Evoheat EVO COMMAND Series Bedienungsanleitung

CONTENT

1. Preface

2. Safety Precautions

2.1 Mark Notes

2.2 Icon Notes

2.3 Warning

2.4 Attention

3. Overall information of the heat pump

3.1 Device description

3.2 Features of the AIR HEAT PUMP

3.3 Running Range

3.4 New Technology

3.5 Specification data

3.6 Heat pump dimension and view

4. Installation

4.1 Transit

4.2 Installation occasions

4.3 Installation method

4.4 Water loop connection

4.5 Location of the unit

4.6 Water connection diagram

4.7 Power supply connection

4.8 Cable and switch

4.9 Trial running

5. Controlling and Operation

5.1 Main interface display and function

5.2 Usage of wire controller

5.3 Parameter table

5.4. interface diagram

6. Wiring diagram

7. Appendix

6.1 Caution & Warning

6.2 Cable specification

1. Preface

Positioning, installation and

commissioning must be

carried out by trained

personnel working in

accordance with these

operating and installation

instructions.

Where children or persons with limited

physical, sensory or mental capabilities

are to be allowed to control this equip-

ment ensure that this will only happen

under supervision or after appropriate

instructions by a person responsible for

their safety. Children should be super-

vised to ensure that they do not play with

the equipment.

Protection

Qualified only

For information

The pictures and drawings in this

manual is for your

infor-mation only.

The manufacture has the

right to chance or improve

the product when it is needed,

without prior notification to the

users of this device.

Necessary reading

When the product is delivered to the users, please check whether there is

any damage on the unit during transportation; If there is any please talk

with the forwarder or the contractor.

If the heat pump unit just can be installed a while latter, please keep it free

from damage, rust or abrasion by following methods.

1, all the access like the water connections must be sealed correctly;

2, the unit must be free from sunshine, and placed under 45 ;

3, the unit must be free from heavy dust to avoid dirty on the evaporator;

4, the unit must be placed free from chaos to avoid accident.

5, please check the unit during stock.

Quality check at first receipt of this product

Welcome to the Evo Command air source water heat pump. Your decision to

purchase heat pump will reward you for many years.

This is your assurance that you have purchased quality heat pump system

available,one that is manufactured in a state-of-the-art facility and go with

innovation.

Carefully read these operating and

installation instructions and keep them

safe. Should the equipment change

hands, pass these instructions to the

subsequent owner. Pass them to the

trained contractors for servicing

purposes.

2. Safety Precautions

To prevent the users and others from the harm of this unit, and avoid damage on

the unit or other property, and use the heat pump properly, please read this

manual carefully and understand the following information correctly.

The piping connection and wiring should be installed according to the local legal

laws and regulations as well as the profession standard.

Mark Notes

Mark Meaning

A wrong operation may lead to death or heavy injury on people.

A wrong operation may lead to harm on people or loss of material.

WARNING

ATTENTION

Icon Notes

Icon Meaning

Prohibition. What is prohibited will be nearby this icon.

Compulsory implement. The listed action need to be taken.

ATTENTION (include WARNING)

Please pay attention to what is indicated.

Warning

2. Safety Precautions

The heat pump must be installed by qualified personals,

to avoid improper installation which can lead to water

leakage, electrical shock or fire.

The heat pump must be installed by qualified personals,

to avoid improper installation which can lead to water

leakage, electrical shock or fire.

Installation

Professional installer

is required.

Earthing is required

Meaning

Operation Meaning

PROHIBITION

Shut off the power

DO NOT put fingers or others into the fans and evaporator

of the unit, otherwise harm may be occurred.

When there is something wrong or strange smell, the power

supply need to be shut off to stop the unit. Continue to run

may cause electrical short or fire.

Move and repair

Entrust

Prohibit

Entrust

When the heat pump need to be moved or installed again,

please entrust dealer or qualified person to carry it out.

Improper installation will lead to water leakage, electrical

shock, injury or fire.

It is prohibited to repair the unit by the user himself, otherwise

electrical shock or fire may be occur.

When the heat pump need to be repaired, please entrust

dealer or qualified person to carry it out. Improper movement

or repair on the unit will lead to water leakage, electrical

shock, injury or fire.

Meaning

2. Safety Precautions

Attention

Meaning

Installation

Fix the unit

Installation Place

Need

circuit breaker

The unit CANNOT be installed near the flammable gas.

Once there is any leakage of the gas, fire can be occur.

Make sure that the basement of the heat pump is strong

enough, to avoid any decline or fall down of the unit

Make sure that there is circuit breaker for the unit, lack of

circuit breaker can lead to electrical shock or fire.

Meaning

Switch off

the power

Prohibition

Please switch off the power for clean or maintenance.

It is prohibited to use copper or iron as fuse. The right fuse

must be fixed by electrician for the heat pump.

It is prohibited to spray the flammable gas to the heat pump,

as it may cause fire.

Operation

Prohibition

Check the

installation basement

Please check the installation basement in a period (one month),

to avoid any decline or damage on the basement, which may

hurt people or damage the unit

3.Overall information of the heat pump

3.1Device description

The Evo Command air source heat pump extracts heat from ambient air and

transfer it to water. By circulating the water, the energy is used to warm the

house efficiently. Through the usage of floor heating, the heat pump COP can

be as high as 4.5.

In reverse, cooling is also available when it is needed.

Compared with oil boiler, gas boiler and electrical heater, heat pump is the best

solution with high efficiency, safety and environment protect.

This air source heat pump use advanced heating tech-nology and intelligent

control system, to produce hot water at maximum temperature of 65oC for all

applications coupled with radiators, fan coils and floor heating.

In addition, the air heat pump can be used to provide hot water for sanitary use,

like kitchen, shower, etc.

3.2Features of the Evo Command

1, Save our planet---earth, by green technology

Heat pump transfer heat from air to the space for heating, so that there is no

burning, no waste, no dirty gas, thus maintain good environment for human and

save earth from waste.

2, High efficiency and money saving

The heat pump is driven by electricity, and annually average efficiency can be

higher than 4. By timer function, users can make use of the electric power at the

low point of a day, thus save money for every family.

3, Safe running

To use heat pump for heating can avoid electrical shot and burning, thus keep

people free from explosion or poisoning.

4, Easy operation

Heat pump is controlled and protected by micro-computor based contro-ller, the

desired water temperature is set according to real requirement. System

protection program will guarantee the unit to be running at hard environment.

3.Overall information of the heat pump

3.3 Running Range

Ambient temperature

Outlet water temperature

-40 -30 -20 -10 0 10 20 30 40 50

3.Overall information of the heat pump

Functions

Heating/Cooling

Smart defrost

Auto Protection

Multiple Module Control

Automatic Reset for Partial Failure

Auto Alert

Remote Control

Heat Pump Protection

Water flow protection

Compressor overload, discharge air temp protection

Discharge air pressure over high protection Suction

air pressure over low protection

Water(out) temperature over high protection

Water(out) temperature over low protection

Suspend anti-freezing protection in winter

Compressor frequent switching protection

3.Overall information of the heat pump

3.5 Specification data

Heating Capacity**((kW)

Power Consumption*(kW)

Cooling Capacity*(kW)

Power Consumption**(kW)

Current(Cooling/Heating)(A)

Power Supply

Compressor Quantity

Compressor Type

Fan Quantity

Fan Motor Input(W)

Fan Speed(RPW)

Noise [dB(A)]

Water Connection

Water Flow Volume (m3/h )

Water Pressure Drop(KPa)

Max. Power Input(kW)

Max. Running Current(A)

Net Weight

Unit Dimension (L/W/H)

Packing Size (L/W/H)

Evo Command 70

17.8

21.2

32.5/38.0

380~415V/3N~/50Hz

950

DN65

12.0

27.6

Gross Weight

Evo Command 140

138

141

38.5

43.6

70.3/78.4

380~415V/3N~/50Hz

950

DN80

23.7

58.1

99.1

(Subject to data on the nameplate)

(Subject to drawings of the heat pump)

(Subject to data on the package)

Refrigeration mode: the minimum temperature is 10 and the maximum temperature is 35 .

Heating mode: the minimum allowable setting temperature of the unit is 9 and the maximum

temperature is 50 .

The water inlet and outlet range of the unit is as follows:

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere evoheat Wärmepumpe Handbücher

evoheat

evoheat CS57 Bedienungsanleitung

evoheat

evoheat EVO ULTRA Series Bedienungsanleitung

evoheat

evoheat Force 26-3 Leitfaden

evoheat

evoheat EVO 270 Bedienungsanleitung

evoheat

evoheat CS Series Bedienungsanleitung

evoheat

evoheat Evo Fusion-i Bedienungsanleitung

evoheat

evoheat EVO MAX Series Bedienungsanleitung

evoheat

evoheat 270 Bedienungsanleitung

evoheat

evoheat EVO FLEX 10 Bedienungsanleitung

evoheat

evoheat CS Bedienungsanleitung

evoheat

evoheat H8A Kurzanleitung

evoheat

evoheat Fusion-i 7 Bedienungsanleitung

evoheat

evoheat Polaris LA 60 Kurzanleitung

evoheat

evoheat EVO150-1 Bedienungsanleitung

evoheat

evoheat EDGE-i Bedienungsanleitung

evoheat

evoheat Evo315-C Bedienungsanleitung

evoheat

evoheat CS-i Series Bedienungsanleitung

evoheat

evoheat EVO FLEX 10 Bedienungsanleitung

evoheat

evoheat CS-i Series Bedienungsanleitung

evoheat

evoheat Force-i 9 Bedienungsanleitung

evoheat

evoheat Evo315-C Bedienungsanleitung

evoheat

evoheat COMMAND-i Bedienungsanleitung

evoheat

evoheat FORCE Series Bedienungsanleitung

evoheat

evoheat Evo Control 17 Bedienungsanleitung

Beliebte Wärmepumpe Handbücher anderer Marken

MICROWELL

MICROWELL HP 1000 GREEN Bedienungsanleitung

Sanyo

Sanyo SAP120FCH Bedienungsanleitung

Daikin

Daikin EHYHBH05AA Bedienungsanleitung

Panasonic

Panasonic WH-SDF03E3E5 Leitfaden

Bryant

Bryant 544B Bedienungsanleitung

Airxcel

Airxcel 45000 Series Handbuch

Mitsubishi Electric

Mitsubishi Electric PUZ-SWM60VAA Bedienungsanleitung

Dimplex

Dimplex LI 16I-TUR Benutzerhandbuch

Carrier

Carrier WSHP Open v3 Kurzanleitung zur Einrichtung

TGM

TGM CTV14CN018A Bedienungsanleitung

Carrier

Carrier 38MGQ Series Bedienungsanleitung

Kokido

Kokido K2O K880BX/EU Fehlerbehebungshandbuch

Viessmann

Viessmann VITOCAL 300-G PRO Type BW 2150 Kurzanleitung

Carrier

Carrier 48EZN Bedienungsanleitung

Viessmann

Viessmann KWT Vitocal 350-G Pro Series Betriebsanleitung

Ariston

Ariston NIMBUS Bedienungsanleitung

Weishaupt

Weishaupt WWP L 7 Benutzerhandbuch

GE Zoneline AZ85H09EAC Bedienungsanleitung

evoheat EVO COMMAND Series Bedienungsanleitung

Beliebte Wärmepumpe Handbücher anderer Marken