Eusso UPE5600-RT Bedienungsanleitung
Power over Ethernet Repeater
UPE5600-RT User Manual
UPE5600-RT is an Ethernet and Power-over-Ethernet(POE) Repeater providing a 100/100Mbps Ethernet
transmission for 100m distance and extend Ethernet connectivity another 100m with power over Ethernet
capability. It forwards both Ethernet and PoE for another 330ft (100m) using an innovative power-processing
scheme and multiple units can be deployed in series for even longer distances, with no degradation in network
speed or latency. UPE5600-RT itself is powered by an Ethernet PoE switch (or PoE injector) and so requires
no separate power connection in the middle of the cable, making it extremely easy to connect and power IP
cameras two or three times further than previously possible without going to fiber or installing midspan power
sources.
In the simplest application, a UPE5600-RT allows an IP camera to be located 200-300 meters away from a
POE switch. The switch delivers POE power over the first 100 meters of Cat5 cable to the UPE5600-RT , and the
UPE5600-RT restores the Ethernet signal and forwards remaining POE power to the camera. The
UPE5600-RT requires no local power supply, and the UPE5600-RT presents no restriction to the camera
network connection.
Advantages:
•Extends Ethernet cable installations for another 100 meters
•Forwards Power Over Ethernet (POE) to remote devices
•No power cable installation required
•Ethernet 100Mbps Wire Speed
•Fully Ethernet protocol transparent – no restrictions to network traffic
•Compatible with IEEE 802.3af POE standard
•Simple to install – Plug & Play
PoE Repeater Specifications:
LAN Interface:
zIEEE 802.3x, Auto-Detection for 10/100BaseT and full/half duplex
zAutomatic MDIX function
POWER:
zIEEE 802.3af Compliant with voltage within 44-57Volt
zMaximum Power Dissipation: 2.5 Watts
zPOE IN: IEEE 802.3af Class 0 (Max 12.95 Watts)
zPOE OUT: IEEE 802.3af Class 1 or 2 (Max 6.49 Watts)
LED Indicators:
zPOWER: Power is ON OUT: Data Activity of LAN OUT Port
zIN: Data Activity of LAN IN Port
Operating Environment: Physical Dimension:
zHumidity: 5% to 95% non-condensing WxDxH: 120 x 90 x 28 (mm)
zTemperature: 0 ~ 50 degree C
Application Diagram:
MAXIMUM RANGE
PD device POE class 3 or 0 2 1 (None POE)
Device power up to: 12.95W 6.49W 3.84W n/a
Range with General 15.4Watt
PSE switch: n/a 300m 400m 700m
Range with Hi-Power 30Watt
PSE switch: 300m 500m 700m 1000m
Note: The distances are typical results when used with 24AWG Cat5, Cat5e or Cat6 cable.
Copyright EUSSO Technologies, Inc. All rights reserved.
Inhaltsverzeichnis
Andere Eusso Repeater Handbücher
