Extron electronics UCS 303 Bedienungsanleitung

User Guide

UCS 303

Three Input, One Output Collaboration Switcher

68‑3538‑01 Rev. A

12 23

DVI/HDMI/USB Switchers

Safety Instructions

Safety Instructions • English

WARNING: This symbol, , when used on the product, is intended to

alert the user of the presence of uninsulated dangerous voltage within

the product’s enclosure that may present a risk of electric shock.

ATTENTION: This symbol, , when used on the product, is intended

to alert the user of important operating and maintenance (servicing)

instructions in the literature provided with the equipment.

For information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the Extron Safety and

Regulatory Compliance Guide, part number 68‑290‑01, on the Extron website,

www.extron.com.

www.extron.com



Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

The following registered trademarks (®), registered service marks (SM), and trademarks (TM) are the property of RGBSystems, Inc. or Extron (see the

current list of trademarks on the Terms of Use page at www.extron.com):

Registered Trademarks (®)

Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, eLink, Flat Field, FlexOS, Glitch Free, GlobalConfigurator,

GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink, MediaPort, NAV,

NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, ShareLink, Show Me, SoundField, SpeedMount, SpeedSwitch, StudioStation,

SystemINTEGRATOR, TeamWork, TouchLink, V‑Lock, VN‑Matrix, VoiceLift, WallVault, WindoWall, XPA, XTP, XTPSystems, and ZipClip

Registered Service Mark(SM) : S3 Service Support Solutions

Trademarks (™)

AAP, AFL (Accu‑RATEFrameLock), ADSP(Advanced Digital Sync Processing), AVEdge, CableCover, CDRS(ClassD Ripple Suppression),

CodecConnect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator, DSPConfigurator, DSVP(Digital

Sync Validation Processing), EQIP, Everlast, FastBite, Flex55, FOX, FOXBOX, IP Intercom HelpDesk, MAAP, MicroDigital, Opti‑Torque,

PendantConnect, ProDSP, QS‑FPC(QuickSwitch Front Panel Controller), RoomAgent, Scope‑Trigger, SIS, SimpleInstructionSet, Skew‑Free,

SpeedNav, Triple‑Action Switching, True4K, True8K, Vector™ 4K, WebShare, XTRA, and ZipCaddy

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause interference. This interference must be corrected at the expense of the user.

NOTES:

• This unit was tested with shielded I/O cables on the peripheral devices. Shielded

cables must be used to ensure compliance with FCC emissions limits.

• For more information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics see the Extron Safety and

Regulatory Compliance Guide on the Extron website.

VCCI-A Notice

この装置は、クラスＡ情報技術装置です。この装置を家庭環境で使用すると、電波妨害を引き

起こすことがあります。その場合には使用者が適切な対策を講ずるよう要求されることがあります。

ＶＣＣI－Ａ

Battery Notice

This product contains a battery. Do not open the unit to replace the battery. If the

battery needs replacing, return the entire unit to Extron (for the correct address, see the

Extron Warranty section on the last page of this guide).

CAUTION: Risk of explosion. Do not replace the battery with an incorrect type. Dispose

of used batteries according to the instructions.

ATTENTION : Risque d’explosion. Ne pas remplacer la pile par le mauvais type de

pile. Débarrassez-vous des piles usagées selon le mode d’emploi.

Conventions Used in this Guide

Notifications

The following notifications are used in this guide:

CAUTION: Risk of minor personal injury.

ATTENTION : Risque de blessuremineure.

ATTENTION:

• Risk of property damage.

• Risque de dommages matériels.

NOTE: A note draws attention to important information.

Software Commands

Commands are written in the fonts shown here:

^AR Merge Scene,,0p1 scene 1,1 ^B 51 ^W^C.0

[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]

EX! *X1&*X2)*X2#*X2! CE}

NOTE: For commands and examples of computer or device responses used in this

guide, the character “0” is used for the number zero and “O” is the capital letter

“o.”

Computer responses and directory paths that do not have variables are written in the font

shown here:

Reply from 208.132.180.48: bytes=32 times=2ms TTL=32

C:\Program Files\Extron

Variables are written in slanted form as shown here:

ping

xxx.xxx.xxx.xxx

—t

SOH R

Data

STX

Command

ETB ETX

Selectable items, such as menu names, menu options, buttons, tabs, and field names are

written in the font shown here:

From the File menu, select New.

Click the OK button.

Specifications Availability

Product specifications are available on the Extron website, www.extron.com.

Extron Glossary of Terms

A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.

viUCS 303 • Contents

Contents

Introduction ................................................ 1

About this Guide.................................................. 1

About the UCS 303 Switcher............................... 1

Features .............................................................. 2

USB System Architecture .................................... 3

Application Diagrams........................................... 5

Installation.................................................. 7

Installation Overview ............................................ 7

Rear Panel Connections ...................................... 8

Wiring the CONTACT/TALLY Connectors........... 10

Connecting Using an SM Cable..................... 12

LockIt HDMI Cable Lacing Bracket Installation... 13

Wiring the LAN Port........................................... 14

Connecting Multiple UCS 303 Switchers in a

System............................................................. 15

Operation.................................................. 16

Front Panel Features.......................................... 16

Powering on the Switcher.................................. 18

Selecting an Input.............................................. 18

Auto-switching .................................................. 18

Auto-switch Modes ....................................... 19

Auto-switch Type .......................................... 19

Resetting........................................................... 19

Front Panel Lock Mode (Executive Mode).......... 20

EDID Minder...................................................... 20

HDCP................................................................ 21

Inputs ............................................................ 21

Output........................................................... 21

HDCP Authorized Setting .............................. 21

HDCP Encryption .......................................... 22

HDCP Notification.......................................... 22

Color Bit Depth.................................................. 22

USB-C Input...................................................... 22

DisplayPort Alt Mode .................................... 22

USB-C Power Delivery................................... 23

SIS Communication and Control ................ 26

Using Simple Instruction Set (SIS) Commands... 26

Host-to-switcher Communications ................ 26

Switcher-initiated Messages .......................... 26

Error Responses............................................ 27

Enabling and Disabling Telnet ............................ 27

Using the Command and Response Table......... 27

Unsolicited Responses .................................. 28

Symbol Definitions ......................................... 28

Command and Response Table for SIS

Commands ...................................................... 29

Symbol Deﬁnitions for CEC Communications

Commands ...................................................... 39

Command and Response Table for CEC

Communications SIS Commands..................... 40

Product Conﬁguration Software................. 42

Downloading PCS from the Website.................. 42

Starting PCS ..................................................... 44

Connecting Using the TCP/IP Panel............... 46

Updating Firmware ............................................ 47

Firmware Loader ............................................... 47

Downloading Firmware Loader ...................... 47

Updating Firmware Using Firmware Loader ... 50

Internal Web Page..................................... 53

Accessing the Web Page................................... 53

Web Page Components .................................... 54

Details Panel ................................................ 54

Status Panel ................................................. 55

Date and Time Panel ..................................... 55

Network Panel............................................... 58

Passwords Panel........................................... 59

Firmware Panel.............................................. 60

viiUCS 303 • Contents

Mounting .................................................. 63

Tabletop Use ................................................. 63

Rack Mounting .............................................. 63

Extron Warranty ........................................ 65

UCS 303 • Introduction 1

Introduction

This section gives an overview of the Extron UCS 303 Collaboration switchers. Topics

include:

• About this Guide

• About the UCS 303 Switcher

• Features

• USB System Architecture

• Application Diagrams

About this Guide

This guide describes the UCS 303 Collaboration switcher and provides instructions for an

experienced installer to set up and operate it.

ATTENTION:

• Installation and service must be performed by authorized personnel only.

• L’installation et l’entretien doivent être effectués uniquement par un électricien

qualifié.

In this guide, the terms “UCS,” “UCS 303,” and “switcher” are used interchangeably to refer

to the UCS 303.

About the UCS 303 Switcher

The Unified Communication System (UCS) 303 is a three input, one output multi-format

video and USB collaboration switcher with built-in display control that supports HDMI 2.0b,

DisplayPort 1.2, USB 3.2 (SuperSpeed 10 Gbps) and HDCP 2.3 specifications. It integrates

AV, USB switching and display control in environments such as conference rooms, huddle

rooms, and classrooms.

The switcher features one HDMI input, one DisplayPort input, one USB-C input, and one

HDMI output with CEC. It also has three USB switched Host inputs and a built-in USB hub

to switch and share USB peripherals such as USB web cams, touch displays, and USB

microphones. Audio can be extracted from any video input.

Resolutions up to 4K @ 60 Hz are supported, along with EDID Minder, HDCP 2.3, and

configuration via Product Configuration Software (PCS). All models extend signals up to

330 feet (100 meters). The UCS 303 is housed in a 1U high, half rack width, 8.5 inches

deep enclosure.

UCS 303 • Introduction 2

Features

• Integrates DisplayPort, HDMI, and audio sources into collaboration systems —

The UCS 303 provides centralized switching for a wide range of AV sources.

• Switches HDMI video and embedded multi‑channel digital audio.

• HDMI, DisplayPort, and USB inputs — Provides one female DisplayPort, one female

HDMI type A, one USB-C, and two USB 3.2 B host input connectors.

• HDMI output — Features one female HDMI type A output.

• Supports resolutions up to 4K @ 60 Hz with 4:4:4 chroma sampling.

• Auto‑switching between inputs — Auto-switching allows for intuitive operation in

collaboration spaces. Multiple switching priority modes are available, including last-

connected input and user-selectable priority.

• HDCP 2.3 compliant — Ensures display of content-protected 4K video media and

maintains interoperability with earlier versions of HDCP.

• Supports DisplayPort Single Stream Transport (SST) data rates up to 21.6 Gbps

• Supported HDMI 2.0b specification features include data rates up to 18 Gbps,

HDR, Deep Color, and HD lossless audio formats

• Stereo audio embedding — Digital audio signals can be embedded onto the HDMI

output.

• Stereo audio de‑embedding — Embedded HDMI two-channel PCM audio can be

extracted to the digital output, or multi-channel bitstream formats can be passed to the

output.

• Ethernet monitoring and control — Enables control and proactive monitoring over a

network.

• Support for High Dynamic Range (HDR) video — Enables greater contrast range

and wider color gamut by providing the necessary video bandwidth, color depth, and

metadata interchange capability for HDR video.

• CEC insertion — A control processor can insert CEC commands via SIS to control

devices connected at the HDMI output.

• User‑selectable HDCP authorization — Allows individual inputs to appear HDCP

compliant or non-HDCP compliant to the connected source, which is beneficial if the

source automatically encrypts all content when connected to an HDCP-compliant

device. Protected material is not passed in non-HDCP mode.

• EDID Minder — EDID Minder automatically manages EDID communication between

connected devices, ensuring that the source powers up properly and reliably outputs

content for display.

• HDCP authentication and signal presence confirmation — Provides real-time

verification of HDCP status for each digital video input and output. This allows for

simple, quick, and easy signal and HDCP verification through USB or Ethernet,

providing valuable feedback to a system operator or helpdesk support staff.

• HDCP Visual Confirmation notifies when encrypted content is sent to a

non‑compliant display — A full-screen green signal is sent when HDCP-encrypted

content is transmitted to a non-HDCP compliant display, providing immediate visual

confirmation that protected content cannot be viewed on the display.

• HDMI to DVI Interface Format Correction — Automatically enables or disables

embedded audio and InfoFrames, and sets the correct color space for proper

connection to HDMI and DVI displays.

UCS 303 • Introduction 3

• Automatic color bit depth management — Automatically adjusts color bit depth

based on the display EDID, preventing color compatibility conflicts between source and

display.

• Supports multiple embedded audio formats — The UCS 303 is compatible with

a broad range of multi-channel audio signals, providing reliable operation with HDMI

sources.

• Power Save Mode — Can be placed in a low power standby state to conserve energy

when not in use.

• Front panel security lockout — This feature locks out all front panel functions; all

functions however, are available through Ethernet or USB control.

• Built‑in web pages — Enable the use of a standard browser for device monitoring and

troubleshooting over an intuitive Web interface.

• RS‑232 display control port — Enables the use of serial commands to control an

attached display.

• Front panel USB‑C configuration port — Enables easy system configuration without

having to access the rear panel.

• Front panel LED indicators for signal presence, HDCP status, and power —

Provides visual indication of system status for real-time feedback and monitoring of key

performance parameters.

• Easy setup and commissioning with the Extron PCS program — Conveniently

configure multiple products using a single software application.

• Rack‑mountable metal enclosure — The UCS 303 features a 1U, half rack wide

metal enclosure with integrated rack mounts.

• Includes LockIt HDMI cable lacing brackets to secure HDMI connectors in

place

• Internal Extron Everlast power supply — Provides worldwide power compatibility,

with high-demonstrated reliability and low power consumption for reduced operating

cost. The Everlast Power Supply is covered by a 7-year parts and labor warranty.

USB System Architecture

A USB system architecture refers to the physical bus topology of USB devices connected

to a host device. USB devices include USB hubs, USB peripheral devices, or compound

devices (devices with a combination of USB hubs and USB peripheral devices built into it).

The system is organized in a tiered star topology to prevent multiple or circular attachments

to the bus (see figure1 on the next page) Each tier represents a degree of separation from

the host device. Per USB specifications, there are seven supported tiers, starting with the

host device (or root hub) occupying the first tier.

NOTE: Do not connect more than five daisy-chained hubs to the root hub. The

architecture does not support peripheral devices connected to USB hubs occupying

the seventh tier.

Inhaltsverzeichnis

Andere Extron electronics Schalten Handbücher

Extron electronics

Extron electronics IN1806 Series Bedienungsanleitung

Extron electronics

Extron electronics System 5cr Plus Bedienungsanleitung

Extron electronics

Extron electronics SW HD 4K Series Bedienungsanleitung

Extron electronics

Extron electronics SW2 VGA DA2 A Bedienungsanleitung

Extron electronics

Extron electronics DTP T USW 233 Bedienungsanleitung

Extron electronics

Extron electronics VersaTools MSW 4V SDI Bedienungsanleitung

Extron electronics

Extron electronics SWP123 Bedienungsanleitung

Extron electronics

Extron electronics MediaLink VersaTools MLS 100 A Bedienungsanleitung

Extron electronics

Extron electronics SW2 MTP T 15HD A Bedienungsanleitung

Extron electronics

Extron electronics System 4LQ xi Bedienungsanleitung

Extron electronics

Extron electronics PVT Series Bedienungsanleitung

Extron electronics

Extron electronics PVS 204SA Plus Montage- und Bedienungsanleitung

Extron electronics

Extron electronics ISS 108 Bedienungsanleitung

Extron electronics

Extron electronics IN1608 HDBT Series Bedienungsanleitung

Extron electronics

Extron electronics 650 UT Bedienungsanleitung

Extron electronics

Extron electronics FOX SW8 Bedienungsanleitung

Extron electronics

Extron electronics SMX System Bedienungsanleitung

Extron electronics

Extron electronics YCS SW6 MX Bedienungsanleitung

Extron electronics

Extron electronics ISS 408 Bedienungsanleitung

Extron electronics

Extron electronics USB HUB4 Series Bedienungsanleitung

Extron electronics

Extron electronics SW2 VGArs Bedienungsanleitung

Extron electronics

Extron electronics SVS 100 Bedienungsanleitung

Extron electronics

Extron electronics FOX SW8 MM Bedienungsanleitung

Extron electronics

Extron electronics System 4xi Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung