Ezviz C6B Bedienungsanleitung
www.ezvizlife.com
1
Setup
Step 1 Power-on
Plug the power cable into the camera, and then plug the power adapter into an outlet as shown
in the figure below. The LED indicator will flash red and blue when the camera is ready for
setup.
For details of the LED indicator status, refer to the Basic section.
Step 2 Camera Setup
1. Create a user account
- Connect your mobile phone to Wi-Fi using your 2.4GHz network.
- Search for "EZVIZ" in the App Store or Google Play (TM).
- Download and install the EZVIZ app.
- Launch the app.
- Create, and register an EZVIZ user account by following the startup wizard.
2. Adding a camera to EZVIZ
- Log in to your account using the EZVIZ app.
- Tap "+" on the Home page to go to the Scan QR Code interface.
Power Cable
Power Outlet
2
Bottom of the Camera
- Scan the QR Code on the bottom of the camera or the front cover of the Quick Start Guide.
- Enter the password for your Wi-Fi network.
- Select the correct time zone and DST information.
- Tap "Finish" to finish setup.
• If the camera fails to connect to your Wi-Fi network, press and hold the RST button
for 3s and repeat Step 2.2.
• To select another Wi-Fi network, press and hold the RST button for 3s to reboot the
device. When the LED indicator flickers red and blue, you can choose a new Wi-Fi
network.
3
3. To Change the Default Password
The camera uses the verification code found on the bottom of the camera as the default
password. After adding the camera to your network, you will be required to change the device
password to ensure video security. The password is used for Image Encryption, too. If you
turn on the Image Encryption, you will be required to input your password when you view live
video or playback stored video from the camera.
- Go to the camera settings screen to change the default password.
- Tap on “Change Password”.
- Tap on “Edit”.
- Enter the original verification code located on the bottom of the camera.
- Enter the new password. Please use letters and numbers to make a password anywhere
from 6 to 12 characters in length.
4. Angle Adjustment
You can adjust the camera using the EZVIZ app to find the best angle. The camera pans from
0° to 340° and tilts from -80° to 50° (-80° to 0° is the range of privacy mask coverage).
4
- Log into the EZVIZ app.
- Select the camera.
- Tap on the “Smart Mask” icon. The camera lens will rotate up and hide under the lens cover.
Turning on Smart Mask
Smart Mask
Lens will rotate up under the lens cover
5
Wall Mounting (Optional)
The camera can be mounted on the wall or ceiling.
• Make sure the wall is strong enough to withstand three times the camera's weight.
• The installation surface should be clean and flat.
1. (Optional) If you want to install the microSD card, insert the microSD card into the microSD
card slot on the rear side of the camera. Otherwise, you can skip this step.
2. Attach the camera base to the place where you want to affix the camera.
3. (Optional) If the wall is solid, drill and insert three expansion screws.
4. Affix the camera base onto the template using the three metal screws.
5. Make sure the on the base towards you and fix the base to the wall with three screws.
6. Install the camera on the base, and turn it 15° to secure it.
7. Connect the power cable to the camera. If the camera was previously connected to the Wi-
Fi network, it will automatically connect to the same Wi-Fi network.
Wooden WallSolid Wall
6
Appendix
Box Content
Camera (x1) Base (x1)
Power Cable (x1) Screw Kit (x1)
Power Adapter (x1) Quick Start Guide x(1)
7
Basics
Dual MIC
LED Indicator Speaker
Lens
Blue Flicker: The network is properly
connected.
Solid Red: The device is activating.
Slow Red Flicker: Invalid network connection.
Fast Red Flicker: MicroSD card or other error
occurred.
Alternating Blue and Red Flicker: Camera is
ready for Wi-Fi setup.
LED Indicator
LED Indicator Status
8
Name Description
Power Input 5V±10%
Network Interface 10M/100M Self-adaptive Ethernet Interface
Reset Button Hold down the reset button for 10 seconds to restore default settings.
MicroSD Card Slot Insert microSD card for local storage.
MicroSD Card Slot
RESET Button
Network Interface
Power Input
9
Troubleshooting
Q: “The device is offline.” or “The device is not registered.” prompts appear when adding the
camera using the EZVIZ app.
A: 1. Make sure the network, which the camera is connected to, is working properly and the
router’s DHCP is enabled.
2. Hold down the RESET button for 3 s to reset the settings and set the network again.
Q: How to use the microSD for local sotrage?
A: Insert a microSD card into the card slot and add the camera to your EZVIZ account. Log in
the EZVIZ app and enter the “Device Details” interface, if the “Initialize Storage Card” button
appears, you need to initialize the microSD card first.
The microSD card storage for the motion detection recording is enabled by default.
Q: The mobile phone cannot receive alarm prompts when the camera is online.
A: 1. Make sure the EZVIZ app is running on your mobile phone.
2. For Android OS mobile phone, make sure the app is running in the background; and for iOS
mobile phones, enable the message push function in “Settings > Notification”.
Q: Live view or playback failed.
A: Make sure your network is well connected. Viewing live video requires a good bandwidth. You
can refresh the video, or change a network and try again.
Andere Handbücher für C6B
2
Inhaltsverzeichnis
Andere Ezviz Digitalkamera Handbücher
Ezviz
Ezviz CS-CV228 Bedienungsanleitung
Ezviz
Ezviz C8C Lite Bedienungsanleitung
Ezviz
Ezviz C6 Bedienungsanleitung
Ezviz
Ezviz C3W Bedienungsanleitung
Ezviz
Ezviz CS-LC3 Bedienungsanleitung
Ezviz
Ezviz C2C H.265: C2C-FHD H.265 Bedienungsanleitung
Ezviz
Ezviz S6 Bedienungsanleitung
Ezviz
Ezviz DYS05100CP-U Bedienungsanleitung
Ezviz
Ezviz UD15531B Bedienungsanleitung
Ezviz
Ezviz DP1C Bedienungsanleitung
Ezviz
Ezviz C2 MINI Bedienungsanleitung
Ezviz
Ezviz C6P Bedienungsanleitung
Ezviz
Ezviz Mini Pano Bedienungsanleitung
Ezviz
Ezviz CP4 Bedienungsanleitung
Ezviz
Ezviz CS-CV240-B0-21WFR Bedienungsanleitung
Ezviz
Ezviz C3TN Bedienungsanleitung
Ezviz
Ezviz Mini Plus Bedienungsanleitung
Ezviz
Ezviz LC3 Bedienungsanleitung
Ezviz
Ezviz C4W Bedienungsanleitung
Ezviz
Ezviz C6C Bedienungsanleitung
