f Exposure to noise can
cause hearing loss.
f
Loss of control can cause personal injury.
f-
-
Contact with a “live” wire will also make exposed
metal parts of the power tool “live” and shock
the operator.
f
After using, pull the mains plug.
fAlways direct the cable to the rear away from
the machine.
fDo not carry the machine by the cable.
fWhen working with the machine, always hold it
stance.
fDuring pauses in the work, when not in use or
during work on the machine itself (e.g., chang-
ing of the working tools, repairs, cleaning, ad-
justment), pull the mains plug.
fPersons under 16 year of age are not permitted
to operate this machine.
fKeep the tool accessories out of the reach of
children.
fOnly use original accessories
STRUCTIONS
f
f
electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes prop-
erty damage.
f
-
The machine is securely guided with
both hands.
f A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
fFor drilling without impact in wood, metal, ce-
ramic and plastic as well as for screwdriving,
tools without SDS-plus are used (e.g., drill bits
with cylindrical shank). For these tools, a keyless
chuck or a key type drill chuck are required.
fThe quick change chuck is automatically locked.
change chuck.
fCheck the
latching by pulling the tool.
f-
The dust protection cap largely pre-
vents the penetration of drilling dust into the
tool holder during operation. When inserting
the tool, pay attention that the dust protection
cap is not damaged.
f
Materials containing
asbestos may only be worked by specialists.
As far as possible, use a dust extraction system
suitable for the material.
Provide for good ventilation of the working
place.
-
pirator.
Observe the relevant regulations in your coun-
try for the materials to be worked.
f
Dust can easily ignite.
f
Rotating tool inserts can slip
f
Loosen the
application tool.
f
When switching on with a blocked drilling tool,
high torque reaction can occur.
fTo save energy, only switch the power tool on
when using it.
f
The
tool insert can jam and lead to loss of control
over the power tool.
This tool vibrates during use. Repeated or
longterm exposure to vibration may cause tem-
porary or permanent physical injury, particularly
to the hands, arms and shoulders.
-
First be examined by a doctor and then have
regular medical check-ups to ensure medical
problems are not being caused or worsened
from use. Pregnant women or people who
have impaired blood circulation to the hand,
past hand injuries, nervous system disorders,
diabetes, or Raynaud’s Disease should not use
this tool. If you feel any symptoms related to
vibration (such as tingling, numbness, and white
possible.
Use tools with the lowest vibration when there
is a choice.
Take vibration-free breaks during each day of
work.
Grip tool as lightly as possible (while still keep-
ing safe control of it). Let the tool do the work.
Make sure the power supply information on the
machine’s rating plate are compatible with the
power supply you intend to connect it to.
English | 9
www.ffgroup-tools.com
RH 2-26 PLUS | RH 2-26 FC PLUS
