Replacing the Bulbs: (Please ensure that the appliance is disconnected from the mains supply before proceeding).
Models: Amathus,Casis,Seraph,Phantom The above models use x1–STD Bayonet 20W Energy saving lamps.
To change the bulbs in this product you must first remove all pebbles,coals,logs or embers from the orange fuel bed.
1. Locate the x2 fixing screws on the left and the right side of the Fret.(4x in total).
2. Remove all 4x screws to release the fret. This will allow access to the bulb).
3. Replace faulty bulb and reverse steps 1,2.
Models: Saphir,Casal,Caleta,Costanza,Tiago:
The above models use x1–STD Bayonet 20W Energy saving lamps.
To change the bulbs in this product you must first remove all pebbles,coals,logs or embers from the orange fuel bed.
1. Remove Fret & Ash pan.
2. Locate 3x screws from the front (blanking) Plate.
3. Remove all x3 screws to release the blanking plate. This will allow access to the bulb).
4. Replace faulty bulb and reverse steps 1,2,3.
Model: Almyra
The above models use x2–STD Bayonet 20W Energy saving lamps.
To change the bulbs in this product you must first remove all pebbles,coals,logs or embers from the orange fuel bed.
1. Remove fascia/Front. Lift and unhook).
2. Locate 3x screws from the front (blanking) Plate.
3. Remove all x3 screws to release the blanking plate. This will allow access to the bulb).
4. Replace faulty bulb and reverse steps 1,2,3.
Model: Londa
The above model uses x1–STD Bayonet 20W Energy saving lamps.
1. To change the bulbs in this product you must first remove all pebbles,coals,logs or embers from the orange fuel bed.
2. Locate 3x screws on the left and the right of the fire case.(6x in total).
3. Remove all 6x screws to release the fascia. This will allow access to the bulb).
4. Replace faulty bulb and reverse steps 1,2,3.
Please Note: EVOFLAME & EVO3D Products do not require replacement bulbs. (LED).
3
