Extron electronics HAI 100 4K Plus Bedienungsanleitung

HAI 100 4K Plus •Setup Guide

The Extron HAI 100 4K Plus is an audio embedder that embeds either two-channel analog audio, or two-channel or multi-channel

S/PDIF digital audio onto the HDMI output signal. The HAI 100 4K Plus includes an HDMI input, analog stereo audio and S/PDIF

audio inputs, as well as an HDMI output.

Mounting

The HAI 100 4K Plus can be placed on a desktop or tabletop using the included rubber feet, or mounted to a rack or furniture (see

the HAI 100 4K Plus User Guide, available at www.extron.com, for mounting options and instructions).

Cabling

Rear Panel Features and Cabling

CONFIG

HAI 100 4K PLUSE

SIGNAL

HDCP

IN OUT

POWER

12V

0.4A MAX

OUTPUT AUDIO INPUTSINPUT

HAI 100 4K PLUS

S/PDIFANALOG

AA BB CC BB EE

AA DD

Figure 1. HAI 100 4K Plus Rear Panel

APower input — Connect the provided power supply to the 3.5 mm, 2-pole captive

screw power receptacle (see the image at right).

ATTENTION:

• Do not connect the power supply before reading the Attention in the

Power Supply section of the HAI 100 4K Plus User Guide.

• Ne branchez pas la source d’alimentation externes avant d’avoir lu les

mises en garde dans la section «PowerSupply» du HAI 100 4K Plus

User Guide.

BHDMI input — Connect an HDMI input source into this female HDMI type A connector.

NOTE: By default, the EDID stored at the HDMI input is set to 1080p at 60 Hz with 2-channel audio. EDID can be

congured using Extron PCS software (see Configuration on the next page).

CHDMI output — Connect an HDMI output device into this female HDMI type A connector.

DAnalog audio input — Connect an analog audio device to this 5-pole 3.5 mm captive screw connector (see figure 2). This

connector accepts 2-channel stereo balanced or unbalanced audio.

NOTE: By default, the HAI 100 4K Plus is congured to always embed analog audio. This can be congured using

Extron PCS software or SIS commands (see Configuration on the next page).

Do not tin the wi

res!

Balanced Audio Input

Tip

Ring

Tip

Ring

Sleeves

Unbalanced Audio Input

Tip

No Ground Here

Tip

Sleeves

Figure 2. Analog Input Connector Wiring

ATTENTION:

• Connect the sleeve to the ground (Gnd) terminal. Connecting the sleeve to a negative (-) terminal will damage the

audio output circuits.

• Connectez le manchon à la terminaison terre (Gnd). Connecter le manchon à une terminaison négative (-)

endommagera les circuits de la sortie audio.

SECTION A–A

Power Supply

Output Cord

Captive Screw

Connector

Ridges

Smooth

3/16"

(5 mm) Max.

APower input DAnalog audio input

BHDMI input ES/PDIF audio input (see the next page)

CHDMI output

68-3110-50

Rev. A

03 20

All trademarks mentioned are the property of their respective owners.

Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876

For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the

Extron Safety and Regulatory Compliance Guide on the Extron website.

ES/PDIF audio input — Connect a S/PDIF audio output device into this female RCA connector. This connector accepts

digital S/PDIF audio formats (2-channel LPCM, Dolby Digital, or DTS).

NOTE: The HAI 100 4K Plus can be congured to embed S/PDIF audio using Extron PCS Software or SIS

commands (see “Conguration” below).

Front Panel Features and Cabling

CONFIG

HAI 100 4K PLUSE

SIGNAL

HDCP

IN OUT

POWER

12V

0.4A MAX

OUTPUT AUDIO INPUTSINPUT

HAI 100 4K PLUS

S/PDIFANALOG

BB EE

AA DD

Figure 3. HAI 100 4K Plus Front Panel

APower LED — The LED indicator lights when the unit is receiving power.

BConfig port — Connect a control PC to this female Mini-B USB Cong port to update the rmware, congure various

functions of the unit, and view the current status of the unit.

CInput and Output LEDs — These four LEDs provide the status of the HDMI input and output:

• Signal — Input LED lights when the unit is receiving a signal on the HDMI input.

Output LED lights when a sink device is connected to the HDMI output.

• HDCP — Input LED lights when the input signal is HDCP encrypted.

Output LED lights when an HDCP compliant sink device is detected and the output is encrypted.

Conﬁguration

Several HAI 100 4K Plus features can be congured using Extron PCS software or SIS commands:

• Extron Product Conﬁguration Software (PCS): To congure the unit using PCS, download the software from

www.extron.com (see the HAI 100 4K Plus User Guide for details).

• Simple Instruction Set™ (SIS) commands: SIS commands can be sent from a PC to the HAI 100 4K Plus using Extron

DataViewer or other command interface (see the “SIS Commands” section of the HAI 100 4K Plus User Guide).

Andere Handbücher für HAI 100 4K Plus

Inhaltsverzeichnis

Andere Extron electronics Aufnahmegeräte Handbücher

Extron electronics

Extron electronics SSP 7.1 Bedienungsanleitung

Extron electronics

Extron electronics RGB 160xi Bedienungsanleitung

Extron electronics

Extron electronics TLI Pro 101 Bedienungsanleitung

Extron electronics

Extron electronics SSP 200 Bedienungsanleitung

Extron electronics

Extron electronics MLA-VC10 Bedienungsanleitung

Extron electronics

Extron electronics RGB 580x Bedienungsanleitung

Extron electronics

Extron electronics RGB 460xi FSR Series Bedienungsanleitung

Extron electronics

Extron electronics RGB 203 Rxi VTG Bedienungsanleitung

Extron electronics

Extron electronics DVI-RGB 150 Bedienungsanleitung

Extron electronics

Extron electronics Converter CVC 200 Bedienungsanleitung

Extron electronics

Extron electronics Universal Interfaces RGB 130xi Bedienungsanleitung

Extron electronics

Extron electronics RGB 560 AKM Bedienungsanleitung

Extron electronics

Extron electronics RGB 190FV Bedienungsanleitung

Extron electronics

Extron electronics SSP 7.1 Bedienungsanleitung

Extron electronics

Extron electronics NetPA AT Series Bedienungsanleitung

Extron electronics

Extron electronics RGB 472xi Bedienungsanleitung

Extron electronics

Extron electronics DVI-RGB 150 Bedienungsanleitung

Extron electronics

Extron electronics RGB 124 Bedienungsanleitung

Extron electronics

Extron electronics RGB 190FM Bedienungsanleitung

Extron electronics

Extron electronics RGB 400 Series Bedienungsanleitung

Extron electronics

Extron electronics RGB 580xi AAP Bedienungsanleitung

Extron electronics

Extron electronics EBP 108 RAAP Button Panel Bedienungsanleitung

Extron electronics

Extron electronics StudioStation 100 Bedienungsanleitung

Extron electronics

Extron electronics IP LINK IPL T SFI244 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch