EVGA 111-CD-E630 Bedienungsanleitung

User’s Guide

EVGA H55V Motherboard

Table of Contents

Congratulations.....................................................................................................3

Parts NOT in the Kit...........................................................................................3

Hardware Installation ............................................................................................4

Preparing the Motherboard ................................................................................4

Installing the CPU ..........................................................................................4

Installing the CPU Fan....................................................................................5

Installing System Memory (DIMMs) ................................................................5

Installing the Motherboard.................................................................................5

Installing the I/O Shield .................................................................................6

Securing the Motherboard into a System Case.................................................6

Connecting Cables.............................................................................................6

24-pin ATX Power (ATXPOWER)..................................................................7

4-pin ATX 12V Power (ATX_CPU) ................................................................7

Connecting Serial ATA Cables .....................................................................7

Front Panel Header (F_PANEL) ...................................................................8

Expansion Slots ..........................................................................................8

Enter BIOS Setup..................................................................................................9

Verify/Change BIOS settings ..............................................................................9

Installing Drivers and Software ............................................................................10

Windows XP/Vista/7 Driver Installation .............................................................10

Congratulations!

Thank you for purchasing this EVGA H55 Chipset based motherboard.

This motherboard from EVGA offers high performance, quality features and superior support. If you have

any questions about this product please visit www.evga.com to read the EVGA FAQ, visit our forums or

Parts NOT in the Kit

This kit contains all the hardware necessary to install and connect your new EVGA H55

Motherboard. However, it does not contain the following items that must be purchased

separately to make the motherboard functional.

Intel Socket 1156 Processor

DDR3 System Memory

Socket 1156 Cooling fan

Power Supply

EVGA assumes you have purchased all the necessary parts needed to allow for proper system

functionality. For a full list of supported CPU’s on this motherboard, please visit

http://www.evga.com/support/motherboard/.

When replacing a motherboard in a system case, you will need to reinstall an operating system

even though the current hard disk may already have an operating system

Hardware Installation

This section will guide you through the installation of the motherboard.

The topics covered in this section are:

Preparing the motherboard

Installing the motherboard

Connecting cables

Preparing the Motherboard

Installing the CPU

Be very careful when handling the CPU. Hold the processor only by

the edges and do not touch the contacts on the motherboard or CPU.

Any physical damage to the motherboard pins will void the

warranty.

Use the following procedure to install the CPU onto the motherboard:

1. Unhook the socket lever by pushing

down

and

away

from the socket.

2. Pull the socket lever back and the load plate will automatically lift.

There is a protective socket cover within the CPU socket to protect

the socket when there is no CPU installed.

3. Remove the protective socket cover from the CPU Socket in a straight

up motion.

Note: You mustsave the protective cover so that whenever you

remove the CPU the pins will not be protected.

4. Align the notches in the processor with the notches on the socket.

5. Lower the processor straight down into the socket without tilting or

sliding it into the socket

6. Lower the load plate so it is resting on the CPU.

7. Pull back the socket lever again to ensure the load plate tip engages

under the shoulder screw cap.

8. Carefully close and latch the lever.

Align notches with notches

on the CPU

Installing the CPU Fan

There are many different fan types that can be used with this

motherboard. Follow the instruction that came with you fan

assembly. Be sure that the fan orientation is correct for your

chassis type and your fan assembly.

Installing System Memory (DIMMs)

Your new motherboard has four 240-pin slots for DDR3 memory. These slots support 256 MB,

512 MB, 1GB, 2GB, and 4GB DDR3 technologies. There must be at least one memory bank

populated to ensure normal operation. Use the following the recommendations for installing

memory.

One DIMM: If using 1 DIMM (Single Channel), install into: DIMM slot 1.

Two DIMMs: If using 2 DIMMs (Dual Channel), install into: DIMM slots 1 and 3.

Four DIMMS: If using 4 DIMMs (Dual Channel), install into: DIMM slots 2, 1, 4, and 3.

Use the following procedure to install memory DIMMs. Note that there is only one gap near the

center of the DIMM slot. This slot matches the slot on the memory DIMM to ensure the

component is installed properly.

1. Unlock a DIMM slot by pressing the module clips outward.

2. Align the memory module to the DIMM slot, and insert the module vertically into the DIMM

slot. The plastic clips at both sides of the DIMM slot automatically lock the DIMM into the

connector.

Installing the Motherboard

The sequence of installing the motherboard into a system case depends on the chassis you are

using and if you are replacing an existing motherboard or working with an empty system case.

Determine if it would be easier to make all the connections prior to this step or to secure the

motherboard and then make all the connections. It is normally easier to secure the motherboard

first.

DIMM Slot 2 (XMM2)

DIMM Slot 1 (XMM1)

DIMM Slot 4 (XMM4)

DIMM Slot 3 (XMM3)

Use the following procedure to install the I/O shield and secure the motherboard into the

chassis.

Installing the I/O Shield

The motherboard kit comes with an I/O shield that is used to block radio frequency

transmissions, protects internal components from dust and foreign objects, and promotes

correct airflow within the chassis.

Before installing the motherboard, install the I/O shield from the

inside

of the chassis. Press the

I/O shield into place and make sure it fits securely.

Securing the Motherboard into a System Case

Most system cases have a base with mounting studs or spacers to allow the motherboard to be

secured to the chassis and help to prevent short circuits. If there are studs that do not align

with a mounting hole on the motherboard, it is recommended that you remove that stud to

prevent the possibility of a short circuit.

1. Carefully place the motherboard onto the stand offs located inside the chassis.

2. Align the mounting holes with the stand offs.

3. Align the connectors to the I/O shield.

4. Ensure that the fan assembly is aligned with the chassis vents according to the fan

assembly instruction.

5. Secure the motherboard with screws.

Connecting Cables

This section takes you through all the necessary connections on the motherboard. This will

include:

Power Connections

24-pin ATX power (ATXPOWER)

4-pin ATX 12V power (ATX_CPU)

Serial ATA II

Internal Headers

Front panel

Expansion slots

24-pin ATX Power (ATXPOWER)

ATXPOWER is the main power supply connector located along the edge of the board next to

the DIMM slots. Make sure that the power supply cable and pins are properly aligned with the

connector on the motherboard. Firmly plug the power supply cable into the connector and make

sure it is secure.

Connector

Signal

+3.3V

-12V

GND

+5V

PS_ON

GND

+5V

GND

PWROK

RSVD

+5V_AUX

+5V

+12V

+5V

+12V

+5V

+3.3V

GND

4-pin ATX 12V Power (ATX_CPU)

ATX_CPU the 4-pin ATX 12V power connection, is used to provide power to the CPU. Align the

pins to the connector and press firmly until seated.

Connecting Serial ATA Cables

The Serial ATA II connector is used to connect the Serial ATA II device to the motherboard.

These connectors support the thin Serial ATA II cables for primary storage devices. The current

Serial ATA II interface allows up to 300MB/s data transfer rate.

Power Connector

Plug power cable from system

power supply to ATXPOWER

Front Panel Header (F_PANEL)

The front panel header on this motherboard is one connector used to connect the following four

cables.

PLED

Attach the front panel power LED

cable to these two pins of the connector. The Power LED indicates

the system’s status.

When the system is turned on, the LED is on. When the system is

turned off, the LED is off.

PWRBTN

Attach the power button cable from the case to these two pins.

Pressing the power button on the front panel turns the system on and

off rather than using the onboard button.

HDLED

Attach the hard disk drive indicator LED cable to these two pins. The

HDD indicator LED indicates the activity status of the hard disks.

RESET

Attach the Reset switch cable from the front panel of the case to

these two pins. The system restarts when

the RESET switch is pressed.

Expansion Slots

PCI Slots

The PCI slot supports many expansion cards such as a LAN card, USB card, SCSI card and

other cards that comply with PCI specifications. When installing a card into the PCI slot, be

sure that it is fully seated. Secure the card’s metal bracket to the chassis back panel with the

screw used to hold the blank cover.

PCI Express x1 Slots

The PCI Express x1 slot is designed to accommodate PCIe x1 cards, such as an EVGA Killer

Xeno Network Card or Sound Card. The x1 slot provides 250 MB/sec bandwidth.

PCI Express x4 Slots

The PCI Express x4 slot is designed to accommodate PCIe x1/x4 cards.

PCI Express x16/x8/x1 Slots

These PCI Express slots are reserved for Graphic Cards and PCI Express x1 devices. The

design of this motherboard supports multiple Graphic Card technology.

When installing a PCI Express Graphic Card, be sure the retention clip snaps and locks the

card into place. Secure the card’s metal bracket to the chassis back panel with the screw used

to hold the blank cover.

Enter BIOS Setup

The BIOS is the communication bridge between hardware and software. Correctly setting the BIOS

parameters is critical to maintain optimal system performance and stability.

Verify/Change BIOS settings

Use the following procedure to verify/change BIOS settings.

1. Power on the computer.

2. Press the Del key when the following message briefly displays at the bottom of the screen

during the Power On Self Test (POST).

Press F2 to Load Defaults, DEL to enter Setup.

Pressing Del takes you to the AMI BIOS CMOS Setup Utility.

The main menu allows you to select from the list of setup functions and two exit choices. Use

the + and -keys to scroll through the options or press Enter to display the associated submenu.

Use the  arrow keys to position the selector in the option you choose. To go back to the

previous menu, press Esc.

Use [ENTER], [TAB]

Or [SHITF-TAB] to

Select a field.

Use [+] or [-] to

Configure system Time.

System Overview

AMIBIOS

Version : 0307

Build Date : 10/20/09

System Memory

Size : 4096MB

System Time [10:19:32]

System Date [Mon 10/26/2009]

BIOS SETUP UTILITY

Main Advanced Power Security Boot Exit

 Select Screen

 Select Item

+- Change Field

Tab Select Field

F1 General Help

F10 Save and Exit

ESC Exit

Main

Installing Drivers and Software

The CD that has been shipped with the EVGA H55 Motherboard contains the following software and

drivers:

Chipset Drivers

Audio drivers

LAN Drivers

Intel(R) Management Engine Interface Driver

Adobe Acrobat Reader

User’s Manual

Windows XP/Vista/7 Driver Installation

1. Insert the Intel H55 installation CD for the motherboard included in the kit.

2. The CD will autorun, install the drivers and utilities listed on the install screen. If the CD

does not run, go to My Computer and click on the CD to open.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere EVGA Hauptplatine Handbücher

EVGA

EVGA X58 FTW3 Bedienungsanleitung

EVGA

EVGA 113-M2-E113-TR Bedienungsanleitung

EVGA

EVGA X79 FTW Bedienungsanleitung

EVGA

EVGA Z97 Bedienungsanleitung

EVGA

EVGA 121-BL-E756 Bedienungsanleitung

EVGA

EVGA P55 LE Bedienungsanleitung

EVGA

EVGA P55 Micro V Bedienungsanleitung

EVGA

EVGA Z790 DARK K NGP N Bedienungsanleitung

EVGA

EVGA Z390 DARK Bedienungsanleitung

EVGA

EVGA NFORCE4 123-K8-NF47-XX Bedienungsanleitung

EVGA

EVGA 123-LF-E653-KR - P55 LE Motherboard Bedienungsanleitung

EVGA

EVGA 133-P4-NF51-AX Bedienungsanleitung

EVGA

EVGA Z370 MICRO Bedienungsanleitung

EVGA

EVGA 132-CK-NF79-A1 Bedienungsanleitung

EVGA

EVGA Z370 Classified K Bedienungsanleitung

EVGA

EVGA Z87 classified Systemhandbuch

EVGA

EVGA Z490 DARK Systemhandbuch

EVGA

EVGA Z97 FTW Bedienungsanleitung

EVGA

EVGA Z270 Classified-K Bedienungsanleitung

EVGA

EVGA nForce 750i SLI Bedienungsanleitung

EVGA

EVGA 132-GT-E768 Bedienungsanleitung

EVGA

EVGA EVGA X79 DARK Systemhandbuch

EVGA

EVGA 790i - nForce SLI FTW Motherboard Bedienungsanleitung

EVGA

EVGA nForce 780i SLI FTW Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung