EyeLock NanoFace Bedienungsanleitung

from EyeLock®

Next Generation Facial Recognition System

System User Guide (v1.0.6)

January 2022

Visit the NanoFace™ webpage for more documentation and manuals by scanning the QR code.

eyelock.com NanoFace™ from eyeLock User Guide, v1.0.6

[email protected] January 2022

Page 2 of 38

About This Manual

NanoFace™ is an advanced facial recognition solution that provides highly accurate face

recognition in a compact, ultra-fast, cost-effective, system. This manual contains the

descriptions and operational instructions for the NanoFace™ device. It is intended and

written for system administrators who are in charge of overall operation including

installation and management. We recommend you

familiarize yourself with this manual to

make use of the product correctly and effectively.

•

The figures and screenshots in this guide are given for illustration purposes

only and may differ from the actual product.

•

Due to continuous technological improvements, the guide may not contain

the most updated information. For further information not covered in this

guide, please contact us at support@eyelock.com.

Revision History

Version

Date

Description

Note

1.0.0 09-11-2021

Initial release

1.0.1 11-15-2021 Updated Appendix A: OSD Menu List

eyelock.com NanoFace™ from eyeLock User Guide, v1.0.6

[email protected] January 2022

Page 3 of 38

Conventions in This Manual

The following symbols are used throughout this manual. Make sure that you fully

understand the meaning of each symbol and follow the instructions accompanied.

Symbol

Name

Description

WARNING Indicates information that should be followed

with the utmost care. Failure to comply with a

warning could cause severe damage to the

equipment or injury to personnel.

CAUTION Indicates a potentially hazardous situation

which, if not avoided, could result in

equipment damage, data loss, performance

degradation, or unexpected results.

IMPORTANT

Emphasizes essential information required for

user success.

NOTE Provides important supplemental information

that might enhance users' understanding or

alternative steps to accomplish their goals.

TIP

Provides optional information to help users be

more successful in their tasks

eyelock.com NanoFace™ from eyeLock User Guide, v1.0.6

[email protected] January 2022

Page 4 of 38

Table of Contents

About This Manual ........................................................................................................................ 2

Revision History

........................................................................................................................ 2

Conventions in This Manual .......................................................................................................... 3

1. Introduction to NanoFace ..................................................................................................... 5

1.1. Features ......................................................................................................................... 5

1.2. Components ................................................................................................................... 6

1.3. Parts and Controls ......................................................................................................... 8

1.4. Touch Screen ................................................................................................................10

1.5. Accessories ...................................................................................................................11

2. Installing NanoFace .............................................................................................................12

2.1. Installation Requirements ..............................................................................................12

2.1.1. Environmental Requirements .................................................................................12

2.1.2. Electrical Requirements .........................................................................................13

2.1.3. Tool Requirements .................................................................................................13

2.2. Installation Procedure ....................................................................................................15

2.2.1. Mounting Device (Wall Mount) ................................................................................15

2.2.2. Mounting Device (Gang Box Mount) .......................................................................17

2.2.3. Connecting Cables .................................................................................................18

3. Using NanoFace ..................................................................................................................23

3.1. Enrollment .....................................................................................................................23

3.2. Authentication ...............................................................................................................24

4. Product Specifications ..........................................................................................................26

4.1. Mechanical Specifications .............................................................................................26

4.1.1.

Dimensions (unit: mm)

...........................................................................................26

4.2. Key Technical Specifications .........................................................................................27

4.3. Cables and Connectors .................................................................................................29

4.4.

Environmental Specifications

...........................................................................................31

Appendix A: OSD Menu List .........................................................................................................32

eyelock.com NanoFace™ from eyeLock User Guide, v1.0.6

[email protected] January 2022

Page 5 of 38

1. Introduction to NanoFace

NanoFace is a face recognition terminal that provides face recognition in an embedded

system with real-time subject finding and local authentication for high throughput access control

and time & attendance applications.

1.1. Features

The key features of NanoFace are shown in the following table:

Feature

Description

Advanced real time subject

tracking with simple user

instructions

NanoFace accurately locates the subject face in real time

and tracks in 2 sides of angle to provides wider and deeper

positioning.

Robust subject to camera

operating range

Operating distance range (stand-off) from 0.4 to 2.0 meters

Wide angle face imaging for

outstanding capture volume

Allows height range of 145 to 210 cm (65 cm) at subject to

device distance of 2.0 m

Utilization of ultra-high

performance face matching

engines

Advanced, dedicated co-processor allows utilization of

latest and most powerful face algorithms.

Supplemental display of

authorization results

Can display authorization decision when coupled to access

control provisioning logic so that “subject recognized, but

not granted permission” information can be displayed.

Supports multiple languages in

GUI

English, Korean, Simplified Chinese, Traditional Chinese,

Japanese, Arabic, Spanish, Italian, Turkish, French

Large on-board (embedded) face

template database

Stores up to 20,000 active face templates on-board in 1:1

recognition (verification) identification mode. Stores up to

20,000 active face templates on-board in 1:N identification

mode.

Use in widest range of lighting

conditions

Embedded illuminators in both white and NIR ranges

expand use in adverse ambient light environments.

High speed face matching Can provide up to 20,000 matches per second on-board.

Standard multi-band RFID reader

MiFare, DesFire, FeliCa card support with standard

embedded ISO/IEC 14443 reader.

Full range of deployment options Standard connections in include selectable Wiegand IN or

OUT, GPI, RS 485, and contact relay

Fully compatibility with eyeLock’s

EIS system software

Supports full integration with EIS for distributed access

control and T&A solutions on single network.

eyelock.com NanoFace™ from eyeLock User Guide, v1.0.6

[email protected] January 2022

Page 6 of 38

1.2. Components

Before you begin, make sure that all the following items are included with your device. If

you find anything is missing, contact your dealer/distributor/reseller.

Mounting Plate

NanoFace®

eyelock.com NanoFace™ from eyeLock User Guide, v1.0.6

[email protected] January 2022

Page 7 of 38

Table 1. NanoFace component table

Name Quantity

Description Note

NanoFace 1

Main system / face recognition terminal

Mounting Plate 1 Installs the unit on a wall or on an outlet

box

Diode 1 Prevents currents in unintended

directions (See Relay Connection for

an

example of its use)

Power cable 1 Connects user supplied power to device

Relay cable 1

GPI cable 1

Wiegand cable 1

RS-485 cable 1

AC adapter 1

Output 15V

DC, 2A

Power cord (optional) 1

eyelock.com NanoFace™ from eyeLock User Guide, v1.0.6

[email protected] January 2022

Page 8 of 38

1.3. Parts and Controls

Name

Description

Note

Camera

Captures the face images

IR LED Illuminates the face using the NIR lighting when

capturing the faces

Touch screen

Shows preview images before capture and provides

a graphical interface for enrollment and device

configuration

White LED Gives supplemental illumination in dim ambient light

RF card reader

Indicates the area where RF cards can be read

Ambient light sensor

Detects the changes of light in the surrounding

environment

Speaker

Delivers sound from device

Mounting plate socket Attaches the unit with the mounting plate

USB port Connects a USB flash drive

NanoFace by eyeLock

eyelock.com NanoFace™ from eyeLock User Guide, v1.0.6

[email protected] January 2022

Page 9 of 38

Name Description

Tripod socket Attaches a tripod (or equivalent mount) with a

standard consumer tripod 1/4-20 UNC screw

Tamper switch

Starts an alarm, if configured, when a physical

tampering attempt is detected

Removable tabs Allow the wire routing and let cables go through the

openings when removed

Ethernet port Connects an ethernet cable

Power plug Connects the power cable

Factory reset button Restores the device to its original manufacturer

settings

RS-485 termination

switch

Provides termination when the device is located at the

physical end of RS-485 wiring

RS-485 Connects the RS-485 cable

Wiegand input or

output

Connects the Wiegand cable either as input or as

output selectively

GPI input Connects the GPI cable

Relay Connect the relay cable

eyelock.com NanoFace™ from eyeLock User Guide, v1.0.6

[email protected] January 2022

Page 10 of 38

Debug Reserved for debugging purposes only

1.4. Touch Screen

No. Name

Description

Note

1 Status indicator Shows the status of network

connection and third party application



White: online

 Red: offline or not

usable

2 Settings button

Enters the device setup menu screen

3 Enrollment button

Enters the user enrollment menu screen

4

Preview screen

Gives a preview of subject’s face

5 Home button

Goes to the home screen

6 Back button Goes back to the previous menu screen

7 Settings Shows settings menu – User, Device,

C

ommunication, Display, Authentication,

Log

eyeLock NanoFace Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken