Evolution Digital HD uDTA Bedienungsanleitung
HD uDTA Remote Control
TV Input*
Toggle TV Input
Info
View the channel name
and number, date and time
Page Up
For future use
Menu
Display the Main Menu
OK
Select a highlighted item
within Menus. Display channel name
and number, date and time
Volume
Audio up & down
Guide
For future use
Yellow A
Toggle to secondary language
(if available)
*TV must be programed with the remote
LED Indicator
Button press and special
command indication
TV Power*
Turn your TV on or off
Last
Return to the previous channel or menu
Exit
Return to watching TV
Page Down
For future use
Channel
Channel up & down
Mute
Sound on & off
Red C
Toggles through available
closed captioning
Setup
Program your remote control to your
STB and TV
NOTE
•Wheninsertingbatteries, make sure that the polarity (+/-) is correct.
•TheLEDonthetopoftheremoteisavisualindicatorthatconrmstheremotehaspower
when a button is pressed.
•Yourremotemayvary slightly from the one pictured here. However, basic functions
should remain the same.
To force remote control to send volume
control commands to the TV
1. Press and hold Setup button until the
LED Indicator turns green.
2. Press the volume up button
To force remote control to send volume
control commands to the HD STB
1. Press and hold Setup button until the
LED Indicator turns green.
2. Press the volume down button
Note: Refer to the Remote Control Programming and Operating instructions, provided with your remote control, to program your remote to work on your TV and
for more detailed information regarding pairing your remote.
3. Press and hold Setup button until the
LED Indicator turns green.
4. Press the Menu button.
Please allow a few seconds for the menu to display
5. Proceed by entering the pairing code
displayed in blue on the pairing code
pop-up screen.
Note: If you don’t see a pairing code screen, repeat steps 1 and 2.
Pair your remote control with your HD STB
to install it out of sight
Your remote control can be paired directly with your HD STB,
allowing you to place the device out of sight (in an entertain-
ment center or behind your TV, for example). Once your
remoteispairedtoaspecicHDSTB,itwillnotcontrolany
other set-top box in your home.
HD uDTA Remote Pairing
TO REMOVE REMOTE CONTROL PAIRING (FORCE UNPAIR)
Ifyouwouldliketouseyourremotecontrolforadifferentset-topbox,youmustrstun-pairtheremotecontrolfrom
the current device. Follow the steps below to remove the pairing.
1 Press and hold the Setup button for 3 seconds until the LED Indicator turns green.
2 Enter 9-8-7 on the remote control.
3 The LED Indicator will blink green twice.
TO RESET THE TV IR CODE
1 Press and hold the Setup button for 3 seconds until the LED Indicator turns green.
2 Enter 9-8-6 on the remote control.
3 The LED Indicator will blink green twice.
TO FACTORY RESET THE REMOTE CONTROL UNIT
1 Press and hold the Setup button for 3 seconds until the LED Indicator turns green.
2 Enter 9-8-1 on the remote control.
3 The LED Indicator will blink green twice.
1. Press the Menu button.
2. Select Remote Control and then select
Remote Control Pairing.
Andere Handbücher für HD uDTA
2
Andere Evolution Digital Fernbedienung Handbücher
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
