Evertz QMC-DCP-RP Bedienungsanleitung

Installation Guide for the QMC-DCP-RP

Revision 1.0

TABLE OF CONTENTS

1. SETUP FOR INSTALLATION OF QMC-DCP ADJUSTABLE RACK MOUNTS................1

1.1. GETTING STARTED................................................................................................................1

2. REMOVING PROTECTIVE COVERS.................................................................................2

3. INSTALLING THE ADJUSTABLE MOUNTS.....................................................................4

3.1. STEP 1: INSTALLING THE TOP GUIDES TO THE RIGHT AND LEFT SIDE........................ 4

3.2. STEP 2: INSTALLING THE BOTTOM GUIDES...................................................................... 6

3.3. STEP 3: COMPLETING THE ASSEMBLY..............................................................................8

Tables

Table 1-1: Parts List.............................................................................................................................1

Figures

Figure 1-1: Parts in the QMC-DCP-RP Accessory Kit ......................................................................... 1

Figure 2-1: Protective Cover on QMC-DCP.........................................................................................2

Figure 2-2: Remove the Protective Covering from the Right Side.......................................................2

Figure 2-3: Remove the Protective Covering from the Left Side.......................................................... 3

Figure 2-4: Protective Cover removed from the QMC-DCP.................................................................3

Figure 3-1: Attaching the Top Guide Rotation Lock – Right Side ........................................................4

Figure 3-2: Securing the Top Guide Rotation Lock – Right Side.........................................................5

Figure 3-3: Attaching the Top Guide Rotation Lock – Left Side........................................................... 5

Figure 3-4: Securing the Top Guide Rotation Lock – Right Side.........................................................6

Figure 3-5: Bottom Guide with mounting holes....................................................................................7

Figure 3-6: Bottom Guide position in respect to Top Guide (not installed) ..........................................7

Figure 3-7: Bottom Guide position in respect to Top Guide (installed) ................................................8

Figure 3-8: Adjusting and securing the angle.......................................................................................8

Installation Guide for the QMC-DCP-RP

Revision 1.0

REVISION HISTORY

REVISION DESCRIPTION DATE

1.0 First Release Jul 07

Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor

for the rights of third parties, which may be effected in any way by the use thereof. Any representations in this document concerning

performance of Evertz products are for informational use only and are not warranties of future performance, either express or implied. The

only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order

confirmation form.

Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no

warranty is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or

order confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If

you encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make

changes in equipment design or specifications.

Installation Guide for the QMC-DCP-RP

Revision 1.0 Page 1

1. SETUP FOR INSTALLATION OF QMC-DCP ADJUSTABLE RACK MOUNTS

The QMC-DCP-RP is an accessory kit for the QMC Desktop Control Panel (QMC-DCP). The QMC-

DCP-RP accessory kit allows the user to adjust the angle of the QMC-DCP when it is installed in a desk

or rack.

1.1. GETTING STARTED

The QMC-DCP-RP accessory kit comes with the following pieces of equipment:

Part Description Evertz Part # Quantity

A QMC DCP Top Guide Rotation Lock - Right Side QMC-DCP-MC-8 1

B QMC DCP Top Guide Rotation Lock - Left Side EQMC-DCP-MC-9 1

C QMC DCP Bottom Guide Rotation EQMC-DCP-MC-7 2

D 3 x 25mm Pan Head Screw HMMM3X25PANZC 8

E M5 Lockwasher HWASHER-M5LOCK 2

F 5 x 10mm Pan Head Screw HM5X10MM-PANPHIL 2

Table 1-1: Parts List

Figure 1-1: Parts in the QMC-DCP-RP Accessory Kit

"If items are missing from the QMC-DCP-RP accessory kit, please contact Evertz

Service department at 1-905-335-7570 or [email protected].

Installation Guide for the QMC-DCP-RP

Page 2 Revision 1.0

2. REMOVING PROTECTIVE COVERS

The QMC-DCP is shipped with protective covering on the mounting braces. These covers can be

removed by unscrewing the screws, as shown in Figure 2-1. This step is repeated for both the right

and left side of the QMC-DCP. (See Figure 2-2 and Figure 2-3)

Figure 2-1: Protective Cover on QMC-DCP

Figure 2-2: Remove the Protective Covering from the Right Side

Installation Guide for the QMC-DCP-RP

Revision 1.0 Page 3

Figure 2-3: Remove the Protective Covering from the Left Side

Figure 2-4 shows the QMC-DCP with both protective covers removed.

Figure 2-4: Protective Cover removed from the QMC-DCP

Installation Guide for the QMC-DCP-RP

Page 4 Revision 1.0

3. INSTALLING THE ADJUSTABLE MOUNTS

The QMC-DCP-RP accessory kit has two major parts: The Top Guides (right and left) and the Bottom

Guides. The right and left Top Guides are fastened on the QMC-DCP panel itself and the Bottom

Guides are fastened to the mounting 19” wide rack on the desk or in the equipment room.

3.1. STEP 1: INSTALLING THE TOP GUIDES TO THE RIGHT AND LEFT SIDE

Place Top Guide Rotation Lock – Right Side (PART A) onto the mounting bracket on the right side of

the QMC-DCP. (See Figure 3-1)

Figure 3-1: Attaching the Top Guide Rotation Lock – Right Side

Using four 3x25mm Pan Screws (Part D), secure the Top Guide Rotation Lock to the QMC-DCP as

shown in Figure 3-2.

Installation Guide for the QMC-DCP-RP

Revision 1.0 Page 5

Figure 3-2: Securing the Top Guide Rotation Lock – Right Side

Repeat the process for attaching the Top Guide Rotation Lock – Left Side to the mounting bracket on

the left side of the QMC-DCP panel, as shown in Figure 3-3 and Figure 3-4.

Figure 3-3: Attaching the Top Guide Rotation Lock – Left Side

Installation Guide for the QMC-DCP-RP

Page 6 Revision 1.0

Figure 3-4: Securing the Top Guide Rotation Lock – Right Side

3.2. STEP 2: INSTALLING THE BOTTOM GUIDES

The Bottom Guides (Part C – see Figure 3-5) are fastened to the rack or desktop rack that the QMC-

DCP is being fitted in. There are two Bottom Guides provided in the QMC-DCP-RP. These parts are

bi-directional, therefore, no right or left designation is required. The Bottom Guides are fastened to the

rack through the mounting holes shown in Figure 3-5.

The screws used to fasten the Bottom Guides to the rack or desktop rack ARE NOT

INCLUDED in the QMC-DCP-RP Accessory kit. The user MUST provide this

hardware.

Installation Guide for the QMC-DCP-RP

Revision 1.0 Page 7

Figure 3-5: Bottom Guide with mounting holes

When installing the Bottom Guide to the rack, the user should be aware that the Bottom Guide attaches

to the Top Guide with Rotation Lock, as shown in Figure 3-6 and Figure 3-7. Therefore, care MUST be

taken when centering the Bottom Guide in the rack. This step is repeated for both the right and left side

of the rack or desktop rack.

Figure 3-6: Bottom Guide position in respect to Top Guide (not installed)

Installation Guide for the QMC-DCP-RP

Page 8 Revision 1.0

Figure 3-7: Bottom Guide position in respect to Top Guide (installed)

3.3. STEP 3: COMPLETING THE ASSEMBLY

For the final step of the assembly, the user can adjust the angle of the panel using the pin connector

shown in Figure 3-8. Once the desired angle is achieved, the user fixes this angle by tightening the

Lock Screw (Part E), shown in Figure 3-8.

Figure 3-8: Adjusting and securing the angle

Inhaltsverzeichnis

Andere evertz Computerhardware Handbücher

evertz

evertz HDSD9545DLY-PRO Bedienungsanleitung

evertz

evertz S7720AD-A4-LTC Bedienungsanleitung

evertz

evertz 7800EMR-HYDRA2 Bedienungsanleitung

evertz

evertz 5010 Bedienungsanleitung

evertz

evertz 3067VIP-3G-36x4 Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 7707VAR-HD Bedienungsanleitung

evertz

evertz EMX Series Bedienungsanleitung

evertz

evertz 7700 MultiFrame Bedienungsanleitung

evertz

evertz 570ACO-X19-10G Series Bedienungsanleitung

evertz

evertz 7800EMR-ALINK2 Bedienungsanleitung

evertz

evertz QMCsetup Bedienungsanleitung

evertz

evertz 570DSK-12G-F Bedienungsanleitung

evertz

evertz 2400PSUA-8 Bedienungsanleitung

evertz

evertz 9540 Bedienungsanleitung

evertz

evertz 7700 MultiFrame Bedienungsanleitung

evertz

evertz 570ASI-X19-10GE2 Bedienungsanleitung

evertz

evertz 3067VIP10G Series Bedienungsanleitung

evertz

evertz 7780M4-ASI Bedienungsanleitung

evertz

evertz 7825DSK2-LG-HD Bedienungsanleitung

evertz

evertz 570DSK-25G Series Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 3067VIP10G-3G-HW Bedienungsanleitung

evertz

evertz X0400 Series Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung

evertz QMC-DCP-RP Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken