Product Learn Mode Activation
The learn mode is not yet available from the customer UI but it can be triggered by an advanced
set of tools.
The Learn Mode can be activated through the API Tool following these steps:
1. Open the API tool going to the link: https://apitool.ezlo.com/auth
2. Search for a controller
3. Connect to the controller
4. Once the connection is established, in API Call section select hub.extensions.plugin.run
5. Select HUB:zwave/scripts/start_learn
Initiate Controller Replication
Follow Device inclusion procedure. Atom will detect that controller is being included and
Controller Replication will be started.
Product Factory Reset
1. Wi-Fi Reset: Set network settings to factory defaults. With the gateway still plugged into
the USB port, press the reset button twice within a lapse of less than 2 seconds - The
status LED will blink twice per second as confirmation.
2. Soft Reset: This will remove all the paired devices and reset the user settings, while still
remaining on the configured Wi-Fi network - The status LED will blink fast as
confirmation. With the gateway still plugged into the USB port for power, long-press on
the reset button for 7 seconds (or more than 5 but less than 9)
3. Factory Reset: Reestablish all gateway settings to factory defaults. With the gateway
still plugged into the USB port, long-press the reset button for more than 10 seconds -
The Status LED will turn ON solid as confirmation. If this controller is the primary
controller for your network, resetting it will result in the nodes in your network being
orphaned and it will be necessary after the reset to exclude and re-include all of the
nodes in the network. If this controller is being used as a secondary controller in the
network, use this procedure to reset this controller only in the event that the network
primary controller is missing or otherwise inoperable.
