EVS XSnano Merkblatt

CONFIGURATION MANUAL

Version 12.02 - April 2014

Disclaimer

The information in this manual is furnished for informational use only and subject to

change without notice. While every effort has been made to ensure that the information

contained in this user manual is accurate, up-to-date and reliable, EVS Broadcast

Equipment cannot be held responsible for inaccuracies or errors that may appear in this

publication.

Improvement Requests

Your comments will help us improve the quality of the user documentation. Do not

hesitate to send improvement requests, or report any error or inaccuracy on this user

manual by e-mail to doc@evs.com.

Regional Contacts

The address and phone number of the EVS headquarters are usually mentioned in the

Help > About menu in the user interface.

You will find the full list of addresses and phone numbers of local offices either at the end

of this user manual (for manuals on hardware products) or at the following page on the

EVS website: http://www.evs.com/contacts.

User Manuals on EVS Website

The latest version of the user manual, if any, and other user manuals on EVS products

can be found on the EVS download center, on the following webpage:

http://www.evs.com/downloadcenter.

CONFIGURATION MANUAL XSnano Server 12.02

Table of Contents

TABLE OF CONTENTS III

WHAT'S NEW? VII

1. INTRODUCTION 1

1.1. Introduction to the Configuration of EVS Servers 1

1.2. Introduction to the Manual 4

1.3. Starting the EVS Server 4

1.4. Accessing the Web-Based Interface 5

2. MULTICAM SETUP 6

2.1. Overview of User Interfaces 6

2.1.1. Overview of the Setup Areas 6

2.1.2. Navigability and Commands 9

2.2. Configuration Lines 11

2.2.1. Chapter Contents 11

2.2.2. Launching a Configuration 12

2.2.3. Editing a Configuration 13

2.2.4. Renaming Configuration Lines 14

2.2.5. Exporting and Importing Configuration Lines 15

2.2.6. Changing the Position of Configuration Lines 20

2.2.7. Copying, Pasting and Deleting Configuration Lines 20

2.3.1. Chapter Contents 22

2.3. Server Parameters 22

2.3.2. Assigning a Server Facility Name 22

2.3.3. Activating and Deactivating the Password Protection 23

2.3.4. Setting the Server LAN PC Address 25

2.3.5. Setting the Server Date and Time 26

2.3.6. Setting the Default Output To VGA/Video 28

2.3.7. Configuring Server Raids 28

2.4. Licenses and Maintenance 31

2.4.1. Overview on Options Codes Management 31

2.4.2. Options Codes Management Window 32

2.4.3. Entering and Removing License Codes 33

2.5.1. Chapter Contents 36

2.5. Server Maintenance 36

2.5.2. Rebooting the EVS Server 36

2.5.3. Hardware Check 36

2.5.4. Clearing Video Disks 40

CONFIGURATION MANUAL XSnano Server 12.02

Table of Contents III

2.5.5. Exporting Log Files 41

3. MULTICAM CONFIGURATION 42

3.1. Overview on User Interfaces 42

3.1.1. Introduction 42

3.1.2. Overview of the Multicam Configuration Window 44

3.1.3. Navigating and Editing in the Multicam Configuration Window 48

3.1.4. Overview of the Setup Menus in the Remote Panel 50

3.1.5. Navigating and Editing in the Setup Menus of the Remote Panel 51

3.1.6. Required Application Reboot 52

3.2. Supported Configurations 54

3.2.1. General Information on Supported Configurations 54

3.2.2. SD/HD Base Configurations 58

3.2.3. General Information on 3D Configurations 61

3.2.4. 3D Standard Configurations 61

3.3. Server Tab 64

3.3.1. Overview 64

3.3.2. Video Codecs and Reference 65

3.3.3. Phase Definition Settings 77

3.3.4. Interpolation Settings 78

3.3.5. PC LAN Settings 79

3.4. Channels Tab 81

3.4.1. Overview 81

3.4.2. Channels 83

3.4.3. Audio 95

3.4.4. Timecode and Data Insertion 112

3.5. Network Tab 121

3.5.1. Overview 121

3.5.2. Net Name 121

3.5.3. Gigabit Settings 122

3.6. Monitoring Tab 124

3.6.1. Overview 124

3.6.2. Multiviewer Settings 124

3.6.3. OSD Settings 127

3.6.4. Monitoring Settings 128

3.7. Protocol Tab 131

3.7.1. Overview 131

3.7.2. Clip Identifiers 132

3.7.3. Sony BVW Settings 132

3.7.4. RS422VarID Settings 134

3.8. GPI Tab 137

3.8.1. Overview 137

3.8.2. GPI Settings 138

3.8.3. Tally Settings 142

3.9. Operation Tab 144

IV Table of Contents

EVS Broadcast Equipment SA Issue 12.02.C- April 2014

3.9.1. Overview 144

3.9.2. OSD Settings 147

3.9.3. Audio Meters OSD Settings 148

3.9.4. Clips Settings 150

3.9.5. Playlist Settings 155

3.9.6. Protection Settings 159

3.9.7. Push Settings 160

3.9.8. Audio Settings 163

3.9.9. EVS Controller Settings 164

4. MONITORING 169

4.1. Server Monitoring 169

4.1.1. Overview on Server Monitoring Windows 169

4.1.2. General Information Window 170

4.1.3. Raid and Disk Status Window 172

4.1.4. Timecode Status Window 175

4.1.5. Timecode Monitoring Window 177

4.1.6. Log Management 178

4.2. SDTI Network Monitoring 180

4.2.1. Overview on SDTI Network Monitoring Windows 180

4.2.2. SDTI Network Schema 180

4.2.3. Hardware Error Counters 182

4.2.4. Disconnecting a Machine from the XNet Network 182

GLOSSARY 185

CONFIGURATION MANUAL XSnano Server 12.02

Table of Contents V

What's New?

In the Multicam Configuration manual, the icon has been added on the left

margin to highlight information on new and updated features in release 12.02.

Multi-essence configurations: Intra + LongGOP / LongGOP only / Intra only

Please refer to the release notes for limitations with the LongGOP only configuration.

• See section "About Multi-Essence" on page 67

• See section "Codec Availability" on page 71

• See section "Codec Settings" on page 68

• See section "Codec-Related Information" on page 72

• See section "Clips Settings" on page 150

• See section "Push Settings" on page 160

• See section "Clearing Video Disks" on page 40

• See section "Launching a Configuration" on page 12

Support of XAVC codec in playout

• See section "Codec Settings" on page 68

Rationalized management of Aspect Ratio

• See section "Video and Reference Settings" on page 65

• See section " Monitoring Settings" on page 128

Improved behavior of J3 connector for monitoring purposes

See section " Monitoring Settings" on page 128

The following changes unrelated to new features have been brought to the user manual:

The sections on Server and SDTI Monitoring have been added:

See section "SDTI Network Monitoring" on page 180

See section "Server Monitoring" on page 169

CONFIGURATION MANUAL XSnano Server 12.02

What's New? VII

Andere Handbücher für XSnano

Inhaltsverzeichnis

Andere EVS Server Handbücher

EVS

EVS XS Produkthandbuch

EVS

EVS XT nano Gebrauchs- und Pflegehandbuch

EVS

EVS XT2+ Gebrauchs- und Pflegehandbuch

EVS

EVS XT-3 Gebrauchs- und Pflegehandbuch

EVS

EVS XT-3 Gebrauchs- und Pflegehandbuch

EVS

EVS XS Gebrauchs- und Pflegehandbuch

EVS

EVS LSM Connect Bedienungsanleitung

EVS

EVS GX Bedienungsanleitung

EVS

EVS XS Produkthandbuch

EVS

EVS XT2+ Gebrauchs- und Pflegehandbuch

EVS

EVS GX Bedienungsanleitung

EVS

EVS XS Gebrauchs- und Pflegehandbuch

EVS

EVS XT-3 Gebrauchs- und Pflegehandbuch

EVS

EVS XSnano Gebrauchs- und Pflegehandbuch

EVS

EVS GX Bedienungsanleitung

EVS

EVS XS Gebrauchs- und Pflegehandbuch

EVS

EVS XS Gebrauchs- und Pflegehandbuch

EVS

EVS XT nano Gebrauchs- und Pflegehandbuch

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung