Eureka Twin Tube Bedienungsanleitung

www.eurekatents.com fax: 607.779.2291

REV.C 1.07

Eureka! Frame System

Available in:

40' wide - 10', 15' & 20' mids and extensions

30' wide - 10' & 15' mids and extensions

20' wide - 10' & 20' mids and extensions

No center poles and less frame work. Twin Tube can  t in

areas where pole tents may not and has the aesthetics to

cover any event.

Featuring

www.eurekatents.com fax: 607.779.2291

REV.C 1.07

Assembly of the TWIN TUBE:

• If erecting a 40' wide, splice the 2x6 Blue to

the 2x6 Yellow before starting assembly.

See  g.1.

• Pre-assemble the legs and base plates.

See  g.2 &  g.2a.

1. Lay out parts according to schematic.

2. Build rafter section.

See  g.3

• Connect rafter tubing sections to the universal

crown(s).

• Connect longer arms of the crown to the rafter

corners -hips.

• When building rectangular tents, connect the

ridge pole to crown.

Note: It’s easier if a canopy jack holds up the

crown and rafters.

• Make sure that each pin is properly  tted.

• Attach brackets to rafters.

• Slide all corner and intermediate brackets onto

the rafter sections and pin in place.

3. Build perimeter

See  g.4.

• Starting at corner bracket, build the perimeter of

the tent.

For easy assembly we recommend:

• Steel toe shoes

• Hard helmets

• Safety gloves

• Utility aprons

• Step ladders

• Drop cloths

• Cleaning supplies

• Read instructions thoroughly.

• Make sure you have everything listed

on the parts and shipping lists as

soon as you receive the shipment.

• Use the recommended number of jacks:

20x20=2

20x30=3

20x40=3

30x30=3

30x40=4

30x60=5

40x40=3

40x60=4

40x80=5

• Pre-assemble the legs and base plates

before you start the installation.

• See Appendix A in the reference section.

 g.2

 g.1

 g.2a

Slide a base plate into a leg

Pin the base plate with

a 4" Fast Pin

Slide rafter tubing until it hits the stop-

Pin the tubing with a Silver Pin

 g.4

Slide perimeter tubing until it hits the stop-

Pin the tubing with a Silver Pin

 g.3

www.eurekatents.com fax: 607.779.2291

REV.C 1.07

Note: Install perimeter tubing at the same angle

as the roof pitch. Raising the crown will help

draw last corner together.

See  g. 5.

• Install the perimeter sections in sequence by

connecting the perimeter tubing from one bracket

to the next.

•

Permanent Cable

— If using permanent cable,

attach the loop of the longer cable around the

intermediate bracket arm before sliding the arm into

the perimeter tubing. See below.

•

Non-Permanent Cable

If using non-permanent

cable, attach with a carabiner around the arm of the

intermediate bracket. [ use longer cable ]

See below.

Frame assembly on the ground is comp lete.

4. Cable assembly- permanent

See  g. 6.

• Loop the short cable over the crown and allow it

to hang straight down.

• Connect the short vertical cable to the long

horizontal cable. Adjust turnbuckle to assure that

the cable is tight.

5. Position the top over the frame

• Pull the top [ top sections ] onto the frame.

• Lace tent sections together [ Sectional Tent see

appendix A in the reference section ].

• Align the tent top on the frame. Check the

corners, hip areas and crowns to make sure the top

is square on the frame.

• Place the web straps from the tent top through

the channels on the corner and intermediate

brackets. Feed the web through the buckle and

pull down until the buckles are positioned in the

channels.

Note: Buckle must fall into channel. Buckle

can be broken if allowed to ride on corner of

channel.

See photos below.

 g.5

Slide perimeter tubing until it hits the stop-

Pin the tubing with a Silver Pin

Loop the short cable over the crown and

allow it to hang down

Pull web until

snug and buckle

is in channel

Take web back

through buckle

Thread web around

D-ring

Correct

angle Incorrect

angle

 g.6

www.eurekatents.com fax: 607.779.2291

REV.C 1.07

6. Raise the tent

See  g.7.

• Insert base plates into the uprights. Pin in place.

• Position one canopy jack at each bracket location

along one side of the tent.

• Raise the side of the tent evenly and install

uprights.

• With uprights in place, perimeter buckles can be

attached. Do not tighten at this point. Remove the

jacks. Position them on the opposite side of the

tent. Raise the other side of the tent and install all

the remaining uprights.

• Remove the jacks.

7. Tighten tent top

See  g.8.

• Fasten buckles from tent top around the perimeter

tubing of the frame.

• Pull down on the valance with one hand and

tighten the web strap with the other hand.

• Pull down on the web straps at the tension

channel locations [ all corner and intermediate

brackets ].

8. Install corner braces

See  g.9.

Note: Braces are standard on 30' and 40' frames;

optional on 20' and smaller frames

9. Secure and stake the tent

• Attach guy ropes to each corner and intermediate

bracket. See  g.10.

Use: 2 ropes in each corner.

1 rope at each intermediate leg

• Stake the ropes out approximately 5'-6' from tent.

• Soft soil conditions may require additional stakes

and ropes.

See appendix B.

Attach the web of the canopy jack around

the arm of the bracket. Raise the tent.

Secure buckles around perimeter.

Simultaneously pull down on valance

and tighten web.

 g.7

 g.8

 g.9

 g.10

www.eurekatents.com fax: 607.779.2291

REV.C 1.07

PARTS LIST

TWIN TUBE FRAME PARTS LIST

DESCRIPTION

PRODUCT CODE

CORNER BRACKET

2450463

INTERMEDIATE BRACKET

2450466

UNIVERSAL CROWN

2450459

TT ADJ BASE PLATE W/ PIN

2450436

ROPE 5/8", 16' GUY ROPE

7119210

CARABINER

2470409

CABLE ASSEMBLY 30'

2450498

CABLE ASSEMBLY 40'

2450493

CORNER BRACES

2450437

LARGE QUICK PINS (SILVER)

2450432

FASTPIN, #CB-39R

2450494

1" FRAME PARTS FOR STD 1 AND STD. 1&2 FRAMES

4'4" BLUE 1"

2450467

5'0" ORANGE 1"

2450468

6'10" YELLOW 1"

2450469

7'8" BLACK 1"

2450470

6'8" PLAIN 1"

2450490

9'4" WHITE 1"

2450471

10'6" GREEN 1"

2450472

14'4" RED 1"

2450473

2" FRAME PARTS FOR STD. 2 AND OPTIMAL FRAMES

DESCRIPTION

PRODUCT CODE

6'8" PLAIN 2"

2450491

7'8" BLACK 2"

2450474

9'4" WHITE 2"

2450475

10'6" GREEN 2"

2450476

14'4" RED 2"

2450477

16'1" BROWN 2"

2450478

21' 10 1/2" ORANGE 2"

2450479

2"X4" FRAME PARTS FOR OPTIMAL AND

TWIN TUBE FRAMES

6'8" PLAIN 2X4

2450492

7'8" BLACK 2X4

2450480

9'4" WHITE 2X4

2450481

10'6" GREEN 2X4

2450482

14'4" RED 2X4

2450483

16'1" BROWN 2X4

2450484

19'4" BLUE 2X4

2450485

21' 8 1/2" ORANGE 2X4

2450486

2"x4" SPLICE

2450441

2"X6" FRAME PARTS FOR TWIN TUBE FRAMES

19'4" BLUE 2"X6"

2450487

10' YELLOW 2"X6"

2450488

2"X6" SPLICE FOR 29'4"

2450442

www.eurekatents.com fax: 607.779.2291

REV.C 1.07

30'

20'

40'

10'

12" 22"

20'

18'

20'

22'- 4.5"

SIDE

TOP

FRONT

TO PEAK

40' Wide x 40' Heavy Duty

www.eurekatents.com fax: 607.779.2291

REV.C 1.07

20' 20'

40'40'

22'- 4.5"

40'

10'

18'

12"

22"

20' 20'

SIDE

TOP

FRONT

40' Wide 20' Mid Heavy Duty

www.eurekatents.com fax: 607.779.2291

REV.C 1.07

10'

20'

10'

15'

22'- 4.5"

40'

20'

40'

10'

18'

12"

22"

SIDE

FRONT

TOP

22'- 4.5"

40'

10'

18'

12"

22"

SIDEFRONT

40' Wide 15' Mid & 10' Mid Heavy Duty

www.eurekatents.com fax: 607.779.2291

REV.C 1.07

Corner

Brace

Standard

Staking

2 x 6

splice

B B

4' min

= Orange

2x4

= Blue

2x6

= Blue

2x4

= Yellow

2x6

40' x 40' Heavy Duty

Note: Additional stakes will be necessary in soft soil

conditions or whenever stakes pull up from the ground.

www.eurekatents.com fax: 607.779.2291

REV.C 1.07

2 x 6

splice

Corner

Brace

B B

Standard

Staking

4' min

= Orange

2x4

= Blue

2x6

= Blue

2x4

= Yellow

2x6

40' x 60' Heavy Duty

Note: Additional stakes will be necessary in soft soil

conditions or whenever stakes pull up from the ground.

Inhaltsverzeichnis

Andere Eureka Zelt Handbücher

Eureka

Eureka Northern Breeze Bedienungsanleitung

Eureka

Eureka Tetragon 1610 Bedienungsanleitung

Eureka

Eureka N!ergy 1310 Bedienungsanleitung

Eureka

Eureka MIDORI 3 Bedienungsanleitung

Eureka

Eureka Scenic Pass 2 Scenic Pass 2 Bedienungsanleitung

Eureka

Eureka Tundern Cove 4 Bedienungsanleitung

Eureka

Eureka Entertainer Shelter Bedienungsanleitung

Eureka

Eureka Backcountry 1 Bedienungsanleitung

Eureka

Eureka Dominion Bedienungsanleitung

Eureka

Eureka Tundern Cove 6EV Bedienungsanleitung

Eureka

Eureka Grand Manan 9 Bedienungsanleitung

Eureka

Eureka Copper Canyon 1312 Bedienungsanleitung

Eureka

Eureka Lone Tree 3 Stücklistenhandbuch

Eureka

Eureka Assault Outfitter 08 Bedienungsanleitung

Eureka

Eureka Sunrise EX 4 Handbuch

Eureka

Eureka Sunrise Bedienungsanleitung

Eureka

Eureka Apex 2XT Handbuch

Eureka

Eureka N!ergy 9 Bedienungsanleitung

Eureka

Eureka N!ergy Portable Canopy Bedienungsanleitung

Eureka

Eureka 2628819 Benutzerhandbuch

Eureka

Eureka Wild Basin 4 Stücklistenhandbuch

Eureka

Eureka Alpenlite 2XT Bedienungsanleitung

Eureka

Eureka Timberline SQ XT Bedienungsanleitung

Eureka

Eureka Universal Front Family Annex Medium Bedienungsanleitung

Beliebte Zelt Handbücher anderer Marken

OZTENT

OZTENT JV SIGNATURE EDITION Bedienungsanleitung

GigaTent

GigaTent Summer Chalet Mini Tent Bedienungsanleitung

ShelterLogic

ShelterLogic 107153 Bedienungsanleitung

Outsunny

Outsunny 84C-230 Bedienungsanleitung

Napier

Napier SPORTZ COVE 61 Series Bedienungsanleitung

EuroTrail

EuroTrail ATLANTIS PRO Bedienungsanleitung

Reimo

Reimo Marina Bedienungsanleitung

TiiTENT

TiiTENT TB300 Bedienungsanleitung

Coleman

Coleman 2000033134 Installationsanleitung

Ozark Trail

Ozark Trail W784.1 Kurzanleitung

SlingFin

SlingFin CrossBow 2 Bedienungsanleitung

Coleman

Coleman 9600-141 Bedienungsanleitung

Palram

Palram Arizona 5000 Wave - WINGS Bedienungsanleitung

COVERPRO

COVERPRO 56184 Montageanleitung

Vango

Vango Zenith 100 Bedienungsanleitung

Costway

Costway PATIOJOY OP70818 Bedienungsanleitung

Clarke

Clarke PUC 88 Bedienungsanleitung

Coleman

Coleman MONTANA 14'x7' Bedienungsanleitung