Exor eX710G Bedienungsanleitung
eX700 Series
Operating Instructions
User’s Manual for eX700 Series Touchscreen Products
MANUGENEX7xx - Version 2.12
© 2018-2022 EXOR International S.p.A.
2
MANUGENEX7xx - Version 2.12
© 2018-2022 EXOR International S.p.A. - Subject to change without notice
Copyright © 2018-2022 Exor International S.p.A. – Verona, Italy
Subject to change without notice
The information contained in this document is provided for informational purposes only. While efforts were made to verify the accuracy of the information
contained in this documentation, it is provided “as is” without warranty of any kind.
Third-party brands and names are the property of their respective owners.
www.exorint.com
Software available in these products is based on OpenSource. Visitoss.exorint.netfor more details.
3
MANUGENEX7xx - Version 2.12
© 2018-2022 EXOR International S.p.A. - Subject to change without notice
Table of Contents
Introduction 4
Safety Guide 5
1 Product Overview 6
2 Standards and Approvals 7
3 Technical Specications 9
4 Technical Data 11
4.1 Dimensions 14
4.2 Installation Environment 16
4.3 Safety instruction 17
4.4 Installation Procedure 17
5 Connections 18
5.1 Serial Port 20
5.2 Ethernet Port 20
5.3 Optional plugin module 21
5.4 Optional plugin module identication 22
5.5 Optional plugin module installation procedure 23
6 Power Supply, Grounding and Shielding 26
7 Battery 27
8 Special Instruction for Use 28
9 Getting Started 28
10 Unpacking and Packing Instructions 29
4
MANUGENEX7xx - Version 2.12
© 2018-2022 EXOR International S.p.A. - Subject to change without notice
Introduction
The operational guidelines described below is information which relates to the device, installation, transpor-
tation, storage, assembly, use and maintenance.
This Operating Instruction describes the main features of the Exor operator panels. The Manual refers to
the following models:
eX705 Operator interface with TFT color 5” widescreen display multitouch projected capacitive
touchscreen
eX707 Operator interface with TFT color 7” widescreen display multitouch projected capacitive
touchscreen
eX710 Operator interface with TFT color 10.1” widescreen display multitouch projected capacitive
touchscreen
eX712 Operator interface with TFT color 12.3” widescreen display multitouch projected capacitive
touchscreen
eX715 Operator interface with TFT color 15.6” widescreen display multitouch projected capacitive
touchscreen
eX721 Operator interface with TFT color 21.5” widescreen display multitouch projected capacitive
touchscreen
eX707G Operator interface with high-brightness TFT color 7” widescreen display multitouch projected
capacitive touchscreen
eX710G Operator interface with high-brightness TFT color 10.1” widescreen display multitouch projected
capacitive touchscreen
5
MANUGENEX7xx - Version 2.12
© 2018-2022 EXOR International S.p.A. - Subject to change without notice
Safety Guide
The manual contains safety standards that must be respected for the personal safety and to avoid damage.
Indications of attention are divided into three levels of severity:
DANGER: indicates a failure to observe safety rules and such failure may cause death or serious injuries.
ATTENTION: indicates a failure to observe safety rules and that deciency may cause damage.
CAUTION: indicates a failure to observe safety rules and that deciency may cause defects to the equipment
or inconsistencies.
CAUTION
ATTENTION
DANGER
!
!
6
MANUGENEX7xx - Version 2.12
© 2018-2022 EXOR International S.p.A. - Subject to change without notice
1 Product Overview
eX Series 700 HMI products combine state-of-the-art connectivity features and top performance in a great
design. Products have been designed as IoT edge devices with the combination of a powerful controller with
networking capability (up to 3 Ethernet networks) and outstanding communication options including client/
server OPC UA. They are the ideal choice for all demanding IoT edge applications in factory, marine and bu-
ilding automation.
The glass projected capacitive touchscreen and the brilliant displays with size up to 21.5” and resolution up to
1920x1080 guarantee great optical performance; with the support of multitouch gesture programming they
can create the most natural human interfaces.
eX700G Series combine high-performance sunlight-readable display with state-of-the-art connectivity features
and top performance in a great design maintaining as a design commitment the fact that the product is likely to
be used in environments where the safety of operators is at risk. The glass projected capacitive touchscreen
and the display are bonded to guarantee the highest optical performance and resistance in such environments.
• eX Series 700 products have been designed to run the JMobile software for powerful HMI applications.
• Gateway function with OPC UA Server and Client.
• Secure connectivity with JMcloud and full network separation.
• Powerful browser wih industry standard Web engines.
• Optional CODESYS V3 PLC runtime with choice of major I/O protocols.
• Optional plug-in modules for eldbus systems, I/O and controllers.
7
MANUGENEX7xx - Version 2.12
© 2018-2022 EXOR International S.p.A. - Subject to change without notice
The products have been designed for use in an industrial environment in compliance with the 2014/30/EU
EMC Directive.
The products have been designed in compliance with:
EN 61000-6-4 CISPR 22 Class A
CISPR 16-2-3
EN 61000-6-2 EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-11
EN 61000-4-29
EN60945
IECEx IECEx: IECEx ULD 17.0019X
IEC 60079-0 Ex ec IIC T5...T4 Gc -20°C≤Tamb≤+60°C or 0°C≤Tamb≤+50°C
IEC 60079-7 Ex tc IIIC T95°C Dc
IEC 60079-31
ATEX DEMKO 17 ATEX 1871X
EN 60079-0 II 3G Ex ec IIC T5...T4 Gc -20°C≤Tamb≤+60°C or 0°C≤Tamb≤+50°C
EN 60079-7+A1 II 3D Ex tc IIIC T95°C Dc
CENELEC 60079-31
The installation of these devices into the residential, commercial and light-industrial environments is allowed
only in the case that special in measures are taken in order to ensure conformity to EN 61000-6-3.
The products are in compliance with the Restrictions on Certain Hazardous Substances (RoHS) Directive
2011/65/EU
In compliance with the above regulations the products are CE marked.
Products described in this manual may have other approvals and certicates.
Please refer to product datasheets available at www.exorint.com
2 Standards and Approvals
8
MANUGENEX7xx - Version 2.12
© 2018-2022 EXOR International S.p.A. - Subject to change without notice
Product Identication
The product may be identied through a plate attached to the rear cover. You will have to know the type of
unit you are using for correct usage of the information contained in the guide.
An example of this plate is shown in the gure below:
Note: the eX707 label is used as an example for eX700 Series
product model name eX707
product part number EX707U5P1
year/week of production 1816
serial number AA00011FT000000561AA
version id of the product 120408A04002000
manufacturer address Exor International S.p.A.
Via Monte Fiorino 9
IT-37057 San Giovanni Lupatoto (VR)
ATEX Marking DEMKO 17 ATEX 1871X
II 3G Ex ec IIC T5...T4 Gc 0°C≤Tamb≤+50°C or -20°C≤Tamb≤+60°C
II 3D Ex tc IIIC T95°C Dc
IECEx Marking IECEx: IECEx ULD 17.0019X
Ex ec IIC T5...T4 Gc 0°C≤Tamb≤+50°C or -20°C≤Tamb≤+60°C
Ex tc IIIC T95°C Dc
2 Standards and Approvals
9
MANUGENEX7xx - Version 2.12
© 2018-2022 EXOR International S.p.A. - Subject to change without notice
3 Technical Specications
Electromagnetic Compatibility (EMC)
Radiated disturbance test Class A CISPR 22
CISPR 16-2-3
Electrostatic discharge immunity test 8 kV (air electrostatic discharge) EN 61000-4-2
4 kV (contact electrostatic discharge)
Radiated, radio-frequency, 80 MHz ÷ 1 GHz, 10V/m EN 61000-4-3
electromagnetic eld immunity test 1,4 GHz ÷ 2 GHz, 3 V/m
2 GHz ÷ 2.7 GHz, 1 V/m
Burst immunity test ± 2 KV dc power port EN 61000-4-4
± 1 KV signal line
Surge immunity test ± 0,5 KV dc power port (line to earth) EN 61000-4-5
± 0,5 KV dc power port (line to line)
± 1 KV signal line (line to earth)
Immunity to conducted disturbances
inducted by radiofrequency eld 0.15 ÷ 80 MHz, 10V EN 61000-4-6
Power frequency magnetic eld
immunity test Enclosure, 50/60Hz, 30A/m EN 61000-4-8
Environmental conditions
Operating temperature (surrounding -20 ÷ +60°C (vertical installation) EN 60068-2-14
air temperature) Plug-in modules and USB devices
may limit max temperature to +50°C
Storage temperature -20 ÷ +70°C EN 60068-2-1
EN 60068-2-2
EN 60068-2-14
Operating and storage humidity 5 ÷ 85 % RH not-condensing EN 60068-2-30
Vibrations 5 ÷ 9 Hz, 7 mm p-p EN 60068-2-6
9 ÷ 150 Hz, 1 g
Shock ± 50 g, 11 ms, 3 pulses per axis EN 60068-2-27
Protection class Front panel IP66, Rear IP20 EN 60529
Touchscreen technology Projected capacitive
Back-up battery 3V 50mAh Lithium, rechargeable, not user-replaceable,
model VL2330.
Fuse Automatic
Serial Port RS-232, RS-485, RS-422 software congurable
Flash 4GB for eX705, eX707, eX710, eX707G, eX710G,
8GB for eX712, eX715, eX721
RAM 512MB for eX705, 1GB for eX707, eX710, eX707G, eX710G,
2GB for eX712, eX715, eX721
Hardware clock Clock/Calendar with back-up battery
Accuracy RTC (at 25°C) <100ppm
10
MANUGENEX7xx - Version 2.12
© 2018-2022 EXOR International S.p.A. - Subject to change without notice
3 Technical Specications
Voltage dips, short interruptions and
voltage variations immunity test Port: AC mains; Level:
100% duration: 1 cycle and 250 cycles (50Hz);
1 cycle and 300 cycles (60Hz);
40% duration: 10 cycles (50Hz);
12 cycles (60Hz);
70% duration: 25 cycles (50Hz);
30 cycles (60Hz);
Phase: 0°-180°
Test executed on the 230Vac side of the Exor International S.p.A. Power Supply EN 61000-4-11
Port: DC mains; Level:
0% duration: 10ms 20 spaces by 1s
Test executed on the 24Vdc of the EUT EN 61000-4-29
Durability information
Backlight service life 40000 Hrs. or more
(LED type) (Time of continuous operation until the brightness of the
backlight reaches 50% of the rated value when the
surrounding air temperature is 25°C) - see Note 1
Note 1: Extended use in environments where the surrounding air temperature is 40°C or higher may
degrade backlight quality/reliability/durability.
Surface resistance
Chemical resistance of the front glass for an exposure time of 24 hours without visible changes:
• Betadine (10% Povidone Solution)
• Cola
• Electrode Gel/Paste
• Hydrogen Peroxide (3% Solution)
• NaCl (0.9% Solution)
• Coffee
• Dextrose (5% Glucose Solution)
• Hydrogen chloride (0.5% Solution PH=1)
• Isopropyl Alcohol
• Sodium Hypochlorit
• Ethyl Alcohol (70%-90%)
• Quaternary ammonium compound
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Exor Touch-Screen Handbücher
Exor
Exor UniOP eTOP 500 Series Bedienungsanleitung
Exor
Exor eTOP-MON Bedienungsanleitung
Exor
Exor eTOP 300 Series Bedienungsanleitung
Exor
Exor JSmart 710 Bedienungsanleitung
Exor
Exor eSMART107 Bedienungsanleitung
Exor
Exor JSmart700 Series Bedienungsanleitung
Exor
Exor eTOP605 Bedienungsanleitung
Exor
Exor JSmart705 Bedienungsanleitung
Exor
Exor eTOP605 Bedienungsanleitung
Exor
Exor JSmart700M Series Bedienungsanleitung
Beliebte Touch-Screen Handbücher anderer Marken
Elecro Engineering
Elecro Engineering Poolsmart Plus Montageanleitung
Johnson Controls
Johnson Controls IQ4 HUB Bedienungsanleitung
Elo TouchSystems
Elo TouchSystems ET2270L Bedienungsanleitung
Elo TouchSystems
Elo TouchSystems ET1002L Bedienungsanleitung
Elo TouchSystems
Elo TouchSystems 3201L Bedienungsanleitung
Duratec
Duratec S15 Bedienungsanleitung
