Euresys Picolo.net HD1 Bedienungsanleitung

Picolo.net HD1

REFERENCE MANUAL

This documentation is provided with Picolo.net HD1 2.7.3 (doc build 3038).

www.euresys.com

This documentation is subject to the General Terms and Conditions stated on the website of EURESYS S.A. and

available on the webpage https://www.euresys.com/en/Menu-Legal/Terms-conditions. The article 10 (Limitations of

Liability and Disclaimers) and article 12 (Intellectual Property Rights) are more specifically applicable.

Picolo.net HD1 Reference Manual

Contents

PART I : THE ONVIF SERVICES 4

1. The ONVIF Device Service 5

2. The ONVIF Media Service 6

3. The ONVIF Recording Service 7

4. The ONVIF Event Service 8

5. The ONVIF PTZ Service 9

6. The ONVIF Device IO Service 10

PART II : THE PROPRIETARY SERVICES 11

1. The Proprietary Device Service 12

2. The Proprietary Media Service 13

3. The Proprietary Recording Service 14

4. The Proprietary PTZ Service 15

5. The Proprietary Device IO Service 16

PART III : THE CUSTOM SERVICES 17

1. The ERSP - Euresys Remote Serial Protocol 18

Picolo.net HD1 Reference Manual

PART I

THE ONVIF SERVICES

1. The ONVIF Device Service

See also: "The Proprietary Device Service" on page 12 |Using the Device Service

The ONVIF device service is the entry point to all other services provided by your device.

You can easily:

□List the capabilities provided by your device.

□Configure the network settings.

□Manage the system: get device info, start backup, set and get the date and the time...

□Manage the device security configuration: access policy, user credentials, certificates...

Mandatory network capabilities

□IPv4 with static IP configuration

□IPv4 with dynamic IP configuration (DHCP)

Mandatory discovery capabilities

□Target service role (WS-Discovery) on port 80

□Discoverable and non-discoverable modes

□Management of the messages "Hello", "Status changes", "Probe and Resolve" and "Bye"

□Scopes

Mandatory system capabilities

□List of supported ONVIF versions: 1.0 and 1.02

□System support information

Mandatory security capabilities

□Access security policy: "Administrator", "Operator", "User" and "Anonymous"

□Default access policy

Picolo.net HD1 Reference Manual PART I The ONVIF Services

2. The ONVIF Media Service

See also: "The Proprietary Media Service" on page 13 |Using the Media Service

The ONVIF media service provides functions to configure the streaming properties of the media

streams.

You can easily:

□Configure the ONVIF Media Profiles.

□Configure the video sources and the video encoders.

□Configure the audio sources and the audio encoders.

□Configure the metadata streams.

□Request the stream URI.

□Configure the overlays.

Mandatory codec capabilities

□JPEG video encoding - QVGA resolution

□G.711 µ-law audio encoding

□JPEG video encoding - Other than QVGA resolution

□H.264 video encoding

Mandatory streaming capabilities

□RTP / RTCP

□RTP over UDP - Unicast

□RTP interleaved in RTSP over HTTP

□RTP interleaved in RTSP over HTTPS

□RTP payloads for the formats supported by the device

□RTP metadata payload

□RTSP Port 554 as default session description using SDP

□RTSP Metadata Stream Description

Picolo.net HD1 Reference Manual PART I The ONVIF Services

3. The ONVIF Recording Service

See also: "The Proprietary Recording Service" on page 14 |Using the Recording Service

The ONVIF recording service provides function to interact with the network storage devices and

cameras with embedded storage.

You can easily:

□Configure the local media profile to record (on the attached USB media).

□Start and stop the recording job.

The WSDL filename is "recording.wsdl".

As of version 2.6, Picolo.net HD1 provides a limited implementation of the ONVIF recording

services with only one pre-existing recording job and one pre-existing recording using a local

media profile. Picolo.net HD1 does not generate events so far.

Picolo.net HD1 Reference Manual PART I The ONVIF Services

4. The ONVIF Event Service

The ONVIF event service provides functions to manage the events.

You can easily:

□Find out the notifications that a device supports and the information these notifications

contain.

□Poll the device to check for events using the Real-time Pull-Point Notification Interface.

□Be notified by the device of selected events occurrence.

Mandatory capabilities

□Basic notification interface as specified in WS-BaseNotification and WS-Topics

specifications

□Real-time Pull-Point Notification Interface

□Notification Streaming Interface

Picolo.net HD1 Reference Manual PART I The ONVIF Services

5. The ONVIF PTZ Service

See also: "The Proprietary PTZ Service" on page 15 |Using the PTZ Service

The ONVIF media service provides functions to control the NVT pan, tilt and zoom.

The WSDL filename is "ptz.wsdl".

Mandatory capabilities

●Standard commands:

□Get PTZ node properties

□Get and set PTZ configurations

□Get PTZ configurations options

□Continuous pan/tilt/zoom movements

□Stop movement

□Get status

●Standard Pelco commands:

□Zoom Wide

□Zoom Tele

□Down

□Up

□Left

□Right

●Extended Pelco commands:

□Set Preset

□Clear Preset

□Go To Preset

□Set Zoom Speed

□Recording PTZ presets

Picolo.net HD1 Reference Manual PART I The ONVIF Services

6. The ONVIF Device IO Service

See also: "The Proprietary Device IO Service" on page 16 |Using the Device IO Service

Sending Custom Commands over the Serial Port

The ONVIF device IO service provides functions to retrieve and configure the inputs and outputs

of a device.

You can easily:

□Retrieve and configure the video inputs.

□Retrieve and configure the audio inputs.

□Retrieve and configure the audio outputs.

□Retrieve and configure the relay outputs.

The WSDL filename is "deviceio.wsdl".

Mandatory capabilities

For an ONVIF 2.0 NVT device:

□Number of video sources

For relay outputs:

□DeviceIORelayOutputs

□DeviceIORelayOutputsMonostableClosed

□DeviceIORelayOutputsMonostableOpen

□DeviceIORelayOutputsMonostable

□DeviceIORelayOutputsBistableClosed

□DeviceIORelayOutputsBistableOpen

□DeviceIORelayOutputsBistable

For serial ports:

□Set/GetSerialSerialPortConfiguration

□SendReceiveSerialCommand with Timeout values ranging between 1 ms and 5 seconds.

Picolo.net HD1 automatically uses base64 encoding (binary payload) for replies captured from

the serial line when the request used base64 encoding.

Picolo.net HD1 Reference Manual PART I The ONVIF Services

Andere Handbücher für Picolo.net HD1

Inhaltsverzeichnis

Andere Euresys Computerhardware Handbücher

Euresys

Euresys Grablink Series Bedienungsanleitung

Euresys

Euresys eGrabber Bedienungsanleitung

Euresys

Euresys Coaxlink 1629 Bedienungsanleitung

Euresys

Euresys Coaxlink Duo PCIe/104-EMB Bedienungsanleitung

Euresys

Euresys Coaxlink Duo PCIe/104-EMB Bedienungsanleitung

Euresys

Euresys Coaxlink Duo PCIe/104-EMB Bedienungsanleitung

Euresys

Euresys Coaxlink Duo PCIe/104-EMB Bedienungsanleitung

Euresys

Euresys 1669-DR Picolo.net HD1 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung