EYC DPME01 Bedienungsanleitung

Operation Manual

eYc DPME01

Industrial Grade Online pH / ORP Controller

eYc DPME01

www.eyc-tech.com

eYc DPME01 Industrial Grade Online pH / ORP Controller

Controller

Contens

ⅠOverview...................................................................................................P. 2

ⅡCombination and installation............................................................... P. 3

2.1 Main engine fixed（Panel mounting）............................................ P. 3

2.2 Panel mounting reference drawing............................................... P. 3

2.3 Sensor and sensor protection tube............................................... P. 4

III Panel introduction.................................................................................. P. 6

3.1 Panel introduction......................................................................... P. 6

3.2 Key description............................................................................... P. 6

3.3 Display description........................................................................ P. 6

IⅤ Menu introduction.............................................................................. P. 7

4.1 System setting................................................................................ P. 8

4.2 Sensor setting................................................................................. P. 9

4.3 Output setting.............................................................................. P. 1 1

4.4 Factory reset................................................................................. P. 14

V Default factory setting......................................................................... P. 15

Maintenance....................................................................................... P. 1 5

www.eyc-tech.com

eYc DPME01 Industrial Grade Online pH / ORP Controller

Controller

Initial password：0000

Note：Please read the manual carefully before use.

Thank you for purchasing our products. In order to continuously improve the quality of

the controller and improve its functions, our company reserves the right to modify the

content and icon display at any time. The actual display may be different from the

operation manual, so the actual situation shall be subject to the machine. When using

the controller, please follow the function and installation method described in the

operation manual. Our company will not be responsible for any indirect or indirect loss

or damage caused by improper use of the product by any person or entity. If you have

any problems or find any omissions or errors in the operation manual, please contact

our sales.

Safety and matters needing attention

1. Please read this manual carefully before installation to avoid safety problems and

instrument damage caused by wrong records.

2. Please avoid high temperature, high humidity and corrosive environment to install

the controller, and avoid direct sunlight exposure.

3. Special wires shall be used for the transmission line of electrode signal. It is

suggested to use the wires provided by our company instead of general wires.

4. When using the power supply, it should avoid interference from the power supply,

especially when using the three-phase power supply, the ground wire should be used

correctly (if there is a power surge phenomenon occurs, the controller's power supply

and control devices such as：dosing machine, mixer, etc. can be separated, that is, the

transmitter uses a separate power supply.)

5. The controller output contacts carry alarm and control functions. For safety and

protection reasons, please be sure to connect external relays with sufficient current

value to protect the safety of the instrument.

I. Overview

This type of pH/ORP controller is a new controller. This meter has a high degree of

intelligence and flexibility. It can measure pH/ORP value and temperature at the same

time. It is widely used in urban sewage treatment plants, water supply and other

industries and can continuously measured the pH/ORP value of solution.

www.eyc-tech.com

eYc DPME01 Industrial Grade Online pH / ORP Controller

Controller

Basic function

1. Language diversity. Factory standard is Chinese interface and can switch to English

interface.

2. Temperature compensation diversity. Pt1000, NTC10K and manual temperature

compensation are available in three temperature compensation modes.

3. Two 4 ... 20 mA outputs, corresponding to pH/ORP value and temperature, using

isolation technology, strong anti-interference ability.

4. The high and low points of the two sets of relays can be switched freely, and the

hysteresis can be adjusted freely to avoid relays on and off frequently.

5. Password management function is to prevent the misoperation by non-professional

personnel.

6. Menu prompt function , greatly facilitates the user's operation.

II. Combination and installation

2.1 Main engine fixed (Panel mounting)

Note：For panel installation, please reserve a square hole of 92.5 mm×92.5 mm on the

panel of the power distribution box. The transmitter is directly inserted from the panel of

the power distribution box. The fixator attached to the transmitter is sletted in from the

rear and stuck into the fixing slot.

2.2 Panel mounting reference drawing

www.eyc-tech.com

eYc DPME01 Industrial Grade Online pH / ORP Controller

Controller

2.3 Sensor and sensor protection tube combination

2.3.1 Sensor cable line and wiring method

Configuration of coaxial cable：

Center line：+ sensor wire line：- sensor reference line

The correct configuration diagram like up, the outer peel of the black rubber mandrel

guide be stripped off. Conductive rubber or aluminum foil sensor signal line of the central

axis and the cable must be stripped off. The cable extends to the middle of the host,

can’t have any contact, directly to the central axis of the cable to the GLASS contact is

connected to the back of the host, the cable connected to the Ref contact.

Note：If the standard cable can’t meet the requirements, shall not extend the cable,

please contact the supplier to provide a dedicated cable, otherwise the instrument

produces adverse consequences to bear. Recommended site not more than 30m to

extend the cable, or need to increase the signal amplifier.

Installation form

www.eyc-tech.com

eYc DPME01 Industrial Grade Online pH / ORP Controller

Controller

Pipeline installation considerations

Note：

1. The sensor should be installed in the bypass of the main pipeline, the front end

should install the valve, control the flow rate, the flow rate should be as small as

possible, generally as long as the outlet has a stable aqueous solution dripping out

can be. The sensor should be installed vertically and penetrate into the active water

body, and the outlet should be higher than the inlet to ensure that the electrode is

completely immersed in the solution.

2. The sensor should be calibrated before installation.

3. The measuring signal is a weak electrical signal, its acquisition cable should be

independent wiring, and the power line, control line connected to the same set of

cable connectors or terminal panels, so as not to interfere with or penetrate the

measuring unit.

Plastic shell sensor sink type installation

1. Sensor back-end threads wrapped with

appropriate raw material tape (to prevent

leakage).

2. Pass the sensor cable through the sensor

protection tube, and tighten the thread of the

sensor back-end to the thread of the inner shell.

15 cm cable is reserved at the tail of the

protective tube. The cable passes through the

splice-1. Lock it with the PG9 joint, and peel the

cable with the reference sensor stripping

method.

3. After the sensor extension line is stripped, it

passes through the splice-2 and locks, and

extends to the main machine.

4. For reserved wires, the REF to the REF, the

GLASS to the Glass, fixed on the M4 screws, and

then fixed the bracket to the pool, fixed well to

complete the assembly.

www.eyc-tech.com

eYc DPME01 Industrial Grade Online pH / ORP Controller

Controller

III. Panel introduction

3.1 Panel introduction

3.2 Key description

To prevent improper operation by non-users, enable password protection when entering

parameter settings and corrections. Each function description is as follows：

：Trigger the setting interface in the measurement mode, return to the previous

menu under the setting interface.

：Switching and numerical adjustment of menus under the setting interface.

：View historical alarm information in measurement mode, enter the next level

menu under the setting interface, and the shortcut key of the alarm information

interface.

Enter：View the basic parameters in measurement mode, and the setting interface is used

to enter the next level menu, the shortcut key of the system information interface.

3.3 Display description

In the display mode of system measurement, it will be shown as follows：

Indicator light description：

www.eyc-tech.com

eYc DPME01 Industrial Grade Online pH / ORP Controller

Controller

R1：Action indicator of relay 1, the high displays the red light, the low displays the green

light.

R2：Action indicator of relay 2, the high displays the red light, the low displays the green

light.

The figure above shows the display interface of system information and alarm

information respectively.

System information：All setting parameters of the meter are displayed in the system

information. Press Enter to enter the system information interface.

Alarm information：Up to 60 relay alarm messages can be stored. Press the button to

enter the alarm information interface.

IV. Menu introduction

The instrument is divided into four first-level menus according to the function, and each

level menu includes two or even two sub-menus. Each menu is numbered for easy

viewing and setting of meter parameters. Moreover, the secondary menu will display the

setting parameters of the lower menu instrument according to the function at the upper

right of the screen, and the user can know the instrument parameters without entering

the lower menu.

The main menu includes four first-level menus：

1. System setting

The system setting parameters of the instrument include language, password, date,

backlight, etc.

2. Sensor setting

Includes display mode, calibration, digital filtering, temperature mode, temperature

regulation, and compensation.

3. Output setting

Including relay 1, relay 2 and two 4 ... 20 mA parameter settings.

4. Factory reset

Including setting recovery and alarm information recovery.

www.eyc-tech.com

eYc DPME01 Industrial Grade Online pH / ORP Controller

Controller

Menu prompt function：

Enter the secondary menu and the parameter settings for the next menu will be displayed

at the top right of the screen.

For example, enter the backlight of the system setup menu, the backlight parameter is set

to 30 seconds.

4.1 System setting

Menu 1.1 Language

This instrument supports Chinese and English two

languages, two languages can switch freely.

For example：Select simplified Chinese and press

Enter key to confirm, the whole display interface of

the instrument will be changed into simplified Chinese.

Note：In order to prevent the user from misoperation, after the customer selects the

parameter and presses the Enter key, there will be four prompts‘ESC’, ‘OK’, ‘NO’

and‘ENT’at the bottom of the screen, corresponding to the four buttons of the meter.

The user needs to reconfirm whether the parameter is correctly selected. If yes, press the

button that is‘OK’, otherwise press is‘NO’

Menu 1.2 Password

The default password of this instrument is 0000.

You can change the password according to your

own needs. After changing the password, the user

will enter the new password after entering the

setup menu next time.

Menu 1.3.1 Date format

The meter supports the selection of three date

formats, and you can select the appropriate date

format according to your needs.

www.eyc-tech.com

eYc DPME01 Industrial Grade Online pH / ORP Controller

Controller

Menu 1.3.2 Date setting

Enter the date setting menu to set the year, month,

day, hour, minute, and so on. After successful setting,

the system time of the meter will automatically

change to the set time.

Menu 1.4 Backlight

This instrument supports four kinds of backlight time,

the user can set the corresponding backlight time

according to the demand. The screen will darken

when the meter reaches backlight time.

4.2 Sensor setting

Menu 2.1 Display mode

This instrument supports 7 display modes, each

display mode represents different measurement

accuracy and measurement unit selection.

Remarks：

14.00pH：Need to use pH sensor, the measuring range is 0.00 ... 14.00 pH.

14.00pH-Ti：Need to use pH sensor(TI), the measuring range is 0.00 ... 14.00 pH.

±2000 mV-ORP：Need to use ORP sensor, the measuring range is -2000 ... +2000 mv.

14.0pH：Need to use PH sensor, the measure range is 0.0 ... 14.0 pH.

14.0pH-Ti：Need to use pH sensor(TI), the measuring range is 0.0 ... 14.0 pH.

14pH：Need to use pH sensor, the measuring range is 0 ... 14 pH.

14pH-Ti：Need to use pH sensor(TI), the measuring range is 0 ... 14 pH.

Menu 2.2 Coefficient settings

2.2.1 Calibration 2-point

2.2.2 Calibration 3-point

Because the principle of two-point calibration is the same as that of three-point

calibration, here we take two-point calibration as an example.

Inhaltsverzeichnis

Andere EYC Controller Handbücher

EYC

EYC DPME02 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung