Extron electronics USB HUB4 Series Bedienungsanleitung

IMPORTANT:

Go to www.extron.com for the complete

user guide, installation instructions, and

specifications before connecting the

product to the power source.

USB HUB4 Series • Setup Guide

This guide provides basic instructions for setting up the Extron USB HUB4 Series AAP and MAAP.

HUB4 USB MAAP HUB4 USB AAP

ACTIVITY ACTIVITY

USB HUB4 MAAP USB HUB4 AAP

ACTIVITY ACTIVITY

Installation

Step 1 — (Optional) Install the wall box or mounting bracket

If using an electrical wall box or a mounting bracket, install it in the wall or furniture (see Mounting in the USB HUB4 Series User

Guide available at www.extron.com).

Step 2 — Mount the HUB4 onto a mounting frame

Attach the USB HUB4 AAP or USB HUB4 MAAP to an appropriate AAP or MAAP sized mounting frame, rack space frame, or

other Extron architectural product (see Mounting in the USB HUB4 Series User Guide).

Step 3 — Connect the USB HUB4 to the host computer

For ease of installation, connect the USB HUB4 to the host computer in either of the following ways:

• Using the Type mini-B USB port: Connect a Type A to Type mini-B cable (provided) to the

USB mini-B port on the USB HUB4 rear panel.

• Using the green captive screw USB In port: Remove the Type B or Type mini B terminator

from a Type A to B or Type A to mini-B USB cable and insert the cable wires into the 5-pole

USB In port as shown below and at right. This method may be necessary if space is limited.

(See Connecting to the captive screw USB port in the USB HUB4 Series User Guide.)

NOTE: Choose one of these two methods to connect the HUB4 to the host computer.

Do not connect the host computer to both HUB4 ports at the same time.

Wire color Port

Braided shield

V+ (+5 VDC)

Red

S (Shield)

White D- (Data -)

Green D+ (Data +)

Black –(Ground)

USB IN

RWGB

+V D- D+ S

IN OUT

WIRE COLOR

POWER

12V

1.1A MAX

Braided Shield / S

Red / +V

White / D

Green / D+

Black /

USB Cable (6')

To Host

Computer

USB Port

Type A

USB

Strip 1"to 2"from the outer jacket

of the USB cable to expose the wires.

USB HUB4 AAP

Captive

Screw

USB

Connector

Type mini B

USB Connector

Mounting

Frame

Rear

Step 4 — (Optional) Wire power connector

The USB HUB4 can be powered by the host computer. However, if the USB peripheral devices

connected to the USB HUB4 require more power than the USB HUB4 can provide, wire an

optional Extron PS 1215 1.5 A, 12 VDC power supply to the 12VDC Power In ports 1 and 2 on the

rear panel, as shown at right.

ATTENTION:

• For use only with UL Listed Extron products which accept Architectural Adapter Plates

(AAPs) or Mini Architectural Adapter Plates (MAAPs).

• À utiliser uniquement avec les produits Extron certifiés UL qui acceptent des plaques

d’adaptation architecturale (AAP) ou des mini-plaques d’adaptation architecturale

(MAAP).

USB IN

RWGB

+V D- D+ S

IN OUT

WIRE COLOR

POWER

12V

1.1A MAX

SECTION A–A

Power Supply

Output cord

68-1735-50 Rev. C

08 22

For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the

Extron Safety and Regulatory Compliance Guide on the Extron website.

All trademarks mentioned are the property of their respective owners.

Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876

Connecting additional Extron devices

If using an additional Extron device, such as a WM Series Extender, with the external power supply, connect the device power

cord to the 12 VDC Power Out ports 3 and 4 (see image below).

Maximum: Maximum peaking

and gain

Medium: Mid-level peaking

and gain

Normal: Unity gain

Circuit

board

Faceplate

www.extron.com

33-612-01 D

02 05

9-18 VDC

Power

Audio

EXTENDER WM AAP

AUDIO IN

USB HUB4 AAP

ACTIVITY

USB IN

RWGB

+V D- D+ S

IN OUT

WIRE COLOR

POWER

12V

1.1A MAX

Rear

Front

Extender WM AAP

USB HUB4 AAP Desktop Powe

Supply

Power Loop Out

Step 5 — (Optional) Mount unit in wall box

If using an electrical box, mount the USB HUB4 and the attached mounting frame onto the

box (see the image at right). If using a mounting bracket, this step is not needed.

Step 6 — Connect peripheral devices

Attach the peripheral USB devices to the front panel USB Type A ports.

Step 7 — Power on

Power on the host computer and the desktop power supply (if applicable). Check the front

panel power indicator LED to verify that the HUB4 is receiving power.

Wall opening

flush with

edge of box

Extron

CPM101

Mounting

Frame

Extron

USB HUB4

USB Hub

VTT001MAAP

POWER

USBHUB4 MAAP

ACTIVITY

Andere Handbücher für USB HUB4 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Extron electronics Schalten Handbücher

Extron electronics

Extron electronics SW8/12 VGA Ars Bedienungsanleitung

Extron electronics

Extron electronics System 10 Plus Bedienungsanleitung

Extron electronics

Extron electronics SW4 3G HD-SDI Bedienungsanleitung

Extron electronics

Extron electronics System 8 Plus Bedienungsanleitung

Extron electronics

Extron electronics SW6 AV MX AS Bedienungsanleitung

Extron electronics

Extron electronics IN1808 Series Bedienungsanleitung

Extron electronics

Extron electronics System 4xi Bedienungsanleitung

Extron electronics

Extron electronics SW4 ARxi Bedienungsanleitung

Extron electronics

Extron electronics MMX 42 AV RCA Bedienungsanleitung

Extron electronics

Extron electronics IR Broadcaster Bedienungsanleitung

Extron electronics

Extron electronics MPS 602 Bedienungsanleitung

Extron electronics

Extron electronics Matrix 12800 Series Bedienungsanleitung

Extron electronics

Extron electronics SW2 VGA DA2 AF R Bedienungsanleitung

Extron electronics

Extron electronics USB HUB4 AAP Bedienungsanleitung

Extron electronics

Extron electronics System 4LQ xi Bedienungsanleitung

Extron electronics

Extron electronics IN1804 Series Bedienungsanleitung

Extron electronics

Extron electronics MLS 100 A Bedienungsanleitung

Extron electronics

Extron electronics MPS 112 Bedienungsanleitung

Extron electronics

Extron electronics SW4 ARxi Bedienungsanleitung

Extron electronics

Extron electronics SW2 VGA Ars Bedienungsanleitung

Extron electronics

Extron electronics SW2 VGA Series Bedienungsanleitung

Extron electronics

Extron electronics ISS 408 Bedienungsanleitung

Extron electronics

Extron electronics CVEQ1 AAP Bedienungsanleitung

Extron electronics

Extron electronics MMX 42 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung