Falcon FT5020 Bedienungsanleitung

User Manual )$/&21)7

Keys:

1 Repertory keys 2 Recall key

3 Redial key 4 Mute key

5 Handsfree / Massage waiting 6 Quiet key

7 Loud key 8 Set key

9 Up key 10 Down key

11 OK key (dial number displayed)

Display symbols:

In setting mode No memory content

Ready for use Microphone off

Baby Call (direct call) number set Recall key pressed

When trying to connect: Entry mark when setting

telephone locked (e.g. volume)

Pause Telephone locked

"*" key pressed Phone number

"#" key pressed Handsfree activated

New call in calls list

Instruction

1234

91011

Recommended installation of telephone

Do not expose the telephone to direct sunlight or other sources of heat.



Operate at temperatures between +5°C and +40°C.



Maintain a distance of at least one metre between the telephone and radio



equipment, e.g. wireless telephones, wireless pagers or TV sets. Otherwise,

telephone communication could be impaired.

Do not install the telephone in dusty areas as this can shorten the service



life of the telephone.

To clean, wipe with a moist or antistatic cloth only, never with a dry cloth (risk



of electrostatic charging and discharge) or harsh cleaning agent.

Furniture lacquer and polish can be damaged by contact with parts of the



unit (e.g. device feet).

Connecting

Insert the short end of the coiled handset cord in the socket provided in the handset

and the long end in the socket marked with an on the underside of the device.

Plug the phone cord into the outlet on the wall and the other end into the socket

marked with a on the underside of the device. Then your telephone is ready to

use.

Setting the internal clock

Initiate function.

The current set time is displayed in 24-hour

mode (default setting: 00:00).

Enter the correct time in hours <hh> and

minutes <mm> (24-hour mode).

Press the Set key.

Preparing the telephone for use

...

or...

Making Call

Dialling a number

Lift handset, dial number.

Dial number (you can delete wrongly entered digits with

and then enter the correct digit) and press the OK key. Lift

the handset if you want to talk via the handset.

Any digits after the 20th digit are moved from right to left in the display. The Last

number redial key can be used to insert pauses when dialling, starting from the

2nd digit.

Activating/deactivating handsfree talking

With this telephone you can also make calls (handsfree mode) or settings without

lifting the handset. The best distance from the microhone for speaking is about 50

cm.

Activating during a call via the handset



Press the Loudspeaker key during the call.

Activating before dialling the number



Before dialling: hold down the Loudspeaker key until you

can hear the dialling tone.

Deactivating handsfree talking

Lift the handset during the call.

Last number redial

The last 5 numbers dialled (up to 32 digits) are saved automatically. You can

retrieve these numbers from the last number redial list and dial them again:

Redialling the last number dialled

Lift the handset and press the last number redial key. The

last number dialled is redialled immediately.

Dialling from the last number redial list

Without lifting the handset: Press the last number redial

key.The last number dialled is displayed. (You can leave

the last number redial list at any time by pressing .)

Using the Down/Up key, scroll through the list to the

desired number.

Press OK or key.

Lift the handset if you want to talk via the handset.

Dialling using the repertory keys

Lift handset. Press repertory key.

Press repertory key. Press OK or Key.

Lift the handset if you want to talk via the handset.

...

Saving numbers

Different telephone settings must be completed with the Set key so that they are

available permanently.

In order to cancel without saving, e. g. after an incorrect entry, replace the handset

instead of pressing at the end. The original setting is then retained.

Saving repertory numbers

You can save up to 10 phone numbers on the repertory keys.

Press the Set key.

Press the repertory key under which you want to save the

repertory number.A number that has already been saved is

shown in the display. If the memory for this repertory key is

empty, appears in the display.

Enter the number to be saved (up to 32 digits).

or ...

Saving from the calls list (if service is available)

Press the Down/Up key until the desired number appears

in the display.

or ...

Saving from the redial list

Press the last number redial key.

If necessary, press the Down/Up key until the desired

number appears in the display.

To terminate the process:

Press the Set key.

Saving during a call

You can also save phone numbers in the same way during a call (notebook

function).

Note: After the 20th digit, any following digits are moved from right to left in the

display.

Delete all repertory numbers

Initiate function.

Press the Set key.

...

Adjusting the telephone

Adjusting the ringer volume

The volume of the ringer can be set to one of 4 levels and can also be deactivated

completely (default setting: level 4).

To adjust when the telephone is idle:

Initiate function.

Adjust the volume with the Loud/Quiet key.

Press the Set key.

To adjust while the telephone is ringing:

Press before lifting the handset.

The last value set is saved.

Setting the ringer frequency

The frequency (speed) of the ringer can be set to one of threelevels (default setting:

level3).

Initiate function.

Press one of the keys 1...3:

1-highest frequency; 3-lowest frequency.

Press the Set key.

Setting the ringtone

Ten different ringtones can be set for the ringer (default setting: ringtone9).

To set with the telephone is idle:

Initiate function.

Press one of the keys 0...9

Press the Set key.

To set while the telephone is ringing:

Press one of the keys 0 to 9.

Setting the handset volume

The volume on the handset can be set to one of 3 levels and saved (default setting:

level1).

Initiate function.

Adjust the volume with the Loud/Quiet key.

Press the Set key.

...

Adjusting the telephone

Mute

You can deactivate the telephone's handset and microphone. Then the other party

can no longer hear you.

During a call: Press the Mute key

Activate: Press the key again.

Activating/deactivating the mute melody

You can activate and deactivate the mute melody for the mute (default setting: on).

Initiate function.

0: deactivate; 1: activate.

Press the Set key.

Adjusting the loudspeaker

While in handsfree mode, you can set the volume to one of 7 levels and save it

(default setting: 1).

Adjust the volume with the Loud/Quiet key.

Baby call (direct call) number setting

If a phone number is set for the Baby Call function, it is dialled automatically when

the telephone is locked (s."Activating/deactivating the telephone lock") after you

lift the handset (or press the Loudspeaker key) and press anykey (except ,

,,). The telephone does not allow other phone numbers to be dialled, but

incoming calls can be received.

Initiate function.

Enter direct call number (max. 32 digits).

Press the Set key.

When the baby call function is activated, you will see and in the display.

Deactivating

Initiate function.

Press the Set key.

Deleting a baby call phone number

Initiate function.

Press the Set key.

...

Adjusting the telephone

Activating/deactivating the telephone lock

The telephone can be locked completely (with the exception of a baby call phone

number if set) so that it cannot dial any phone numbers, including the baby call

phone number. You can continue to receive incoming calls.

Initiate function.

0: unlock; 1: lock.

Press the Set key.

When the telephone is locked, you will see in the display.

Activate/deactivate call duration display

The telephone can display the approximate call duration in the display (up to 99

min. 59 sec., default setting: on). If the call duration display is activated, the time

display begins 8seconds after the last digit is dialled.

Initiate function.

0: deactivate; 1: activate.

Press the Set key.

Setting the pause time

If necessary, the pause time of the Pause key (pause function from second input

position) can be changed to 1, 3 or 6 seconds (default setting: 3 seconds).

Initiate function.

0: 1 sec.; 1: 3 sec.; 2: 6 sec..

Press the Set key.

Changing the dialling mode

Initiate function.

1: Tone dialling.

2: Pulse dialling without ﬂash function.

Press the Set key.

Changing dialling modes during a call

If your telephone is set to pulse dialling and you want to use functions that require

tone dialling (e.g. remote access to an answering machine), you can change the

dialling mode during a call.

With an open connection: press the star key.

Enter digits for remote control/data transfer

The telephone is reset to the original dialling mode by hanging up the handset.

...

Operation on a PABX

Enter/delete an external line prefixe

If you are using your telephone on a PABX, you may have to save one or more

external line prH¿xes. A dialling pause is set automatically with the external line

SUH¿[H YRXFDQVDYHXSWRWKUHHH[WHUQDOOLQHSUH¿[HV

Initiate function.

,IQRH[WHUQDOOLQHSUH¿[HKDVEHHQVHWLQDORFDWLRQ

appears in the display.

,IVHYHUDOH[WHUQDOOLQHSUH¿[HVDUHVDYHGWKHVHDUH

displayed next to one another; the current external line

SUH¿[HWREHHGLWHGÀDVKHV

If necessary, use the

NH\WRWRJJOHEHWZHHQWKHH[WHUQDO

OLQHSUH¿[HVGLVSOD\HGWRHGLWWKHPDVIROORZV

To deleteDQH[WHUQDOOLQHSUH¿[

Press the Set key.

To enterDQH[WHUQDOOLQHSUH¿[H

Enter a one- to three-digit code.

Enter additional external line preķxes:

Press the Redial keyHQWHUQH[WH[WHUQDOOLQHSUH¿[H

Press the Set key.

Recall key (on a PABX)

During an external call, you can make a recall or divert the call. To do this, press

the Recall key . The VXEVHTXHQW procedure depends on your PABX. By default,

the Recall key is preset to a ÀDVK time (interruption time) of 270 ms for use of new

features on public telephone systems. With a connection to a PABX, it may Ee

necessary to change the Àash time (e.g. 600 ms). To do this, please refer to the

operating instructions for your PABX.

Setting the ĸash time for the Recall key

Initiate function.

(QWHUGHVLUHGÀDVKFRGH

0PV2PV

1PV3PVGHIDXOWVHWWLQJ4PV

Press the Set key.

...

Calling Line Identification

Using Calling Line Identification

Under the following conditions, the phone numbers of incoming calls are shown on

WKHGLVSOD\XSWRWKH¿UVWGLJLWVDQGDXWRPDWLFDOO\VDYHGLQDFDOOVOLVW

Both your network SURYLGHU and the caller's network proYider must offer

&DOOLQJ/LQH,GHQWL¿FDWLRQ

Both you and the caller must haYe requested this serYice (if necessary

IURP\RXUUHVSHFWLYHQHWZRUNSURYLGHUV

If these conditions are met, but a caller has suppressed Calling Line ,GHQWL¿FDWLRQ

before making the call, you will see on the display instead of the phone

number. If it has not been possible to identify the number for other (technical

reasons, you will see or on the display. Longer phone RYHU 

GLJLWVQXPEHUVDUHVKRZQZLWKWKHHQGRIWKHQXPEHUVKRUWHQHG

Calls List

The calls list includes up to  entries. If the same subscriber calls more than once,

a new entry is not created. Up to 99 repeated calls are displayed in the additional

information. The most recent call is displayed in the ¿UVW position (position number

"01  Older entries are PRYHG downwards with each new incoming phone number

until they are deleted from the list.

In the calls list you can (a)scroll through the phone numbers displayed, (b)query

additional information, (c)delete entries, (d)VDYH phone numbers from the calls list

WRDUHSHUWRU\NH\VHHSDJH(e)dial a displayed phone number directly.

Viewing caller histories and dialling phone numbers

If there are entries in the calls list that haYe you haYe not yet seen, Àashes in

the display. You can UHWULHYH the calls list, scroll through its entries, YLHZ additional

LQIRUPDWLRQDERXWDFDOODQGFDOOEDFNGLUHFWO\

Press the Down key.

The phone number of the most recent call appears in the

display. Its position number  is displayed to the left of

the number. If the phone number contains more than 7

digits, the ¿UVW  digits will be displayed ¿UVW then the rest

after one second. (You can OHDYH the calls list at any time

by pressing 

To scroll through the calls list:

Press the Down/Up key.

To view additional information:

Press key. The date and time of the displayed entry is

GLVSOD\HGZLWKWKHQXPEHURIFDOOVRQWKHULJKW

Press key again to back to the calls list.

Dial the phone number:

Press OK or

key. $IWHUVWKHQXPEHULVGLDOOHG

/LIWWKHKDQGVHWLI\RXZDQWWRWDONYLDWKHKDQGVHW

Inhaltsverzeichnis

Andere Falcon Telefon Handbücher

Falcon

Falcon FT5010 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

D-Link

D-Link DWR-720/PW Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Panasonic

Panasonic KX Series Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung