EXP Computer CD421 Bedienungsanleitung
PCMCIA
Portable CD-ROM
Installation Manual
CD-421
EXP COMPUTER, INC.
EXP MEMORY PRODUCTS.
NON-TRANSFERABLE LIMITED WARRANTY
EXP COMPUTER INC., AND EXP MEMORY PRODUCTS("EXP")
warrants that the Quadruple Speed Portable CD-ROM(“products”)
manufactured or distributed by EXP to be free from failures due to
defects in materials or workmanship for full one year from the date of
purchase of the products.
This warranty is void if the product is damaged by abnormal or improper
use or by accident, abuse or if any attempt to repair or modify the
product without authorization from EXP. Your sales receipt or invoice,
showing the date of purchase and the name of the authorized reseller, is
your proof of the date of purchase. During the warranty period, EXP will
at its option, replace or repair, at no charge, the product which in its
opinion is defective.
Before you return the failed products, contact EXP. You must obtain a
Return Merchandise Authorization (RMA) number by calling EXP
Computer Inc. At (516) 496-7629. The RMA number should be displayed
on the outside of the returned package and on the accompanying
packing list. EXP cannot be held responsible for any package returned
without the RMA number. You are responsible for packaging, providing
proof of the date of purchase and the shipping cost of the failed product
to EXP Computer, Inc. You are responsible for mailing the warranty
registration card. The warranty claims may not be honored if there is no
corresponding registration card on file at EXP.
IN NO EVENT WILL EXP BE LIABLE FOR ANY DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGE, INCLUDING
LOSS OF PROFIT, LOSS OF SAVINGS; OR ANY OTHER DAMAGES
CAUSED BY PRODUCT OR FAILURE OF THE PRODUCT TO
PERFORM.
THIS LIMITATION OF LIABILITY APPLIES EVEN IF EXP HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME
SATES DO NOT ALLOW THE EXCLUSION OR LIMITATION IN
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.
FCC COMPLIANCE STATEMENTS
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the Distance between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CHANGE OR MODIFICATIONS NOT EXPRESSLY APPROVED BY
PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
CAUTION
TRADEMARKS
SystemSoft is a registered trademark of SystemSoft Corporation.
CardSoft is a trademark of SystemSoft Corporation.
Phoenix is a registered trademark of Phoenix Technologies, Ltd.
Databook is a registered trademark of Databook Inc.
Cardtalk is a trademark of Databook Inc.
PCMCIA is a trademark of Personal Computer Memory Card
International Association.
MS-DOS, Windows, Windows 95, and MSCDEX are trademarks of
Microsoft Corporation.
OS/2 WARP is a trademark of International Business Machines
Corporation.
Photo CD is a trademark of Kodak.
CONTENTS
INTRODUCTION............................................................................... 1
SYSTEM REQUIREMENTS........................................................ 1
FEATURES ............................................................................... 1
PART NAMES AND FUNCTIONS ..................................................... 2
FRONT PANEL OF THE CD-ROM DRIVE.................................. 2
REAR PANEL OF THE CD-ROM DRIVE..................................... 3
POWER SOURCE ............................................................................ 4
CONNECT THE AC ADAPTER................................................... 4
INSTALLING THE BATTERIES................................................... 5
REMOVING THE BATTERIES.................................................... 6
NOTICE ............................................................................... 6
HARDWARE INSTALLATION ........................................................... 7
SOFTWARE INSTALLATION ........................................................... 8
SOFTWARE INSTALLATION FOR DOS/WINDOWS ................. 8
AUTOMATIC INSTALLATION............................................ 8
MANUAL INSTALLATION.................................................. 9
SOFTWARE INSTALLATION FOR WINDOWS 95..................... 11
USING CD-421 UNDER WINDOWS 95............................. 11
USING CD-421 TO INSTALL WINDOWS 95..................... 12
ENABLING 32-BIT CARD SUPPORT OF WINDOWS 95 .. 13
SOFTWARE INSTALLATION FOR OS/2 WARP ........................ 15
AUTOMATIC INSTALLATION ........................................... 15
MANUAL INSTALLATION.................................................. 16
ADDING PCMCIA SUPPORT............................................ 17
USING CD-421 TO INSTALL OS/2 WARP ........................ 19
TROUBLE SHOOTING...................................................................... 20
BASIC OPERATING PROCEDURES................................................ 22
PCMCIA(PC Card) SOFTWARE INFORMATION.............................. 23
POWER SAVING.............................................................................. 27
- -
1
INTRODUCTION
The CD-421 brings the latest in mobile computing technology to
notebook computer users with portability and convenience. The CD-421
is a 4X(quad-speed) CD-ROM drive compliant with the PCMCIA 2.1(PC
Card) standard. Featuring flexible power options, the CD-421 may
operate on either AC power or batteries. The CD-421 is designed for
both business and entertainment solutions.
SYSTEM REQUIREMENTS
1. Notebook or desktop computer with a PCMCIA 2.1 Type I, II or III
slot.
2. MS-DOS Version 6.0 or higher with MSCDEX.EXE (for
DOS/Windows users only) or Windows 95 or OS/2.
FEATURES
§ Complies with PCMCIA 2.1
Standard
§ MSCDEX compatible
§ Easy-to-install device driver
software
§ Ultra slim PCMCIA Card
85.6 x 54.0 x 3.3 mm (Type I)
§ CD-ROM Drive
Size: 164 x 250 x 50mm
Weight ≤1.35 Kg
§ PCMCIA power consumption:
+5V/300 mA (Standby),
+5V/500 mA (max.)
§ Power source: AC adapter or
batteries (1.5V AA size x 8)
§ Battery life ≥3 hours. (CD-ROM
continuous video play)
§ Windows 95 Ready
§ OS/2 Warp Ready
§ Quad-speed data transfer rate:
600 Kbytes/sec
§ Average access time: 235 ms
(1/3 stroke)
§ 128 Kbytes Memory Buffer
§ Data capacity: 553MB (Mode 1)
635 MB (Mode 2)
§ Motorized front tray loading
§ Supports CD-Audio, CD-XA,
CD-ROM mode 1 and 2,
Multi-session Photo CD
§ Audio function: Headphone
output jack with volume control,
Audio line-in jack
- -
2
PART NAMES AND FUNCTIONS
FRONT PANEL OF THE CD-ROM DRIVE
•• Disc Tray:
This disc tray is used to insert the compact disc.
‚‚ Load/Stop button:
• Press this button to load the disc tray.
• When playing an Audio CD, pressing this button will put it into the
stop state.
ƒƒ Power Indicator:
• This indicator will light with a green LED when the power is on.
• This LED will blink when battery power is low.
„„ Play/Skip: (for CD Audio operation only)
• If the drive is in the stop state, pressing this button will activate the
drive to start playing.
• If the drive is in play state, pressing this button will skip to the next
track.
…… Headphone Volume Control Knob:
This rotary knob is used to adjust the volume of the headphone jack.
†† Power On/Busy LED:
This LED will light with a green LED when power is on.
This LED will blink when the drive is accessing the disc.
‡‡ Headphone Jack:
3.5mm audio headphone jack.
- -
3
REAR PANEL OF THE CD-ROM DRIVE
•• Interface Connector:
This interface connector connects to the PCMCIA interface card.
‚‚ DC in Jack:
This jack connects to the AC adapter.
ƒƒ Line out Jack:
This jack outputs audio signal to an amplifier.
„„ DC Source Switch
This switch select DC power source for the CD-ROM drive.
There are two sources to choose from battery or AC adapter.
- -
4
POWER SOURCE
The CD-421 can be either powered by the AC adapter or by the batteries
as a flexible option. However, the AC adapter has a priority over the
battery in powering the CD-ROM. That means if you connect the AC
adapter, the CD-421 will operate on it regardless if the batteries are
installed.
The CD-421 will be turned on automatically when your computer is
powered on and the PCMCIA interface card is connected to the
computer and initialized. On the other hand, when you turn off your
computer or disconnect the PCMCIA interface card from your computer,
the CD-421 will be powered off automatically. Such convenient design
ensures that users will not waste the battery power if the CD-ROM is not
in use.
The POWER LED indicates the power state, it will always light up when
the power supply is in the normal condition. The LED will flash if the
power is insufficient caused by a malfunctioning AC adapter or if the
batteries are reaching the end their service life. In this case, remove
the old batteries and replace with new batteries, or check your AC
adapter to see if it is defective or improperly connected.
CONNECT THE AC ADAPTER
1. Connect the AC adapter plug to the DC IN jack at the rear panel of
the CD-ROM.
2. Attach the AC adapter to the AC power outlet.
CAUTION
Use only the AC adapter provided with this unit. Using the
incorrect AC adapter will result in permanent and unpredictable
damage to the CD-421.
- -
5
INSTALLING THE BATTERIES
The CD-421 requires eight AA size batteries (not included) for operation.
When using alkaline batteries, the battery life may last for more than 3
hours if the CD-421 is used in CD-ROM mode, it can be even longer
when the CD-421 is used in CD-Audio mode. You can also use NiCad
rechargeable battery’s which have a shorter service life. Both the
rechargeable battery and the re-charger are NOT provided with this unit.
To install the batteries, follow the instruction below:
1. Remove the disc from the CD-ROM.
2. Power off the CD-ROM by disconnecting the PCMCIA interface card
from your computer.
3. Turn over the CD-ROM drive and place horizontally.
4. Press and slide the battery lid in the direction of the arrow to remove
it. (As shown in Figure 3)
Figure 3
5. Install eight fresh AA batteries in the order as illustrated in Figure 4,
and make sure polarities are aligned properly. It is recommended that
you follow the order in the illustration to install the batteries with ease.
6. Please note that the battery ribbon must be arranged as shown in
Figure 4. Otherwise, it will be difficult to remove the batteries.
7. Replace the battery lid.
Inhaltsverzeichnis
Andere EXP Computer CD/CDR-Laufwerk Handbücher
EXP Computer
EXP Computer CDG-821 Bedienungsanleitung
EXP Computer
EXP Computer CD-940E Bedienungsanleitung
EXP Computer
EXP Computer Portable CD-ROM Bedienungsanleitung
EXP Computer
EXP Computer CD Station Bedienungsanleitung
EXP Computer
EXP Computer PD TRAVELER Bedienungsanleitung
EXP Computer
EXP Computer CRW-740 Bedienungsanleitung
EXP Computer
EXP Computer CD Traveler Bedienungsanleitung
EXP Computer
EXP Computer CDS-940 Bedienungsanleitung
EXP Computer
EXP Computer CD ReWriter CRW-726 Bedienungsanleitung
Beliebte CD/CDR-Laufwerk Handbücher anderer Marken
SmartDisk
SmartDisk Firewire CD-R/W Bedienungsanleitung
Axis
Axis CD-ROM SERVER Bedienungsanleitung
LG
LG CRD-8322B Bedienungsanleitung
Memorex
Memorex 32023234 - 52x32x52x External USB2.0 CD... Montageanleitung
Yamaha
Yamaha CD Recordable/Rewritable Drive CRW3200 Bedienungsanleitung
Sony
Sony CRX230AE Bedienungsanleitung
