Explore Scientific RDC1005 Bedienungsanleitung

EN INSTRUCTION MANUAL...............2

IT ISTRUZIONI PER L’USO.............. 14

DE BEDIENUNGSANLEITUNG .......... 26

FR MODE D‘EMPLOI ....................... 38

ES MANUAL DE INSTRUCCIONES .... 50

*Radio-controlled clock function not available in all territories. / Funzione di orologio radiocontrollati non disponibile in ogni territorio. / Funkuhrfunktion nicht in jedem Gebiet verfügbar. / La fonction

d‘horloge radio-piloté n‘est pas disponible dans tous les territoires. / La función de reloj radiocontrolado no está disponible en todos los territorios./De radiogestuurde klokfunctie is niet beschikbaar

in alle gebieden.

RADIO-CONTROLLED* ALARM CLOCK

SVEGLIA RADIOCONTROLLATA*

FUNKWECKER*

RÉVEIL RADIO-COMMANDÉ*

DESPERTADOR RADIO-CONTROLADO*

COMPACTE RADIOGESTUURDE* WEKKER

Art.No.: RDC1005

NL MANUEEL INSTRUCTIE 62

.............

ABOUT THIS INSTRUCTION

MANUAL

These operating instructions are to be

considered a component of the device.

Please read the safety instructions and the

operating instructions carefully before use.

Keep these instructions for renewed use at a

later date. When the device is sold or given to

someone else, the instruction manual must be

provided to the new owner/user of the product.

The device is intended only for indoor use.

GENERAL WARNINGS

•Risk of electric shock — This device

contains electronic components that

operate via a power source (batteries).

Children should only use the device under

adult supervision. Only use the device as

described in the manual; otherwise, you

run the risk of an electric shock.

• Choking hazard —Children should only

use the device under adult supervision.

Keep packaging material, like plastic bags

and rubber bands, out of the reach of

children, as these materials pose a choking

hazard.

• Risk of chemical burn —Keep batteries

out of the reach of children! Make sure you

insert the batteries correctly. Leaking

battery acid can lead to chemical burns. Avoid

contact of battery acid with skin, eyes and

mucous membranes. In the event of con-

tact, rinse the affected region immediately

with a plenty of water and seek medical

attention.

• — Do not expose the

device to high temperatures. Use only the

recommended batteries. Do not short-

circuit the device or batteries, or throw them

an explosion.

• Do not disassemble the device. In the

event of a defect, please contact your

dealer. The dealer will contact the Service

Centre and can send the device in to be

repaired, if necessary.

• Use only the recommended batteries.

Always replace weak or empty batteries with

a new, complete set of batteries at full

capacity. Do not use batteries from different

brands or with different capacities. The

batteries should be removed from the unit

if it has not been used for a long time.

SCOPE OF DELIVERY

Alarm clock, Operating instructions, 2x AAA

Batteries

BEFORE YOU BEGIN

• We recommend using alkaline batteries. If

temperatures regularly fall below 0°C (32°F),

we recommend using lithium batteries.

• Avoid using rechargeable batteries.

(Rechargeable batteries cannot maintain

correct power requirements.)

the polarity in the battery compartment. 2x

AAA Batteries are required.

handling

PRODUCT OVERVIEW

1. Press [ ] to activate the snooze

function and backlight.

2. In date mode, press [ ] to turn

on/off zone. In alarm time mode,

press to turn on/off alarm. Press and

hold to enter time and date setting.

3. Press [ ] to show alarm time of

Alarm 1-5 and Alarm 6-7. Press and

hold to enter alarm setting.

4. Press [ ]

to switch between temperature

and weekday display. Press and

hold to start RCC signal receiving.

In setting mode, press to increase one

unit, press and hold to increase

rapidly.

2345

5. Press [ ] to switch between date

mode and the nearest coming alarm

time. In setting mode, press to

decrease one unit, press and hold to

decrease rapidly.

6. Battery compartment. Slide down to

open.

LCD DISPLAY

1. Time display

2. Date display or Alarm time display

(Press [ ] to switch)

3. Temperature display or weekday display

(Press [ ] to switch)

[ ] RCC signal received

[ ] Alarm ON

[ ] DST ON

[ ] Snooze activated

[ ] Low battery indicator

[ ] Temperature mode

GETTING STARTED

INSERT BATTERIES

1. Remove the battery door from the back.

2. Insert 2x AAA (LR03)/1.5V batteries. Please

ensure the polarities (+/-) of the batteries

match upon installation.

3. Reattach the battery door.

NOTE: Replace batteries when [ ] displays,

or when the display is dim.

CLOCK

CLOCK RECEPTION

1. Replace batteries or press [ ] button

will initiate RCC receiving.

2. RCC receiving can work in both date mode

and alarm mode.

3. The receiving process duration is 7 minutes.

4. During receiving process, the RCC signal

symbol [

5. If the RCC receiving process is successful, a

completed RCC symbol [ ] will be shown

in the display and the date and time will be

set automatically. If it fails within 7 minutes,

RCC setting will quit automatically. If that

happens, press [ ] button to re-initiate

RCC receiving.

6. RCC receiving will automatically start at 2:03,

3:03, 4:03, 5:03 every night. Auto receiving

function will cease if it is successful.

7. To stop RCC reception, press the [ ]

button.

8. If the device is still not receiving the signal,

please proceed to set the time manually.

SET THE CLOCK MANUALLY

1. Press and hold [ ] button to enter

time and date setting.

2. The setting parameter will flash.

3. Sequence of setting: Weekday Language

12/24 Hr Year (2000 – 2099) Date

format Month Date Hour Minute

Zone °C/°F exit

4. Press [ ] button once, the figure will

increase 1 unit (when setting minute, second

will reset to 0). Press and hold the [ ]

button, the figures will increase rapidly.

5. Press [ ] button once, the figure will

decrease 1 unit (when setting minute, second

will reset to 0). Press and hold the [ ]

button, the figures will decrease rapidly.

6. Press [ ] button to confirm setting

and enter to next parameter.

7. If there is no action in 20 seconds, the setting

will be saved and will exit the setting mode.

LANGUAGE

Sequence of setting weekday language:

German (GER) English (ENG) French

(FRE) Italian (ITA) Dutch (DUT).

TIME ZONE SETTING

To set a different time zone, proceed as

follows:

1. Press and hold [ ] button, enter time

and date setting.

2. Press [ ] button several times until

the display shows the time offset “Zone 00”

3. Press the [ ] button to increase or

[ ] button to decrease the Time zone

offset.

°C/°F SETTING

1. Press and hold [ ] button, enter time

and date setting.

2. Press [ ] button several times until

the display shows °C/°F.

3. Press the [ ] or [ ] button to switch

Celsius (°C) / Fahrenheit (°F).

ALARM

SETTING/ADJUSTING DUAL ALARM TIME

You can set one alarm time for weekdays,

(Monday to Friday / 1-5) and one alarm time

for the weekend (Saturday to Sunday / 6-7).

Alarm 1 = Weekday alarm (1-5)

Alarm 2 = Weekend alarm (6-7)

1. Press and hold [ ] button, enter alarm

setting.

2. Sequence of setting: Alarm 1 (1-5) weekday

hour weekday minute Alarm 2 (6-7)

weekend hour weekend minute exit

3. During setting, the setting parameter will

flash.

4. Press [ ] button once to increase by 1

or press [ ] once to decrease by 1.

Alternatively press and hold the [ ] button to

change the figures rapidly.

5. Press [ ] button to confirm setting and

enter to next parameter.

6. Press [ ] button to turn on/off alarm.

7. A

finished and turned on.

larm will sound when the alarm setting is

If there is no action in 20 seconds, the setting

will be saved and will exit the setting

mode.

TURN ON/OFF ALARM

1. Press the [ ] button once to turn on/

off the alarm that is nearest in time. (1-5) or

activated.

How activate alarm times individually:

2. Press [ ] button once to switch to alarm

mode. Monday to Friday alarm time will be

3. Press [ ] button once to turn on/off

Monday to Friday alarm.

4. Press [ ] button again to show Saturday

Press [ ] once to turn on/off Saturday

to Sunday alarm.

OPERATION

1. At the set time, alarm signal rings.

During the alarm, press the [ ] button

to delay the alarm by 8 minutes.

3. If you do not press any button to stop the

alarm, it will automatically turn off after 5

minutes.

4. To stop the alarm, press the [ ] or any

other button.

5. The alarm will start again at the next alarm

time, unless you switch off the alarm function

by pressing the [ ] button.

SPECIFICATIONS

Dimensions (Main unit):

72 x 25 x 75 mm (L x W x H)

Weight (Main unit):

73g (Exclude batteries)

Temperature display range:

-10°C to +50°C (14°F to 122°F)

Power:

2x AAA (LR03) 1.5V batteries

Inhaltsverzeichnis

Sprachen:

Andere Explore Scientific Wecker Handbücher

Explore Scientific

Explore Scientific RDC1000 Bedienungsanleitung

Explore Scientific

Explore Scientific RPW3008 Bedienungsanleitung

Explore Scientific

Explore Scientific RDP1001-CM3000 Bedienungsanleitung

Explore Scientific

Explore Scientific RDP1003-CM3000 Bedienungsanleitung

Explore Scientific

Explore Scientific RDP1001 Bedienungsanleitung

Explore Scientific

Explore Scientific RDC3006 Bedienungsanleitung

Explore Scientific

Explore Scientific RDP3007-CM3000 Bedienungsanleitung

Explore Scientific

Explore Scientific RDP1002 Bedienungsanleitung

Explore Scientific

Explore Scientific RDC1005-CM3000 Bedienungsanleitung

Explore Scientific

Explore Scientific RDC1004-CM3000 Bedienungsanleitung

Explore Scientific

Explore Scientific RDC3006-CM3000 Bedienungsanleitung

Explore Scientific

Explore Scientific RDP3007 Bedienungsanleitung

Explore Scientific

Explore Scientific NDC1004 Bedienungsanleitung

Explore Scientific

Explore Scientific RDC8001 Bedienungsanleitung

Explore Scientific

Explore Scientific RDC1008 Bedienungsanleitung

Explore Scientific

Explore Scientific RPW3008 Bedienungsanleitung

Explore Scientific

Explore Scientific RPW3008-CM3000 Bedienungsanleitung

Explore Scientific

Explore Scientific BCR2001 Bedienungsanleitung

Beliebte Wecker Handbücher anderer Marken

Steren

Steren CLK-210 Bedienungsanleitung

COP-USA

COP-USA ALCDVR32-SL Bedienungsanleitung

Philips

Philips HF3505/70 Technisches Handbuch

Casio

Casio PQ-70 Bedienungsanleitung

iHome

iHome IA63 Bedienungsanleitung

Coopers

Coopers 9765 Bedienungsanleitung

ANJANK

ANJANK AC-190 Leitfaden

TFA

TFA 98.1075 Bedienungsanleitung

Sharper Image

Sharper Image 204050 Bedienungsanleitung

Lumie

Lumie Zest Bedienungsanleitung

Dexford

Dexford RCT200 Bedienungsanleitung

Philips

Philips AJL303/37B Bedienungsanleitung

RST

RST Q754 Bedienungsanleitung

iHome

iHome iKT50 Bedienungsanleitung

Sony

Sony dash HID-B7 Bedienungsanleitung

SVINZ

SVINZ SCC009 Bedienungsanleitung

Clas Ohlson

Clas Ohlson 918863 Bedienungsanleitung

IKEA

IKEA FNURRA Bedienungsanleitung