeter brackets RED to RED.

Slide the rafters onto an arm of each three way

cluster, BLUE to BLUE. Snap in place.

Connect the other end of these rafters to the corner

brackets, GREEN to GREEN. Snap in place.

PERIMETER:

The two piece perimeter poles are labeled with a yellow

dot on each end.

At a gable end of the tent, slide each end of a

perimeter pole into its corresponding corner bracket,

YELLOW to YELLOW and snap in place.

Assemble the shockcorded sections of these

perimeter poles.

At a side, slide an end of a perimeter pole into a

corner bracket, YELLOW to YELLOW and the other end

into an intermediate bracket, YELLOW TO YELLOW.

Snap in place.

Assemble the shockcorded sections of these

perimeter poles.

Continue this assembly around the entire tent.

CANOPY TOP:

Unroll the canopy top onto a drop cloth and then position

it over the frame. Make sure the corners of the canopy

are lined up over the corners of the frame.

LEGS:

The poles that are not color-coded are the top leg

sections.

Insert each top leg section into a corner bracket

— work clockwise around the tent.

When complete, stand under the canopy and

fasten the canopy top in place by securing the straps

and buckles around the perimeter of the frame. Snap

the buckles together. Pull the straps to tighten and

secure in place.

Attach a foot plate to each leg of the tent. Snap in place.

STAKES AND GUY

ROPES:

Stakes and extra guy ropes

are provided. Staking the

frame is required to ensure

structural stability.

Tie sliders to the guy ropes.

To work, they must be

attached one way only.

Follow the illustration on

the right.

SEE SCHEMATICS ON

FOLLOWING PAGE.

To disassemble the Frame Canopy, reverse the above

procedure.

www.eurekatents.com fax: 607.779.2291

REV.B 8.06

OTC Frame Canopy

BLUE TO

BLUE

BLACK TO

BLACK

ORANGE TO

ORANGE

GREEN TO

GREEN

BROWN TO

BROWN

YELLOW TO

YELLOW

RED TO RED

10 X 20

www.eurekatents.com fax: 607.779.2291

REV.B 8.06

OTC Frame Canopy

15 x 15 FRAME CANOPY

We recommend :

• two people for set up,

• that you wear gloves,

• that whenever you assemble a tent

with hardware at or above the

shoulders, you wear a hard hat.

Our frame canopy parts are shockcorded

together, and color-coded for fast, easy set up.

Do not connect the shockcorded sections

together until so instructed.

LAY OUT THE PARTS:

Unpack the pole bag and lay out the pieces of the

frame on the ground. Start with the center eight-way

cluster, then corner brackets and finally intermediate

brackets.

. Match the color dots on the poles and pole

assemblies to the color dots on the center cluster,

corner brackets, and intermediate brackets.

NOTE:

Those poles not color-coded are the top

sections of the legs.

RAFTERS:

Depress the snap button and fit the poles onto

the center eight-way cluster. Match BLUE to BLUE.

Rotate the pole to align the button with the hole and

snap into place.

Connect the other end of these poles to the

corner brackets, GREEN to GREEN. Snap into place.

Assemble the shockcorded sections of the poles.

Fit the rafters onto the cluster and snap into

place, WHITE to WHITE.

Connect the other end of these rafters to the

intermediate brackets, RED to RED. Snap into place.

Assemble the shockcorded sections of the rafters.

PERIMETER:

The perimeter sections of the frame are the two piece

poles, shockcorded together and color-coded with a

yellow dot on each end.

Connect the perimeter sections to the corner

brackets, YELLOW to YELLOW . Snap into place.

Connect the perimeter sections to intermediate

brackets, YELLOW to YELLOW. Snap into place.

Connect the shockcorded center of each

perimeter pole.

Continue the connections around the entire tent.

CANOPY TOP:

Unpack the canopy bag. Unroll the canopy top onto a

drop cloth and then position it over the frame. Make

sure that the corners of the canopy are aligned over

the corners of the frame.

LEGS:

The poles with no color dots are the top sections of

the legs.

Insert one top leg section into each corner and

intermediate bracket – work clockwise around the

tent.

Stand under the canopy and fasten the canopy

top to the frame. Secure each strap and buckle

around the perimeter of the frame. Snap the buckles

together. Pull the straps to tighten.

Attach a foot plate to each leg of the tent – snap

in place.

STAKES AND GUY ROPES :

Stakes and extra guy ropes

are provided. Staking the

frame is required to ensure

structural stability.

Tie sliders to the guy ropes.

To work, they must be

attached one way only.

Follow the illustration on

the right.

SEE SCHEMATICS ON

FOLLOWING PAGE.

To disassemble the Frame

Canopy, reverse the

above procedure.

www.eurekatents.com fax: 607.779.2291

REV.B 8.06

OTC Frame Canopy

BLUE TO

BLUE

GREEN TO

GREEN

YELLOW TO

YELLOW

YELLOW TO

YELLOW

RED TO

RED

WHITE TO

WHITE

15 X 15

www.eurekatents.com fax: 607.779.2291

REV.B 8.06

OTC Frame Canopy

20 x 20 FRAME CANOPY

We recommend :

• two people for set up,

• that you wear gloves,

• that whenever you assemble a tent

with hardware at or above the

shoulders, you wear a hard hat.

Our frame canopy parts are shockcorded

together, and color-coded for fast, easy set up.

Do not connect the shockcorded sections

together until so instructed.

LAY OUT THE PARTS:

Unpack the pole bag and lay out the pieces of the

frame on the ground. Start with the center eight-way

cluster, then corner brackets and finally intermediate

brackets.

Match the color dots on the poles and pole

assemblies to the color dots on the center cluster,

corner brackets, and intermediate brackets.

NOTE:

Those poles not color-coded are the top

sections of the legs.

RAFTERS:

. Depress the snap button and fit the poles onto

the center eight-way cluster. Match BLUE to BLUE.

Rotate the pole to align the button with the hole and

snap into place.

Connect the other end of these poles to the

corner brackets, GREEN to GREEN. Snap into place.

Assemble the shockcorded sections of these poles.

Fit the rafters onto the cluster and snap into

place, WHITE to WHITE.

Connect the other end of these rafters to the

intermediate brackets, RED to RED. Snap into place.

Assemble the shockcorded sections of the rafters.

PERIMETER:

The perimeter sections of the frame are the two piece

poles, shockcorded together and color-coded with a

dot on each end.

Connect the perimeter sections to the corner

brackets, YELLOW to YELLOW . Snap into place.

Connect a perimeter section to an intermediate

bracket, YELLOW to YELLOW. Sn ap into place.

Connect the shockcorded center of the perimeter

section.

Continue the connections around the entire tent.

CANOPY TOP:

Unpack the canopy bag. Unroll the canopy top onto a

drop cloth and then position it over the frame. Make

sure that the corners of the canopy are aligned over

the corners of the frame.

LEGS:

The poles with no color dots are the top sections of

the legs.

Insert one top leg section into each corner and

intermediate bracket – work clockwise around the

tent.

Stand under the canopy and fasten the canopy

top to the frame. Secure each strap and buckle

around the perimeter of the frame. Snap the buckles

together. Pull the straps to tighten.

Attach a foot plate to each leg of the tent – snap

in place.

STAKES AND GUY ROPES :

Stakes and extra guy ropes

are provided. Staking the

frame is required to ensure

structural stability.

Tie sliders to the guy ropes.

To work, they must be

attached one way only.

Follow the illustration on

the right.

SEE SCHEMATICS ON

FOLLOWING PAGE.

To disassemble the Frame

Canopy, reverse the

above procedure.

www.eurekatents.com fax: 607.779.2291

REV.B 8.06

OTC Frame Canopy

BLUE TO

BLUE

GREEN TO

GREEN

YELLOW TO

YELLOW

YELLOW TO

YELLOW RED TO

RED

WHITE TO

WHITE

20 x 20

www.eurekatents.com fax: 607.779.2291

REV.B 8.06

OTC Frame Canopy

DESCRIPTION

DESCRIPTION DESCRIPTION

QNTY

PRODUCT CODE

WHITE

YELLOW/W

GREEN/W

RED/W

BLUE/W

PARTS & ASSEMBLIES

10X10 1 PC TOP

2420140

2420142

2420148

2420144

2420145

10X10 H.D. FRAME

2470201

24" STEEL STAKES

2470002

15X15 1 PC TOP

2420340

2420342

2420348

2420344

2420345

15X15 H.D. FRAME

2470216

24" STEEL STAKES

2470002

10X20 1PC TOP

2420220

2420222

2420228

2420224

2420225

10X20 H. D. FRAME

2470211

24" STEEL STAKES

2470002

20X20 1 PC TOP

2420440

2420442

2420448

2420444

2420445

20X20 H.D. FRAME

2470221

24" STEEL STAKES

2470002

NON CATALOG SIZES

20X30 1PC TOP

2420540

2420542

2420548

2420544

2420545

20X30 H.D. FRAME

2470231

24" STEEL STAKES

2470002

Andere Eureka Zelt Handbücher

Eureka

Eureka Equinox 6 Bedienungsanleitung

Eureka

Eureka Grand Manan Tour Bedienungsanleitung

Eureka

Eureka Apex XT Bedienungsanleitung

Eureka

Eureka Copper Canyon 10 Bedienungsanleitung

Eureka

Eureka EVOLUTION WR Betriebsanleitung

Eureka

Eureka Wild Basin 4 Stücklistenhandbuch

Eureka

Eureka N!ergy 1310 Bedienungsanleitung

Eureka

Eureka alpenlite 2XT Bedienungsanleitung

Eureka

Eureka MGPTS TYPE I Montageanleitung

Eureka

Eureka 2628819 Benutzerhandbuch

Eureka

Eureka Copper Canyon 1312 Bedienungsanleitung

Eureka

Eureka Sunrise EX 4 Handbuch

Eureka

Eureka Tessel Bedienungsanleitung

Eureka

Eureka Grand Manan 9 Bedienungsanleitung

Eureka

Eureka Genesis Bedienungsanleitung

Eureka

Eureka Apex XT Bedienungsanleitung

Eureka

Eureka Grand-Annex Bedienungsanleitung

Eureka

Eureka Tundraline Installationsanleitung

Eureka

Eureka JUNO 3XTA Bedienungsanleitung

Eureka

Eureka Copper Canyon 1312 Bedienungsanleitung

Eureka

Eureka Assault Outfitter 08 Bedienungsanleitung

Eureka

Eureka Backcountry 1 Bedienungsanleitung

Eureka

Eureka N!ergy Portable Canopy Bedienungsanleitung

Eureka

Eureka Tetragon 1610 Bedienungsanleitung

Beliebte Zelt Handbücher anderer Marken

OZTENT

OZTENT JV SIGNATURE EDITION Bedienungsanleitung

GigaTent

GigaTent Summer Chalet Mini Tent Bedienungsanleitung

ShelterLogic

ShelterLogic 107153 Bedienungsanleitung

Outsunny

Outsunny 84C-230 Bedienungsanleitung

Napier

Napier SPORTZ COVE 61 Series Bedienungsanleitung

EuroTrail

EuroTrail ATLANTIS PRO Bedienungsanleitung

Reimo

Reimo Marina Bedienungsanleitung

TiiTENT

TiiTENT TB300 Bedienungsanleitung

Coleman

Coleman 2000033134 Installationsanleitung

Ozark Trail

Ozark Trail W784.1 Kurzanleitung

SlingFin

SlingFin CrossBow 2 Bedienungsanleitung

Coleman

Coleman 9600-141 Bedienungsanleitung

Palram

Palram Arizona 5000 Wave - WINGS Bedienungsanleitung

COVERPRO

COVERPRO 56184 Montageanleitung

Vango

Vango Zenith 100 Bedienungsanleitung

Costway

Costway PATIOJOY OP70818 Bedienungsanleitung

Clarke

Clarke PUC 88 Bedienungsanleitung

Coleman

Coleman MONTANA 14'x7' Bedienungsanleitung