EvaKool IB15 Bedienungsanleitung

Caution: Read the instructions and safety warnings carefully before using the refrigerator.

DESCRIPTION

IB15 /18 are portable refrigerators that can be used with most 12-24 VDC power sources (including vehicles and

trucks).

They can be used both as a refrigerator or a freezer.

The construction consists of:-

Plastic External Cabinet

Plastic Lid

Fully Insulated Cabinet

Highly efficient Danfoss compress

Digital control panel

Power Cable.

They are also equipped with a carry strap. This means that they can be easily.

IB15/18

DC POWER CABL E 189A0470

DATA SHEET

MODEL

IB15

IB18

External dimensions (L x W x H )

565x235x360 (mm)

565x235x405 (mm)

Net weight

8.5 Kg

9.5 Kg

Power Usage

35 W

Supply voltage

DC 12-24 V

Internal Protection

Fuse 10A

Temperature Range setting

+10 to -18 °C

Cooling system

Danfoss BD Micro (Bd1.4F)

Refrigerant gas

R134a - CFC Free

Mounting kit

Optional

Insulation

CFC Free PU Foam

INSTALLATION

-Place the refrigerator on a dry, flat surface. Do not use the refrigerator in areas exposed to the

elements.

-The refrigerator requires good ventilation. Leave a space of at least 15 cm around all sides.

-Avoid placing the refrigerator near a heat source, for example, a cooker or radiator. Avoid exposing the

fridge to direct sunlight.

-Do not put liquids in the refrigerator.

-Do not place hot products in the refrigerator.

-For a fixed installation please use the mounting kit. (This is available for purchase separately –see

below)

SECURING THE REFRIGERATOR IN A VEHICLE

When using the fridge in the vehicle, you can fix it using a Mounting Kit. The mounting kit includes all relevant

straps and brackets. This is supplied separately as an option. The refrigerator is equipped with a cigarette plug,

which must be connected to the cigarette lighter outlet. In the instance where the above mentioned cable is not

used and the supply comes directly from the vehicle battery, use cables with suitable sections and lengths (see

following table) and protect the line with a 10 Amp fuse.

CABLE SECTION

MAX. LENGTH CABLE METRES

12V

24V

2.5mm (AWG 13)

2.5M (8 FT)

5M (16FT)

4 mm (AWG 11)

4M (13 FT)

8M (26 FT)

6 mm (AWG 9)

6M (20 FT)

12M (40 FT)

CONTROL PANEL DESCRIPTION

1. ON / OFF Button

2. SET Battery protection Button

3. LCD Display

4. Temperature decrease or scroll menu button

5. 5 Temperature increase or scroll menu button

To increase the temperature of the cooling compartment press key 5 until the desired value appears on

the display.

To decrease the temperature of the cooling compartment, press key 4 until the desired value appears

on the display.

The refrigerator includes a settings menu, from where it is possible to modify values and thresholds

set by the manufacturer, more specifically:

1. (OFS) OFF-SET value

2. (F-C) Fahrenheit or Centigrade settings

To access the menu, press, with the refrigerator powered but off, keys 2-4-5 at the same time for a

few seconds.

To scroll through the various functions within the menu, use keys 4 and 5, to change the

parameters of the selected function, press key 2, the value will begin to flash, set the desired value,

again using keys 4 and 5. The new value will be saved after it stops flashing.

If no keys are pressed for a period of time, you will automatically exit the menu mode.

BATTERY PROTECTION LEVEL

It is possible to set three different battery protection threshold levels: (The recommended setting

is MIN)

OFF-SET VALUE

The OFF-SET value refers to the difference between the temperature inside the cooling compartment and

the temperature set and presented on the display.

It is possible to set three different OFF-SET levels dependent on the temperature set on the display. The

recommended OFF-SET value is 2°C, in order to achieve a temperature within the cooling compartment

which corresponds with the temperature presented on the display.

Note: we do not recommend modifying the preset OFF-SET values.

With temperatures greater than -6°C, set the value

to OF1 which will provide a maximum difference of

2°C between the compartment temperature and the

temperature on the display

With temperatures between -7°C and -12°C, set the

value to OF2 which will provide a maximum difference

of 4°C between the compartment temperature and the

temperature on the display

With temperatures inferior to -13°C, set the value

to OF3 which will provide a maximum difference of

4°C between the compartment temperature and the

temperature on the display

To set the temperature unit of measurement to degrees

Fahrenheit or Centigrade, activate symbols F or C

FAULTS

Any operation faults will be displayed after 90 seconds and will be presented on the display with the following

codes:

Insufficient voltage (Voltage below cut-out value) :

The fan is using more than 0.6A:

The compressor rotor is blocked:

The compressor is not able to operate at the minimum number of

revolutions/rpm: (1850 rpm)

The temperature in the compressor bay is too high :

The thermostat has short-circuited or is not correctly connected to the control

unit:

REPLENISHMENT

Avoid placing hot food in the refrigerator. Place the products so that they do not knock against each other or

break when the vehicle is in motion.

Ensure the lid is always firmly closed and reduce the time it is left open.

MAINTENANCE

Caution Before carrying out any maintenance operations on the refrigerator, disconnect the power cable

from the plug.

CLEANING

Regularly clean the inside of the refrigerator using baking soda dissolved in warm water. Do not, in any case, use

abrasive products, detergents or soaps; after washing, rinse with clean water and carefully dry. When the

refrigerator is not being used, thoroughly clean and dry the inside in order to avoid the formation of mould or foul

odors.

HELPFUL ADVICE

Where the refrigerator does not function or functions incorrectly, before contacting one of our technical assistance

centres ensure that:-

a) There is a power supply.

b) The voltage complies with that indicated on the plate.

c) The connections and poles are correct.

d) The ventilation grids are not obstructed.

e) The fridge unit is not placed near to a heat source.

f) The power supply fuse is not interrupted.

Evakool will not assume any responsibility in the instance where the instructions in this manual were not followed.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere EvaKool Kühlschrank Handbücher

EvaKool

EvaKool DC175 Bedienungsanleitung

EvaKool

EvaKool TRAVELMATE Bedienungsanleitung

EvaKool

EvaKool PLATINUM UPRIGHT DC95 Bedienungsanleitung

EvaKool

EvaKool TMX35 Bedienungsanleitung

EvaKool

EvaKool Adventure Kings Bedienungsanleitung

EvaKool

EvaKool RF Bedienungsanleitung

EvaKool

EvaKool BCD106 Bedienungsanleitung

EvaKool

EvaKool IB70 Bedienungsanleitung

EvaKool

EvaKool Indel B 31 Bedienungsanleitung

EvaKool

EvaKool PLATINUM DC95-SG Bedienungsanleitung

EvaKool

EvaKool KM55 Bedienungsanleitung

EvaKool

EvaKool RIDGE RYDER Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung