eyecool ECX332 Bedienungsanleitung
ECX332 Multimodal
Face Recognition
All-in-one Terminal
Quick Start Guide
v1.0
Dear users:
Thank you for purchasing ECX332 multimodal face
recognition terminal!
We believe that you’ve made a wise choice and will
enjoy wonderful changes and joyful daily life together with
global users who trust ECX332 multimodal face recognition
terminal.
Every ECX332 multimodal face recognition terminal is
produced with diligent efforts of Eyecool. Every component
is the achievement of wisdom of numerous engineers. Our
sophisticated skills and expertise been demonstrated in our
excellent world-class products. With our unremitting efforts,
we contribute to opening a wonderful and infinite life
experience for all ECX332 users. We always strive to provide
you with intimate and comfortable experience in all-round
way, from products to services.
Disclaimers
We’ve tried our best to ensure the correctness and
reliability of information provided in this manual, but
it may have deviation before and during printing.
We may upgrade the product from time to time in
order to improve the performance, reliability and
installation of the components and systems. This may
be inconsistent with the description in the manual, but
it will not affect the actual operation. Please
understand!
The functions specified in this manual shall not serve
as a reason for applying this product for special
purposes. The company shall not bear any
responsibility for the accidents and hazards caused by
the misoperation of the user.
1. Getting Started
1.1 Registration Instruction
When using multimodal face recognition terminal,
please follow the steps below for operation involving
registration or identification:
(1) Stand in front of the multimodal face recognition
terminal, and look at the screen of the terminal;
(2) Make sure the eyes are within the preview box at
the top of the screen. If the eyes are out of the
preview box at the top of the screen, it will adjust to
align.
1.2 Startup
Connect the supporting power adapter at the
interface, and the system will start automatically
within 25 sec.
2. Product Use
2.1 Device Activation - Registration
Step 1 Select language:
Chinese and English (as
shown in Fig.1)
Step 2 Network
selection and setting
(as shown in Fig. 2)
Fig. 1
Fig. 2
Network certificate setting
Domain name setting
WIFI
Wired network
English
中文
Skip
Select network
Language
User’s Manual for ECX332 Multimodal Face Recognition All-
in-one Terminal
Local: the data can be saved locally without need to
connect to network. Click Skip in the upper right
corner of the page (as shown in Fig. 2) to enter the
local version.
Network: the data can be interacted by connecting to
the network. The network can be connected via wire
or WiFi (as shown in Fig. 2).
Wired network: insert the cable, connect the wired
network, the data can be saved locally while being
uploaded and downloaded via network.
WIFI: connect WIFI, the data can be saved locally
while being uploaded and downloaded via network.
Note: the activation of local version is simpler than
that of network version.
You can register and activate by skipping steps
relevant to network version. It can be regarded as the
flight mode. After the local version is registered
successfully, you can switch to the network version by
enabling WIFI or Ethernet setting in the basic setting
to connect to the network. It is recommended to
apply the network version. The registration and
activation of the two versions are shown as follows.
Local
Fig. 3
Fig. 4
Confirm
24-hour clock applied
Please confirm password
Set time
Please enter a new password
Set date
Automatically confirm time
and date
Set door opening password and
administrator password
Date and time
User’s Manual for ECX332 Multimodal Face Recognition All-
in-one Terminal
Fig. 5
Step 1: Click "Skip" to enter the local version and
select the date and time. (As shown in Fig. 3)
Step 2: Set the door opening password and
administrator password: enter and confirm the new
password, and click "Confirm". (As shown in Fig. 4)
Step 3: Enter standby screen. (As shown in Fig. 5)
Network
Fig. 6
Fig. 7
Chinanet-6
Configure Ethernet
Connection status
Eyecool
Ethernet
WLAN
Ethernet
Eyecool-sc
Not connected
User’s Manual for ECX332 Multimodal Face Recognition All-
in-one Terminal
Fig. 8
Fig. 9
Step 1: Select wired network, open Ethernet, insert
the network cable, and connect the wired network (as
shown in Fig. 6); or select WiFi and enter correct WiFi
password to connect (as shown in Fig. 7).
Step 2: Set the door opening password and
administrator password: enter and confirm the new
password, and click "Confirm". (As shown in Fig. 8)
After the password is set successfully, it jumps to the
standby screen (as shown in Fig. 9).
2.2 Add Users
Fig. 10
Fig. 11
Confirm
Please confirm password
Please enter a new password
Set door opening password and
administrator password
About
Restore factory setting
Parameter setting
Comparison mode setting
Password management
Logging
User setting
Basic setting
Setting
User’s Manual for ECX332 Multimodal Face Recognition All-
in-one Terminal
Fig. 12
Fig. 13
(1) Enter the setting interface:
Swipe the screen upward in the main identification
interface, and the screen shows the input button of
opening by password and the setting entry
button (as shown in Fig.10). Click the setting
button on the right to enter the password input
interface, enter the administrator password and click
"Confirm" to enter the setting (as shown in Fig. 11)
(the administrator can also enter the setting with iris
recognition).
(2) Click "User setting" and then "Add user" to select
"Register as administrator" and "general user": take
the registration as administrator as an example (as
shown in Fig.12) to fill in the name and mobile phone
number respectively. If you have M1 card, swipe M1
card and click "Next".
(3) Enter registration interface (as shown in Fig.13)
and ensure the eyes within the preview box at the top
of the screen at an distance about 55mm. After 100%
of the registration progress is completed, the
successful extraction of iris feature will pop at the
bottom of the screen, indicating that the registration
is successful.
3. Door Opening Mode
3.1 Door Opening by Identification
Get close to the multimodal face recognition terminal
at the front. The iris identification main interface pops
up when the person is sensed, ensure the eyes within
Next step
0%
M1 card No.
Administrator
Enter phone number
Enter name
User’s Manual for ECX332 Multimodal Face Recognition All-
in-one Terminal
the identification box at an distance about 55mm. The
door opens when the legal face and iris are captured
and identified.
3.2 Door Opening by Password
Get close to multimodal face recognition terminal,
swipe the screen upward in the main identification
interface, and the screen shows the password input
button and setting entry button . Click the
password input button on the left, enter the door
opening password in the pop-up box and click
"Confirm" to open the door.
4. Detailed Introduction of
Management Setting
Function
4.1 User Setting
After entering setting menu, the administrator can set
the relevant user functions of the multimodal face
recognition terminal.
Fig. 14
Click “registered users” to modify their "Name" and
"Management Authority", click "Iris Feature" and "Face
Feature" to prompt whether to upload features. Click
"Confirm" to enter the registration interface to update
features, and click "Delete" button below to delete users. (As
shown in Fig. 14)
Swipe card
General users
Face feature
Iris feature
M1 card No.
Authority
management
Name Xiaobo
Mobile 15898933333
User information
User’s Manual for ECX332 Multimodal Face Recognition All-
in-one Terminal
4.2 Basic Setting
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
You can change and set the language (Fig. 16), time
and date (as shown in Fig. 17) and, wifi (as shown in
English
Ethernet setting
Time setting
中文
Language setting
Language
Basic setting
Eyecool
Chinanet-6
24-hour clock applied
Set date
Automatically confirm time
and date
Date and time
Wifi setting
Eyecool-sc
Set time
WLAN
Configure Ethernet
Not connected
Connection status
Ethernet
Ethernet
User’s Manual for ECX332 Multimodal Face Recognition All-
in-one Terminal
Fig. 18), Ethernet (as shown in Fig. 19) in basic setting
(as shown in Fig. 15).
4.3 Logging
Fig. 20
You can view the identification log, operation log and
warning log in logging. The log includes identification
door opening record, password\entry record and
identification failure record. Warning records, etc.,
containing specific date and time and real-time
images. (As shown in Fig. 20)
4.4 Password Management
Fig. 21
Enter the password management to modify the door
Warning log
Operation log
Identification log
Logging
Administrator password
Door opening password
Password setting
Inhaltsverzeichnis
Andere eyecool Touch-Terminal Handbücher
Beliebte Touch-Terminal Handbücher anderer Marken
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung
Ingenico
Ingenico AXIUM EX4000 Bedienungsanleitung
Heisei Electronics
Heisei Electronics Q-POS 815 Bedienungsanleitung
Amano
Amano MTX-15 Bedienungsanleitung
FLOWBIRD
FLOWBIRD CWT Compact Touch Bedienungsanleitung
Demco
Demco SP7 Bedienungsanleitung
Motorola
Motorola MTP850 Bedienungsanleitung
YASKAWA
YASKAWA 62H-MDC0 Bedienungsanleitung
MVG industries
MVG industries NeptuLink Bedienungsanleitung
Price Industries Limited
Price Industries Limited FDC Gebrauchsanweisung
Honeywell
Honeywell TemaKey Bedienungsanleitung
EBN
EBN BPC65-B-A16G Bedienungsanleitung