4
365535-en-GB_V1.2 1/15
This is only a brief description of these buttons. Detailed uses of the buttons are different in particular functions and will be
described later in the instructions.
Pressing [MODE] button will toggle among the modes above. Note that there is no auto-return function in the stopwatch. Whenever
you change modes, the stopwatch will remain in that mode until the [MODE] button is pressed again
Each time you enter a mode, a message will be displayed for a second before you enter the mode:
Note:- In the following descriptions, items printed in dark gray stand for flashing digits.
NormalTime Mode
The starting point for operating your stopwatch is NORMALTIME. If NORMALTIME is not displayed, press [Mode] until it is.
Year:- 2001
Date : - January 1
Dayof week:- Monday Time: -
12:00 am
The display format is as below :-
During clock display, press [START] to switch between 12Hr and 24Hr display mode. To toggle chime ON or OFF, you can press
[RESET]. The bell icon will be ON and OFF correspondingly.
Normal Time Setting
Press and hold [RECALL] for 2 seconds to enter setting mode. The normal time setting starts with second. The second digits will
then be flashing.You can change the flashing digit by pressing [START] button. To speed up the setting you can press and hold
[START] for longer than 2 seconds to activate fast setting. To select other digits, press [RESET] button. The setting order is:
Second, Minute, Hour, Year, Month, Date, month-date (m-d)
year
day, month - date
hr: min second
2001
WE 1-3
A 10:35’30
