Evolution X-Session Montageanleitung

Evolution X-Session AdvancedUserGuide

Appendix H - X-Session PresetChart

Factory Preset

01 MIDI CC's 16-31 *

02 MIDI CC's 32-47 *

03 MIDI CC's 48-63 *

04 MIDI CC's 102-117 *

05 GM Preset

06 Reason native Preset

07 Pro-53 Preset

08 Rebirth Preset

09 Sampletank Preset

10 Sound Blaster Synth Preset

Presets 1 to 4 are designed for software that does not have default

MIDI CC's to control it's parameters, and instead uses a MIDI 'learn'

mode.

*The Cross Fader will send out CC10 for all presets 1-4. F18 is set to

'OFF', so that only cc10 is sent out when the cross fader is moved.

The buttons are assigned MIDI CC's such that their values will not clash

with any of the CC's assigned to the controllers in all four of these presets.

Evolution UC-33 Advanced User Guide

Evolution X-Session AdvancedUserGuide

In the X-Session Advanced Guide we have made the assumption that youhave been

through the X-Session Getting Started Guide which should havebeen supplied in printed

form with your X-Session. If you do not have this guide, please contact your local distribu-

tor or download it fromour website www.evolution.co.uk

The Getting StartedGuideshould insure that you are nowfamiliar with the basic op-

eration of the X-Session so thatwe nowcan focus on more in-depth features.

First however, we need to explain some terminologywe use throughout the guide.

Edit Mode

Edit Mode describesthe short periodafter a functionbutton has been pressedduring

which the parameters ofthatfunction canbe altered. The numerickeypad can be

usedto alter a parameter during this time. No data is sentout of the X-Session when it is

in Edit mode except for program and bank changes. LCD symbols shown in Edit mode

will flash to showyou thata particular parameter canbe edited. If anumber is part

entered, and a newcontrollerturned, thatnumber will become the relevantparameter

number for the newcontrollerand the 3 secondediting period will re-trigger.

Default mode

DefaultMode describes the state of the X-Session, when nofunction buttonshavebeen

pressed within thelast 3 seconds. In Defaultmode, the LCDwill showthe controller

symbol, and the2 digit displaywill showthe lastselected controller. The 3 digits

displaythecurrentlyassigned MIDICC number.

About The Advanced Guide

Terminology

EvolutionX-Session AdvancedUserGuide

Appendix F - Roland GS and Yamaha XG NRPN Sup-

port to Roland JV/XP

NRPN NRPN Data Data

MSB LSB MSB LSB

CC99 CC98 CC06 CC38

01 08 00-7F n/a (-64 - 0 - +63) Vibrato Rate (relative change)

01 09 00-7F n/a (-64 - 0 - +63) Vibrato Depth (relative change)

01 0A 00-7F n/a (-64 - 0 - +63) Vibrato Delay (relative change)

01 20 00-7F n/a (-64 - 0 - +63) Filter Cutoff Freq. (relative change)

01 21 00-7F n/a (-64 - 0 - +63) Filter Resonance (relative change)

01 63 00-7F n/a (-64 - 0 - +63) EG (TVF&TVA) Attack Time (relative change)

01 64 00-7F n/a (-64 - 0 - +63) EG (TVF&TVA) Decay Time (relative change)

01 66 00-7F n/a (-64 - 0 - +63) EG (TVF&TVA) Release Time (relative change)

*14 00-7F 00-7F n/a (-64 - 0 - +63) Drum Filter Cutoff Freq. (relative change)

*15 00-7F 00-7F n/a (-64 - 0 - +63) Drum Filter Resonance (relative change)

*16 00-7F 00-7F n/a (-64 - 0 - +63) Drum EG Attack Rate (relative change)

*17 00-7F 00-7F n/a (-64 - 0 - +63) Drum EG Decay Rate (relative change)

18 00-7F 00-7F n/a (-64 - 0 - +63) Drum Instrument Pitch Coarse (relative change)

*19 00-7F 00-7F n/a (-64 - 0 - +63) Drum Instrument Pitch Fine (relative change)

1A 00-7F 00-7F n/a (0 to Max) Drum Instrument Level (absolute change)

1C 00-7F 00-7F n/a (Random, L>C>R) Drum Instrument Panpot (absolute change)

1D 00-7F 00-7F n/a (0 to Max) Drum Instrument Reverb Send Level (absolute change)

1E 00-7F 00-7F n/a (0 to Max) Drum Instrument Chorus Send Level (absolute change)

%1F 00-7F 00-7F n/a (0 to Max) Drum Instrument Variation Send Level (absolute change)

* = added by Yamaha XG; % changed from Delay to Variation by Yamaha XG

Appendix G - General MIDI Reverb and Chorus

Types

Reverb Types

0: Small Room

1: Medium Room

2: Large Room

3: Medium Hall

4: Large Hall

8: Plate

Chorus Types

0: Chorus 1

1: Chorus 2

2: Chorus 3

3: Chorus 4

4: FB Chorus

5: Flanger

Evolution X-Session AdvancedUserGuide

00 Bank Select

01 Modulation

02 Breath Control

03 Controller 3

04 Foot Control

05 Porta Time

06 Data Entry

07 Channel Volume

08 Balance

09 Controller 9

10 Pan

11 Expression

12 Effects Controller 1

13 Effects Controller 2

14 Controller 14

15 Controller 15

16 Gen Purpose 1

17 Gen Purpose 2

18 Gen Purpose 3

19 Gen Purpose 4

20 Controller 20

21 Controller 21

22 Controller 22

23 Controller 23

24 Controller 24

25 Controller 25

26 Controller 26

27 Controller 27

28 Controller 28

29 Controller 29

30 Controller 30

31 Controller 31

32 Bank Select LSB

33 Modulation LSB

34 Breath Control LSB

35 Controller 35

36 Foot Control LSB

37 Porta Time LSB

38 Data Entry LSB

39 Channel Volume LSB

40 Balance LSB

41 Controller 41

42 Pan LSB

43 Expression LSB

44 Controller 44

45 Controller 45

46 Controller 46

47 Controller 47

48 Gen Purpose 1 LSB

49 Gen Purpose 2 LSB

50 Gen Purpose 3 LSB

51 Gen Purpose 4 LSB

52 Controller 52

53 Controller 53

54 Controller 54

55 Controller 55

56 Controller 56

57 Controller 57

58 Controller 58

59 Controller 59

60 Controller 60

61 Controller 61

62 Controller 62

63 Controller 63

64 Sustain Pedal

65 Portamento

66 Sostenuto

67 Soft Pedal

68 Legato Pedal

69 Hold 2

70 Sound Variation

71 Resonance

72 Release Time

73 Attack Time

74 Cut-off Frequency

75 Controller 75

76 Controller 76

77 Controller 77

78 Controller 78

79 Controller 79

80 Gen Purpose 5

81 Gen Purpose 6

82 Gen Purpose 7

83 Gen Purpose 8

84 Portamento Control

85 Controller 85

86 Controller 86

87 Controller 87

88 Controller 88

89 Controller 89

90 Controller 90

91 Reverb Depth

92 Tremelo Depth

93 Chorus Depth

94 Celeste (De-tune)

95 Phaser Depth

96 Data Increment

97 Data Decrement

98 Non-Reg Param LSB

99 Non-Reg Param MSB

100 Reg Param LSB

101 Reg Param MSB

102 Controller 102

103 Controller 103

104 Controller 104

105 Controller 105

106 Controller 106

107 Controller 107

108 Controller 108

109 Controller 109

110 Controller 110

111 Controller 111

112 Controller 112

113 Controller 113

114 Controller 114

115 Controller 115

116 Controller 116

117 Controller 117

118 Controller 118

119 Controller 119

Channel Mode Messages

120 All Sound off

121 Reset all Controllers

122 Local Control

123 All Notes Off

124 Omni Off

125 Omni On

126 Mono On (Poly Off)

127 Poly On (Mono Off)

Extra RPN Messages

128 Pitch Bend sensitivity

129 Fine Tune

130 Coarse Tune

131 Channel Pressure

Appendix E -

Standard MIDI Controller numbers (MIDI CC’s)

Evolution UC-33 Advanced User Guide

“On The Fly”

Operations

Evolution X-Session AdvancedUserGuide

You can at any one time send out a program change message to you sound card, sound

module, instrument or whatever other device will receive this standard MIDI message.

The program change will be sent on the global MIDI channel.

1. Press the PROGRAM button.

2. Type in the program number you wish to send, using the numerical keypad

or the +/- keys.

Example:TheLCD display the PROG symbolinthe right hand corner

Indicating that the PROGRAM button has been pressed. The program

value sent is 00 and its sent on the global MIDI channel 01.

You can also program the assignable buttons to send out fixed program messages to

individual MIDI channels. For further information regarding this method, please go to

pages 5 to 9.

Global MIDI channel: For more information, please go to page 10.

If your receiving device has more than 128 presets, you may be able to access the

additional banks bysending out bankchange LSBand MSB messages.

1. Press the DATA LSB or DATA MSB button.

2. Type in the bank number you wish to send, using the numerical keypad or

the +/- keys.

Please check the documentation for yourreceivingdevice to ensure that itwill respond

to these messages. For more information about LSB and MSB, please see the chapter

“Program and Bank Changes Explained” on page 17 in this manual.

Press the +/- buttons together to send a SNAP SHOT of the

current X-Session controller assignmentsandtheir values.

When you send a snapshot, the LCD will displaythe SNAPSHOTsymbol.

The data for an individual controller will be sent on which ever channel that

controller has been assigned to.

Snap Shot isone wayof synchronizing the receiving devicewith the X-Session

and can be used as a creative tool, with interesting and surprising results.

The data sent when SNAP SHOT is pressed, can be viewed in your sequencers list

editor. Set your sequencer to record and press SNAP SHOT. Then open the list editor

and ensure its set to display controller data.

Sending Program Changes On The Fly

Sending Bank Changes On The Fly

Sending Snap Shot

EvolutionX-Session AdvancedUserGuide

MIDI Note Numbers

Octave

(n) Note Numbers

Cn C#n Dn D#n En Fn F#n Gn G#n An A#n Bn

-1 0 1 2 3 4 5 6 7 8 9 10 11

0 12 13 14 15 16 17 18 19 20 21 22 23

1 24 25 26 27 28 29 30 31 32 33 34 35

2 36 37 38 39 40 41 42 43 44 45 46 47

3 48 49 50 51 52 53 54 55 56 57 58 59

4 60 61 62 63 64 65 66 67 68 69 70 71

5 72 73 74 75 76 77 78 79 80 81 82 83

6 84 85 86 87 88 89 90 91 92 93 94 95

7 96 97 98 99 100 101 102 103 104 105 106 107

8 108 109 110 111 112 113 114 115 116 117 118 119

9 120 121 122 123 124 125 126 127

Evolution X-Session AdvancedUserGuide

Appendix D - Useful MIDI data

General MIDI Instruments

Piano Bass Reed Synth Effects

0 Acoustic Grand Piano

1 Bright Acoustic Piano

2 Electric grand Piano

3 Honky Tonk Piano

4 Electric Piano 1

5 Electric Piano 2

6 Harpsichord

7 Clavinet

32 Acoustic Bass

33 Electric Fingered

Bass

34 Electric Picked Bass

35 Fretless Bass

36 Slap Bass 1

37 Slap Bass 2

38 Syn Bass 1

39 Syn Bass 2

64 Soprano Sax

65 Alto Sax

66 Tenor Sax

67 Baritone Sax

68 Oboe

69 English Horn

70 Bassoon

71 Clarinet

96 SFX Rain

97 SFX Soundtrack

98 SFX Crystal

99 SFX Atmosphere

100 SFX Brightness

101 SFX Goblins

102 SFX Echoes

103 SFX Sci-Fi

Chromatic Percussion Strings/Orchestra Pipe Ethnic

8 Celesta

9 Glockenspiel

10 Music Box

11 Vibraphone

12 Marimba

13 Xylophone

14 Tubular bells

15 Dulcimer

40 Violin

41 Viola

42 Cello

43 Contrabass

44 Tremolo Strings

45 Pizzicato Strings

46 Orchestral Harp

47 Timpani

72 Piccolo

73 Flute

74 Recorder

75 Pan Flute

76 Bottle Blow

77 Shakuhachi

78 Whistle

79 Ocarina

104 Sitar

105 Banjo

106 Shamisen

107 Koto

108 Kalimba

109 Bag Pipe

110 Fiddle

111 Shanai

Organ Ensemble Synth Lead Percussive

16 Drawbar Organ

17 Percussive Organ

18 Rock Organ

19 Church Organ

20 Reed Organ

21 Accordion

22 Harmonica

23 Tango Accordion

48 String Ensemble 1

49 String Ensemble 2

(Slow)

50 Syn Strings 1

51 Syn Strings 2

52 Choir Aahs

53 Voice Oohs

54 Syn Choir

55 Orchestral Hit

80 Syn Square Wave

81 Syn Sawtooth Wave

82 Syn Calliope

83 Syn Chiff

84 Syn Charang

85 Syn Voice

86 Syn Fifths Sawtooth

Wave

87 Syn Brass & Lead

112 Tinkle Bell

113 Agogo

114 Steel Drums

115 Woodblock

116 Taiko Drum

117 Melodic Tom

118 Syn Drum

119 Reverse Cymbal

Guitar Brass Synth Pad Sound Effects

24 Nylon Acoustic

25 Steel Acoustic

26 Jazz Electric

27 Clean Electric

28 Muted Electric

29 Overdrive

30 Distorted

31 Harmonics

56 Trumpet

57 Trombone

58 Tuba

59 Muted Trumpet

60 French Horn

61 Brass Section

61 Syn Brass 1

62 Syn Brass 2

88 New Age Syn Pad

89 Warm Syn Pad

90 Polysynth Syn Pad

91 Choir Syn Pad

92 Bowed Syn Pad

93 Metal Syn Pad

94 Halo Syn Pad

95 Sweep Syn Pad

120 Guitar Fret Noise

121 Breath Noise

122 Seashore

123 Bird Tweet

124 Telephone Ring

125 Helicopter

126 Applause

127 Gun Shot

EvolutionX-Session AdvancedUserGuide

To Muteall controllers and the cross fader, press the CTRL MUTE buttons.

This allows you to alter the position of the controller without affecting the settings of your

software. CTRL MUTEdoes not affect buttons,andassoon as an assignable button or

a function key is pressed, the controllers are turned back on. Alternatively, you can

press the CTRL MUTE buttons again to turn the controllers back on.

When you first press the CTR MUTE buttons, you will see the LCD display ’OFF’. Chang-

ing the position of a controller with controller mute engaged, the LCD will always display

OFF to indicate no data is being sent out bytheX-Session. To cancelthe controller mute

function, simply press a function key (or keys) or one of the assignable buttons.

This is a veryuseful feature ifyou are switchingbetween presetson the X-Session with

the controllers out ofposition. You will be ableto move the controller to aposition relative

to the software’s controller value,rather thancausing the software’s controllervalue to

jump.

You can also use this feature for creativemixing and interesting DJtypecontrol.If for

instance you use the X-Session asa conventional volume mixer, tryengagingthe

controller mute function, change the volume up or down of various channels and press

the SNAP SHOTbuttons. Thisformof mixing is verydynamicand can not bedone using

a conventional mixer.

The cross Fader can be assigned to two MIDI CC values, by editing F17 and F18.

When it is moved, both F17 and F18 will be sent out. F17 will increment from left to right,

while F18 will increment from right to left. So, F17 and F18 work against each other.

As an example, this has been put to practice in the Rebirth preset:

F17 controls the volume of the top drum module, while F18 controls the volume of the

bottom drum module. This means you can flick between the two modules by flicking

the fader far left or right, since when F17 is 0, F18 is 127, and when F18 is 0 F17 is 127.

To select F18 for programming, you need to use the CONTROL SELECT Buttons.

F17 can be selected for editing by moving the cross fader.

Muting All Controllers

About the Cross Fader

Evolution X-Session AdvancedUserGuide

EvolutionX-Session AdvancedUserGuide

Appendix C - Hexadecimal Conversion Chart

Hexadecimal to Decimal Conversion Chart

Hexadeci-

mal value Decimal

Value Hexadeci-

mal value Decimal

Value Hexadeci-

mal value Decimal

Value

0 0 2B 43 56 86

1 1 2C 44 57 87

2 2 2D 45 58 88

3 3 2E 46 59 89

4 4 2F 47 5A 90

5 5 30 48 5B 91

6 6 31 49 5C 92

7 7 32 50 5D 93

8 8 33 51 5E 94

9 9 34 52 5F 95

0A 10 35 53 60 96

0B 11 36 54 61 97

0C 12 37 55 62 98

0D 13 38 56 63 99

0E 14 39 57 64 100

0F 15 3A 58 65 101

10 16 3B 59 66 102

11 17 3C 60 67 103

12 18 3D 61 68 104

13 19 3E 62 69 105

14 20 3F 63 6A 106

15 21 40 64 6B 107

16 22 41 65 6C 108

17 23 42 66 6D 109

18 24 43 67 6E 110

19 25 44 68 6F 111

1A 26 45 69 70 112

1B 27 46 70 71 113

1C 28 47 71 72 114

1D 29 48 72 73 115

1E 30 49 73 74 116

1F 31 4A 74 75 117

20 32 4B 75 76 118

21 33 4C 76 77 119

22 34 4D 77 78 120

23 35 4E 78 79 121

24 36 4F 79 7A 122

25 37 50 80 7B 123

26 38 51 81 7C 124

27 39 52 82 7D 125

28 40 53 83 7E 126

29 41 54 84 7F 127

2A 42 55 85

Evolution X-Session AdvancedUserGuide

B2-The Buttons:

MIDI CC Description Program

(Press Twice) Data Lsb

(Press Twice) Data Msb

(Press Twice)

0-119 Standard MIDI CC’s - Toggle Value 2 Toggle Value 1

120-127 Channel Mode

Messages - Toggle Value 2 Toggle Value 1

128 Pitch Bend Range - Sensitivity value -

129 Channel Fine Tune - Tuning amount -

130 Channel Coarse Tune- Tuning amount -

131 Channel Pressure - Pressure amount -

132 RPN Coarse Value RPN LSB RPN MSB

133 RPN Fine Value RPN LSB RPN MSB

134 NRPN Coarse Value NRPN LSB NRPN MSB

135 NRPN Fine Value NRPN LSB NRPN MSB

136 Master Volume GM* - Volume LSB Volume MSB

137 Master Pan GM* - Pan LSB Pan MSB

138 Master Coarse Tune

GM* - Tuning LSB Tuning MSB

139 Master Fine Tune

GM* - Tuning LSB Tuning MSB

140 Chorus Mod rate

GM2* - Mod rate -

141 Chorus Mod Depth

GM2* - Mod depth -

142 Feedback GM2* - Feedback level -

143 Send to Reverb GM2*- Reverb send

level -

144 Pitch Bend - Pitch shift LSB Pitch shift MSB

145 Program/Bank Preset Program Bank LSB Bank MSB

146 MIDI CC (on/off) MIDI CC Button press

value Button release

value

147 Note (on/off) Note Velocity off Velocity on

148 Note (on/off toggle) Note Velocity off Velocity on

149 MMC Command** - Command select. -

150 Reverb type GM2 * - Type -

151 Reverb time GM2 * - Time -

152 Chorus type GM2* - Type -

255 Controller Off*** - - -

* Sysex messages - for details please see pages 8 & 18.

** MMC Sysex messages, for details please see page 11.

*** This value cannot be typed in using the numerical keypad. Type in 144 and

then press the '+'button to set this value, or 0 and press the '-' button.

Evolution UC-33 Advanced User Guide

Programming

Editing

The X-Session

Evolution X-Session AdvancedUserGuide

Each of the X-Session’s 28 controllerscan send MIDICC, RPN/NRPN,GM1&2 SysEx

and even be assigned to individualMIDIchannels.

MIDICC (continuous controller)numbersare part ofthe standard MIDIspecifications and

are typically used to control the real-time changing of parameters in musical equipment.

For a complete list of standard MIDI controller numbers from 0 to 131, please see

Appendix E on page 29.

Anyof the 28 real-timecontrollers on theX-Session can be assigned toa MIDICC

number however the 10assignablebuttonshaveslightlydifferent options fromthecross

faderor 16 rotarycontrollers.

The following 2 chartsshowallthe transmit messages you can program for each

of the18fader/controllersand 10assignableMIDIbuttonsrespectively.We showyou this

alreadyatthisstage,so youcan followthe principleofprogrammingthe X-Session

controllers in the following instructionsand examples.

Please payextra attention to the differencesbetween howyou programthe cross fader or

controllers and how you program the buttons.

Introduction ToX-Session Programming Options

ASSIGN Description Data Lsb

(Press Twice) Data Msb

(Press Twice)

0-119 Standard MIDI CC’s - -

120-127 Channel Mode Messages - -

128 Pitch Bend Sensitivity - -

129 Channel Fine Tune - -

130 Channel Coarse Tune - -

131 Channel Pressure - -

132 RPN coarse RPN LSB RPN MSB

133 RPN fine RPN LSB RPN MSB

134 NRPN coarse NRPN LSB NRPN MSB

135 NRPN fine NRPN LSB NRPN MSB

136 Master Volume GM* --

137 Master Pan* --

138 Master Coarse Tune* --

139 Master Fine Tune* --

140 Chorus Mod rate** --

141 Chorus Mod Depth** --

142 Feedback** --

143 Send to Reverb** --

144 Pitch Bend --

255 Controller Off**** - -

Cross Fader & Rotary Dials

* General MIDI SysEx messages - for details please see pages 8 & 18.

** General MIDI 2 SysEx messages

*** MMCSysex messages, for details please see page 11.

****This value cannot be typed in usingthe numerical keypad. Use '+' or '-'.

EvolutionX-Session AdvancedUserGuide

Appendix B - Assignable MIDI CC’s

on the X-Session

B1 - The Cross Faderand rotary Controllers:

MIDI CC Description Data Lsb (Press

Twice) Data Msb (Press

Twice)

0-119 Standard MIDI CC’s - -

120-127 Channel Mode Messages - -

128 Pitch Bend Sensitivity - -

129 Channel Fine Tune - -

130 Channel Coarse Tune - -

131 Channel Pressure - -

132 RPN coarse RPN LSB RPN MSB

133 RPN fine RPN LSB RPN MSB

134 NRPN coarse NRPN LSB NRPN MSB

135 NRPN fine NRPN LSB NRPN MSB

136 Master Volume GM* --

137 Master Pan GM* --

138 Master Coarse Tune GM* --

139 Master Fine Tune GM* --

140 Chorus Mod rate GM2* --

141 Chorus Mod DepthGM2*--

142 Feedback GM2* --

143 Send to Reverb GM2* --

144 Pitch Bend --

255 Controller Off*** - -

* Sysex messages - for details please see pages 8 & 18.

** MMC Sysex messages, for details please see page 11.

*** This value cannot be typed in using the numerical keypad. Type in 144 and

then press the '+'button to set this value, or 0 and press the '-' button.

Evolution X-Session AdvancedUserGuide

Appendix A - MIDI IMPLEMENTATION CHART

Function Transmitted Received Remarks

Basic :Default

Channel:Changed 1-16

1-16 X

:Default

Mode :Messages

:Altered

---------

********* X

Note

Number:True Voice 0-127

********* X

Velocity: Note ON

: Note OFF 0

0 X

After : Keys

Touch :Ch’s 0

0 X

Pitch Bend 0 X

Control 0-119

Change 0 X

120-127 0 X

Program

Change:True Number 0-127

********* X

System Exclusive GM, GM2, MMC Memory

Dump

Song Position

Common:Song Select

System :Clock

Exclusive:Commands X

0 X

Aux :Local ON/OFF

Messages :All Notes OFF

:Active Sense

:Reset

Notes: 0 = YES X=NO

EvolutionX-Session AdvancedUserGuide

ASSIGN Description Program

(Press Twice) Bank LSB (Press

Twice) Data Msb (Press

Twice)

0-119 Standard MIDI CC’s - Toggle Value 2 Toggle Value 1

120-127 Channel Mode Messages- Toggle Value 2 Toggle Value 1

128 Pitch Bend Sensitivity - Sensitivity value -

129 Channel Fine Tune - Tuning amount -

130 Channel Coarse Tune - Tuning amount -

131 Channel Pressure - Pressure amount -

132 RPN Coarse Value RPN LSB RPN MSB

133 RPN Fine Value RPN LSB RPN MSB

134 NRPN Coarse Value NRPN LSB NRPN MSB

135 NRPN Fine Value NRPN LSB NRPN MSB

136 Master Volume* - Volume LSB Volume MSB

137 Master Pan* - Pan LSB Pan MSB

138 Master Coarse Tune* - Tuning LSB Tuning MSB

139 Master Fine Tune* - Tuning LSB Tuning MSB

140 Chorus Mod rate** - Mod rate -

141 Chorus Mod Depth** - Mod depth -

142 Feedback** - Feedback level -

143 Send to Reverb** - Reverb send level -

144 Pitch Bend - Pitch shift LSB Pitch shift MSB

145 Program/Bank Preset Program Bank LSB Bank MSB

146 MIDI CC (on/off) MIDI CC Button release value Button press value

147 Note (on/off) Note Velocity off Velocity on

148 Note (on/off toggle) Note Velocity off Velocity on

149 MMC Command*** - Command select. -

150 Reverb type ** - Type -

151 Reverb time ** - Time -

152 Chorus type ** - Type -

255 Controller Off**** - - -

Assignable MIDI Buttons

Selecting A Controller For Editing

Beforeyou canassigna MIDICC tooneofthe X-Session’scontrollers, you will need to

select it for editing.There are2 methods for doing this:

1. Press CONTROL SELECT. The LCD will displaythe CONTROLLER symbol.

The symbol will be flashing to indicate the controller settings can be altered. The

3-digit display will show the number of the currently selected controller, proceeded

bya 'C', or an 'F'if the cross fader is selected.

2. Type in the number of the controller using the numeric keypad, or the +/-

buttons.

Movethe cross fader/rotarycontroller.

Simplymoving a fader/rotarycontroller will make itthe currentlyselected

controller, readyfor editing.

To select the second cross fader controller value (F18) please use method 1.

It is also not possibleto selectanyof the 10numericalbuttons by pressing them,

since during edit mode, theyare used to enter numerical values. To program these

buttons, pleaseuse thefirstmethod.

Evolution X-Session AdvancedUserGuide

Once the controller you want to edit has been selected, you can change the assigned

MIDICC number inthefollowing way:

1. Press ASSIGN. The LCD will flash the CC symbol.

The 3 digit displaywill indicatethe currentlyassignedMIDICC number.

2. Type in a newMIDI CC value using the numeric keypad or ’+’and ’-’buttons.

The MIDIcontroller number you selectwill be assigned to the currentlyselected

controller, shown bythe number on the small, 2-digit display.

Example: After pressingASSIGN, the display showsthe

cc symboland inthis casedisplaysthatcurrentlythe MIDI CC 07 is

assignedto controller number 13.

1. Select the controlleryou want to editas described earlier.

2. Press CHANNEL.

The LCD will display the CHAN symbol and the 3-digit display will show the

current channel assignment of the selected controller, preceded by a ’c’. The

small 2-digit display will show the currently selected controller for assignment.

3. Type the MIDI channel number (01-16) you want the controller to send to,

using the numeric keypad or the +/- keys.

If the controller is assigned to channel 00, it will transmit on the global channel.

The X-Session’s global MIDIchannel affectsonlythe controllersthat have the individual

MIDI channel assigned to value 00, as described in the previous section.

Here is how you change the global MIDI channel:

1. Press GLOBAL CHANNEL (ASSIGN and CHANNEL together).

The LCD will display the KEYBOARD and CHAN symbol. The 3-digit display will

showthe currentlyselected global channel, preceeded bya 'c'.

2. Type in the MIDI channel number (01-16) using the numeric keypad or

the +/- keys.

Example: MIDI channel 01 is assigned as global MIDI channel.

Using a combination of global MIDI channel and individually assigned MIDI channels can

be a great way of navigating through your system.With multitimbral instruments such as

Reason, it can be easier to justchange the global MIDIchannel on the X-Session in order

to jumpto the nextdevice, ratherthan operating thesoftware.

Assigning An Individual MIDI Channel

Changing The Global MIDI Channel

Assigning MIDI CC’s

EvolutionX-Session AdvancedUserGuide

Appendix A –G

Factory Preset List

Inhaltsverzeichnis

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung