Exsys EX-6010 Bedienungsanleitung
RS-232/422/485/DIO to Ethernet Data Gateway
i
Contents
1. Introduction ........................................................1
1.1
Features .............................................................................. 1
1.2
Product Specifications ...................................................... 1
2. Package Check List ...........................................4
3. Panel Layout .......................................................5
3.1
Connector Layout .............................................................. 5
3.2
Front Panel Layout .............................................................
3.2.1
RS-232 Pin Assign ents and Cable Wiring ..............6
3.2.2
Digital I/O Control Pins (5V TTL Level) .......................7
3.2.3
RS-422/485 Pin Assign ents ........................................7
3.2.4
DIP Switch Settings .......................................................8
3.3
Rear Panel Layout .............................................................. 8
3.3.1
Input Power Connectors .............................................9
3.3.2
LED Indicators ...............................................................9
4. Configuring the Data Gateway ........................10
4.1
Em Manager Program ....................................................... 10
4.2
Web Browser Console Configuration ............................... 12
4.2.1
Entering the web Browser Console ...........................12
4.2.2
Updating Configuration ..............................................14
5. Diagnosing the Data Gateway .........................18
RS-232/422/485/DIO to Ethernet Data Gateway
ii
5.1
Entering Setup .................................................................... 18
5.2
Digital I/O............................................................................ 20
. Troubleshooting ..................................................23
.1
The em.exe cannot find the unit: ..................................... 23
.2
How to Restore the unit to its default Settings: ................ 25
RS-232/422/485/DIO to Ethernet Data Gateway
1
1. Introduction
Thank you for purchasing this RS-232/422/485/DIO to Ethernet Data
Gateway. It allows you to control RS-232, RS-422, RS-485 and Digital
Input/Output devices over a TCP/IP-based Ethernet. It provides TCP
Server Mode, TCP Client Mode and UDP Modes that co patible with
the standard network API (Winsock or BSD Sockets). It provides a web
browser console to change its settings by Internet Browser easily.
1.1 Features
Provides one RS232/422/485 Port over LAN
Provides 7 Digital I/O Lines over LAN
Allows to Reset the Hardware fro External
Supports 4-wire RS-422/485 and 2-wire RS-485 applications
300bps to 115.2Kbps Serial Port Baud Rate
Built-in 15KV ESD Protection for ALL Signals
Provides TCP Server, TCP Client, and UDP Modes
Provides one 10/100Mbps, RJ45 LAN Port
Provides +12V DC fro DC Jack or Ter inal Blocks
1.2 Product Specifications
Type Specifications
LAN
Connector
Speed
10/100Mbps Ethernet
RJ45
10/100Mbps
RS-232/422/485/DIO to Ethernet Data Gateway
2
RS-232/422/485
No. of Ports
Interface
Connector
Serial and LAN and
Digital I/O Line
Protection
Watch Dog Ti er
Parity
Data bits
Stop bit
Speed
Power Requirements
Power Input
Power Consu ption
1 (RS-232 and RS-422/485 are shared
port, only one of the can be used
si ultaneously)
4-wire RS-422: TxD+/-, RxD+/-
4-wire RS-495: TxD+/-, RxD+/-
2-wire RS-485: Data+/-
RS-232 signals:
TXD,RXD,RTS,CTS,DTR,DSR,DCD,GND
Ter inal Block (RS-422/485)
DB9 ale (RS-232)
15KV
Built-in
None, Odd, Even
7, 8
1, 2
300 to 115.2Kbps
12V DC (via DC Jack), or
12V DC (via Ter inal Block)
110 A @ 12V DC
RS-232/422/485/DIO to Ethernet Data Gateway
3
Mechanical
Specifications
Material
Gross Weight
Environmental
Operating Te perature
Storage Te perature
Operating Hu idity
Metal
38065g (0.84 lb)
0 to 558C (32 to 1318F)
-20 to 858C (-4 to 1858F)
5 to 95% RH
RS-232/422/485/DIO to Ethernet Data Gateway
4
2. Package Check List
Before installing the product, please ake sure the following
accessories are well packed in the box：
□ RS-232/422/485/DIO to Ethernet Data Gateway x 1
□ Optional 12V DC, 1.5A AC Adapter x 1
□ Installation Guide × 1
（Mark the check box to help you check it）
RS-232/422/485/DIO to Ethernet Data Gateway
5
3. Panel Layout
3.1 Connector Layout
Power LED
12 VDC
Power Input
DC Jack
RJ-45 LAN
Connector
RS-232/422
/485 LEDs
LAN LEDs
+12V DC
Aux Power
Input
RS-232
connector(
DB9)
Digital I/O
Pins
Reset Input
(Active
Low)
RS-422/485
connectors
DIP Switch
for
RS-485/422
mode
settings
and
Terminator
Enable/
Disable
RS-232
DIO1
DIO2
DIO3
DIO4
DIO5
DIO
DIO7
RST IN-
GND
TXD+
TXD-
RXD+(485)
RXD-(485)
485/422
N/A
RXD TERM EN
TXD TERM EN
PWR
+12V DC IN
10/100M
Ethernet
TX/RX
LINK/SYS
GND
+12V DC IN
RS-232/485/422/DIO
to Ethernet Data Gateway
+
-
RS-232/422/485/DIO to Ethernet Data Gateway
6
3.2 Front Panel Layout
3.2.1 RS-232 Pin Assignments and Cable Wiring
DB9(Male) to DB9(Male) Wiring
1 5
RS-232 DIO1~DIO7, Reset RS-422 DIP Switch
Connector RS-485
9
9 Pins Signal
1 DCD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 NC
DB9(Gateway) DB9(Serial Device)
1 DCD 1 DCD
2 RXD 2 RXD
3 TXD 3 TXD
4 DTR 4 DTR
5 GND 5 GND
6 DSR 6 DSR
7 RTS 7 RTS
8 CTS 8 CTS
RS-232/422/485/DIO to Ethernet Data Gateway
7
3.2.2 Digital I/O Control Pins (5V TTL Level)
Digital I/O DC Characteristics
Parameter Min Max Unit Test Conditions
Input Low Voltage 0 0.8 V Vdd=4.5V
Input High Voltage 2.4 Vdd+0.2 V VDD=5.5V
Output Low Voltage - 0.45 V Vdd=4.5V Iol=+1.6mA
Sink Current 1.6 - mA Vdd=4.5V Vin=0.45V
Output High Voltage 2.4 - V Vdd=4.5V Ioh=-60uA
Source Current -10 -60 uA Vdd=4.5V Vin=2.4V
3.2.3 RS-422/485 Pin Assignments
DIO1
DIO2
DIO3
DIO4
DIO5
DIO
DIO7
RST IN-
GND
Digital I/O Pin 1
Digital I/O Pin 2
Digital I/O Pin 3
Digital I/O Pin 4
Digital I/O Pin 5
Digital I/O Pin
Digital I/O Pin 7
RESET INUPT
GND
DIO
DIO7
RST IN-
GND
TXD+
TXD-
RXD+(485)
RXD-(485)
TXD+
TXD-
RXD+(DATA+)
RXD
-
(DATA
-
)
RS-232/422/485/DIO to Ethernet Data Gateway
8
3.2.4 DIP Switch Settings
This DIP switch on the front panel is used to set RS-485 or RS-422 odes,
enable and disable the ter ination resistors on the TxD+/TxD- and
RxD+/RxD- wires.
DIP Switch No. DIP Switch Settings Mode and Termination
Resistor Setting
1 On (default) 2-wire RS-485 ode
Off 4-wire RS-422/485
2 Not Used (default is
On)
Not Used
3 On (default) RxD Ter ination Resistor
Enabled
Off RxD Ter ination Resistor
Disabled
4 On (default) TxD Ter ination Resistor
Enabled
Off TxD Ter ination Disabled
3.3 Rear Panel Layout
1 2 3 4
ON
Aux Power LEDs RJ-
45 Power LED
Input LAN
DC Jack for
Power Input
Inhaltsverzeichnis
Beliebte Tor Handbücher anderer Marken
LST
LST M500RFE-AS Bedienungsanleitung
Kinnex
Kinnex Media Gateway Bedienungsanleitung
2N Telekomunikace
2N Telekomunikace 2N StarGate Bedienungsanleitung
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung
Telsey
Telsey CPVA 500 - SIP Bedienungsanleitung
