Evco EVJ 700 Gebrauchsanweisung

144EVJ700E204 EVCO | 29.01.2021 | 1

EVJ 700

EVJ 700EVJ 700

EVJ 700

Application Manual:

Controller for horizontal coo ing

modules

4 coo ing combinations (depending on the application):

power or temperature + timer or needle probe

ON-OFF or PI temperature control

| Models for managing external SSRs

Push encoder and/or 6 capacitive

touch eys

| 2.8” LCD colour graphic display

IP65 front protection

2 installation methods on front panel: built-in

or concealed under the panel

(if made of glass or methacrylate) with customizable

eys on the panel surface

EVJ 700

EVJ 700 EVJ 700

EVJ 700 -

Application Manual:

144EVJ700E204 EVCO | 29.01.2021 | 2

USE

USEUSE

USE

Device used for indoor applications.

IMPORTANT

IMPORTANTIMPORTANT

IMPORTANT

Read this document carefully before installation and ta e all precautions before using the device.

Only use the device in the ways described in this document.

CONSIDER THE ENVIRONMENT

CONSIDER THE ENVIRONMENTCONSIDER THE ENVIRONMENT

CONSIDER THE ENVIRONMENT

Keep this document with the device for future reference. Please do not print out again.

DISPOSAL

DISPOSALDISPOSAL

DISPOSAL

The device must be disposed of according to local regulations governing the collection of electrical and electronic

equipment.

EVJ 700

EVJ 700 EVJ 700

EVJ 700 -

Application Manual:

144EVJ700E204 EVCO | 29.01.2021 | 3

Index

IndexIndex

Index

Introduct on

Introduct onIntroduct on

Introduct on

Ma n features and purchas ng codes

Ma n features and purchas ng codesMa n features and purchas ng codes

Ma n features and purchas ng codes

Measurements and nstallat on (mm)

Measurements and nstallat on (mm)Measurements and nstallat on (mm)

Measurements and nstallat on (mm)

Electr cal connect ons

Electr cal connect onsElectr cal connect ons

Electr cal connect ons

Nav gat on

Nav gat onNav gat on

Nav gat on

|Introduction 12

|Keypad 12

|Push encoder 12

|Changing values 13

|Power failure 13

|Communication 13

|Basic functions 14

|Fans 14

|Heating 14

|Activating the buzzer when the setpoint is reached 14

Ma n menu

Ma n menuMa n menu

Ma n menu

|Configuration screen 15

|Setting password 15

|Available menus 16

|Configuration 16

|Service 16

|Language 16

|Internal values 16

|Restoring parameters 15

Conf gu

Conf guConf gu

Conf gur ng nputs/outputs for the d fferent appl cat ons

r ng nputs/outputs for the d fferent appl cat onsr ng nputs/outputs for the d fferent appl cat ons

r ng nputs/outputs for the d fferent appl cat ons

Conf gurable appl cat ons

Conf gurable appl cat onsConf gurable appl cat ons

Conf gurable appl cat ons

|Electric hot plates 19

|Ovens 21

|Tilting pans 24

EVJ 700

EVJ 700 EVJ 700

EVJ 700 -

Application Manual:

144EVJ700E204 EVCO | 29.01.2021 | 4

Boiling pans

|Fry-tops 30

|Grills 33

|Fryers 35

|Pasta coo ers 38

|Bain-marie 40

L st of alarms

L st of alarmsL st of alarms

L st of alarms

|Table of alarms 42

Parameters

ParametersParameters

Parameters

|Managing parameters 43

|Ma ing changes using the EVJKEY 43

|Table of parameters 44

Techn cal spec f cat ons

Techn cal spec f cat onsTechn cal spec f cat ons

Techn cal spec f cat ons

EVJ 700

EVJ 700 EVJ 700

EVJ 700 -

Application Manual:

144EVJ700E204 EVCO | 29.01.2021 | 5

Introduct on

Introduct onIntroduct on

Introduct on

The EVJ 700

EVJ 700 EVJ 700

EVJ 700

compact controller

is a modern alternative to

electro-mechanical devices for managing horizontal cooking

modules in professional kitchens. It offers maximum

configurability as it can be used with nine different applications:

electric hot plates, ovens, tilting pans, boiling pans, fry-tops,

fryers, pasta cookers, bain-marie and grills.

Depending on the application, cooking can be controlled by power or

temperature, combined with a timer or needle probe as re uired.

Temperature can be ON-OFF or PI controlled for greater regulation

precision.

The smart 2.8 inch LCD graphic display with 6 capacitive touch

keys and/or a push encoder provides constant information about

the processes in progress, as well as making it easy to set the

cooking cycle.

E uipped with IP65 front protection, the controller can be fitted to

the panel in the conventional way, built into the front, or concealed

under the panel (if made of glass or methacrylate), ensuring high

cleaning and hygiene standards.

EVJ 700

EVJ 700 EVJ 700

EVJ 700 -

Application Manual:

144EVJ700E204 EVCO | 29.01.2021 | 6

Ma n features and purchas ng codes

Ma n features and purchas ng codesMa n features and purchas ng codes

Ma n features and purchas ng codes

The table below shows the main features and their purchasing codes

Features

FeaturesFeatures

Features

EVJ705J9

EVJ705J9EVJ705J9

EVJ705J9

EVJ705Z9

EVJ705Z9EVJ705Z9

EVJ705Z9

EVJ725J9

EVJ725J9EVJ725J9

EVJ725J9

EVJ705J9VG

EVJ705J9VGEVJ705J9VG

EVJ705J9VG

Power supply

Power supplyPower supply

Power supply

115... 230 VAC • • • •

Installa

InstallaInstalla

Installat on

t ont on

t on

Recessed in the panel

•

Concealed under the panel (if made of glass or

metacrylate)

•

Analogue nputs

Analogue nputsAnalogue nputs

Analogue nputs

Regulation probe (Pt 1000 2 wires) •

Regulation probe (J/K/Pt 100 2 wires) • • •

Needle probe (Pt 1000 2 wires) •

Needle probe (J/K/Pt 100 2 wires) • • •

D g tal nputs

D g tal nputsD g tal nputs

D g tal nputs

Multi-purpose 1 • • • •

Multi-purpose 2 • • • •

D g tal outputs (electro

D g tal outputs (electroD g tal outputs (electro

D g tal outputs (electro-

-mechan cal relays, A res.

mechan cal relays, A res. mechan cal relays, A res.

mechan cal relays, A res.

at 250 VAC)

at 250 VAC)at 250 VAC)

at 250 VAC)

Load 1 (configurable) 16 A 16 A 16 A 16 A

Load 2 (configurable) 5 A 8 A 5 A

Load 4 (configurable) 8 A 8 A 8 A 8 A

Load 5 (configurable) 8 A 5 A 8 A 8 A

Load 6 (configurable) 5 A 5 A 5 A

D g tal outputs

D g tal outputs D g tal outputs

D g tal outputs (command for sol d state relays; 12

(command for sol d state relays; 12 (command for sol d state relays; 12

(command for sol d state relays; 12

VDC, 15 mA max)

VDC, 15 mA max)VDC, 15 mA max)

VDC, 15 mA max)

Load 2 (configurable) •

Load 6 (configurable •

User nterface

User nterfaceUser nterface

User nterface

2.8 inch graphic display • • • •

Commun cat ons ports

Commun cat ons portsCommun cat ons ports

Commun cat ons ports

TTL MODBUS • • • •

For encoder • • • •

Further features

Further featuresFurther features

Further features

Alarm buzzer • • • •

ON-OFF/PI control • • • •

For more information see the section “Technical specifications”.

EVJ 700

EVJ 700 EVJ 700

EVJ 700 -

Application Manual:

144EVJ700E204 EVCO | 29.01.2021 | 7

Measurements and nstallat on

Measurements and nstallat onMeasurements and nstallat on

Measurements and nstallat on

(mm)

(mm)(mm)

(mm)

Models for bu lt- n nstallat on.

Front installation on a plastic or metal panel (with elastic holding flaps).

N.B.

The metal panel must be between 0.8 and 1.5 mm (1/32 and 1/16 in) thick, while the plastic panel must be between 0.8 and 3.4 mm (1/32 and

1/8 in).

INSTALLATION PRECAUTIONS

INSTALLATION PRECAUTIONSINSTALLATION PRECAUTIONS

INSTALLATION PRECAUTIONS

–Ensure that the wor ing conditions are within the limits stated in the “Technical specifications” section.

–Do not install the device close to heat sources, equipment with a strong magnetic field, in places subject to direct

sunlight, rain, damp, excessive dust, mechanical vibrations or shoc s.

–In compliance with safety regulations, the device must be installed properly to ensure adequate protection from

contact with electrical parts. All protective parts must be fixed in such a way as to need the aid of a tool to remove

them.

EVJ 700

EVJ 700 EVJ 700

EVJ 700 -

Application Manual:

144EVJ700E204 EVCO | 29.01.2021 | 8

Models for concealed nstallat on under the panel

Installation from behind on a glass or methacrylate panel (with double-sided adhesive tape) personalising the keys on the front of the unit.

N.B.

- the maximum thickness of a glass panel must be 4.0 mm (3/16 in), while that for a methacrylate panel must be 2.0 mm (1/16)

- the panel and the material used to carry out screen printing must not contain conductive substances

- keep the device and the panel at a temperature of between 15 and 38°C (59 and 100°F) for about an hour before carrying out the installation

- before installation, carefully clean the panel surface that will be in contact with the double-sided adhesive tape, making sure that the

product used for cleaning is suitable for the panel material (we recommend using isopropyl alcohol, in the case of surfaces greased with a

hydrocarbon solvent). Continue cleaning with a cloth until it is clean and dry after use

- during installation, apply uniform and constant pressure for about 30 seconds on the panel surface in contact with the double-sided

adhesive tape. Then leave the device and the panel in a horizontal position for about 48 hours at a temperature of between 15 and 38°C (59

and 100°F).

EVJ 700

EVJ 700 EVJ 700

EVJ 700 -

Application Manual:

144EVJ700E204 EVCO | 29.01.2021 | 9

Electr cal connect ons

Electr cal connect onsElectr cal connect ons

Electr cal connect ons

Electr cal connect on model EVJ705Z9

PRECAUTIONS FOR ELECTRICAL CONNECTIONS

PRECAUTIONS FOR ELECTRICAL CONNECTIONSPRECAUTIONS FOR ELECTRICAL CONNECTIONS

PRECAUTIONS FOR ELECTRICAL CONNECTIONS

–Use cables of an adequate section for the current running through them

–To reduce any electromagnetic interference, locate the power cables as far away as possible from the signal cables

–If using an electrical or pneumatic screwdriver, adjust the tightening torque

–If the device is moved from a cold to a warm place, humidity may cause condensation to form inside; wait for about

an hour before switching on the power

–Ma e sure that the supply voltage, electrical frequency and power are within the set limits

–Disconnect the power supply before carrying out any type of maintenance

–Do not use the device as a safety device

–For repairs and further information, contact the EVCO sales networ ; returned goods without the data label will

not be accepted

EVJ 700

EVJ 700 EVJ 700

EVJ 700 -

Application Manual:

144EVJ700E204 EVCO | 29.01.2021 | 10

Electr cal connect on model EVJ705J9 and EVJ705J9VG

Andere Handbücher für EVJ 700

Inhaltsverzeichnis

Andere Evco Controller Handbücher

Evco

Evco EVD MVC Series Bedienungsanleitung

Evco

Evco c-pro 3 micro AHU Gebrauchsanweisung

Evco

Evco c-pro 3 micro AHU Bedienungsanleitung

Evco

Evco EVK204 Bedienungsanleitung

Evco

Evco EV3802 Bedienungsanleitung

Evco

Evco EVX225 Bedienungsanleitung

Evco

Evco EV3 CHIL Bedienungsanleitung

Evco

Evco EVBOX Light JS200 Bedienungsanleitung

Evco

Evco c-pro 3 micro CHIL Series Gebrauchsanweisung

Evco

Evco EVF214 Bedienungsanleitung

Evco

Evco C-PRO MEGA Gebrauchsanweisung

Evco

Evco Vcolor 869 Benutzerhandbuch

Evco

Evco EV3 Basic Split Bedienungsanleitung

Evco

Evco EVRS 200 Series Bedienungsanleitung

Evco

Evco EV9376 Bedienungsanleitung

Evco

Evco EVF 300 Series Benutzerhandbuch

Evco

Evco c-pro 3 OEM Bedienungsanleitung

Evco

Evco EVF204 Bedienungsanleitung

Evco

Evco EVD EXP Bedienungsanleitung

Evco

Evco EVXS214 Bedienungsanleitung

Evco

Evco C-PRO NANO Bedienungsanleitung

Evco

Evco EV9300 Series Bedienungsanleitung

Evco

Evco EV3221 Bedienungsanleitung

Evco

Evco EV3 700 Series Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch