Faminode Smart 10 Bedienungsanleitung

Please read this manual before operating your digital photo frame,

and keep it for future reference.

USER MANUAL

V1.1

50005000032

Digital picture frame

Smart 10

CONTENTS

What’s in the Box

Frame Overview

Getting Started

Using the Ourphoto App

Binding Your Frame

Uploading Photos and Videos

Deleting Photos and Videos

Settings Menu

FAQ

FCC Statement

Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the

equipment.

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following

measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject

to the following two conditions (1)this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

WHAT’S IN THE BOX

FRAME OVERVIEW

Faminode Smart 10 Digital

Photo Frame

Power Adapter with

Power Cable

Stand USB Cable User Manual

USER MANUAL

FaminodeSmart 10 Digital Photo Frame

10" IPS Touch Screen

PIR Motion Sensor

Magnetic Suction

Reset

Micro USB Port

USB Port

DC Power Port

microSD Card Slot

1 2

GETTING STARTED

1. Installing the Frame Stand

Attach the frame stand to the back of the frame. The frame stand is magnetic so

that you can easily install the frame in the correct position according to the magnet

design. You can place the digital photo frame horizontally or vertically. It is highly

recommended to place the photo frame horizontally during the ﬁrst set up.

2. Connecting to Power

Connect the power cable to your frame and plug the power adapter into a wall

outlet. The photo frame will automatically power up.

3. Initial Settings

There are several initial settings (Wiﬁ, Device Info, Sleep Schedule, etc.) when you

enter the system for the ﬁrst time.

4. Connecting to Wiﬁ

You can connect to Wiﬁ during the initial settings or under the Wiﬁ setting. Select

the Wiﬁ network you would like to connect to and enter the correct password if

required. If your Wiﬁ network is not on the list, restart the router or move your

frame closer to your router, wait for seconds and check it again.

Note:

① The photo frame supports 2.4GHz Wiﬁ networks only.

② A private Wiﬁ network is highly recommended.

5. Frame ID

The photo frame will be activated when connecting it to Wiﬁ for the ﬁrst time. You

can ﬁnd the photo frame's unique Frame ID number on the photo frame: go to

Settings →Device Info. The Frame ID number is required for binding your frame via

the app or email.

USING THE OURPHOTO APP

1. Downloading the OurPhoto App

Please download and install the OurPhoto app on your mobile device by searching

OurPhoto on the App Store or Google Play.

2. Creating an OurPhoto Account and Log in

① Open the OurPhoto app, select Sign Up and ﬁll in all the required information (if

you already have an account, please log in directly).

② Click the right arrow icon to verify the email address you provided. A veriﬁcation

code will be sent to your email address.

3 4

③ Collect and ﬁll in the veriﬁcation code, then click Submit to complete the account

registration.

3. Inviting Friends to Download the App and Log in

Your friends and family can also send pictures or videos to your photo frame via

the app. They’ll need to download and install the OurPhoto app, create an account,

Your Frame via the App" below).

BINDING YOUR FRAME

1. Binding Your Frame via the App

The following instructions are only applicable to the frame owner or the user who is

the ﬁrst to bind the frame.

①Log in to the OurPhoto app.

②Select Devices.

③Click the "+" next to My Devices.

⑧ Conﬁrm the binding request on your frame. Go to Settings →User Management

→ Pending User Requests, click Accept.

Note: Please make sure that you turn on the "Accept New Users" to receive

the binding request.

5 6

④Enter the Frame ID.

Note: Frame ID is a 6-digit series number which can be found on your frame.

Go to Settings →Device Info.

⑤Create a device name for your frame.

Note: We recommend you to name your frame after the Frame ID for easy

identiﬁcation, for example, if the Frame ID is 123456, please name your frame

Frame123456.

⑥Create a unique email address for your frame.

Note: We recommend you to create the address with the Frame ID for easy

identiﬁcation, for example, if the Frame ID is 123456, please create an email

address [email protected].

⑦Then click Bind.

OUR PHOTO

Username

Password

Forgot Password? Sign Up

Username

Password

Verify password

Veruft Code

Submit

My Devices

Bound Devices

Back Devices

Device name frame123456

Device Email frame123456@ourphoto.cn

Frame ID 123456

Bind

Devices Devices Bind

Devices Messages

Video

Photo

Media

⑨If the binding succeeds, this account will appear under the Users, and it will be

the main account of your frame.

Settings

Device Info Accept new users

Users

User Management

PC Control

Wi-Fi

Album Settings

System Settings

About

Pending User Requests

User 1 Refuse Accept

2. Inviting Others to Bind Your Frame via the App

The following instructions are only applicable to the non-frame owner to bind the

frame. And binding requires the frame owner to operate and conﬁrm on the frame.

Here is what your friends should do:

①Download and install the OurPhoto app.

②Create a new OurPhoto account and log in. Go to Devices →Bound Devices,

and then click "+".

③Enter the frame ID number of your frame.

Note: Frame ID is a 6-digit series number which can be found on your frame.

Go to Settings →Device Info. Please send this Frame ID to your friends.

④Create a device name for the frame.

Note: We recommend your friends to name the frame after the Frame ID for

easy identiﬁcation, for example, if your Frame ID is 123456, please name the

frame Frame123456.

⑤Then click Bind.

On your frame, you'll need to conﬁrm your friend's binding request. Go to Settings

→User Management →Pending User Requests, click Accept.

Then your friends and family will be able to share photos directly to the frame from

anywhere in the world.

To check the list of your frame's bound users, go to Settings →User Management

→Users.

Settings

Device Info Accept new users

Users

User Management

PC Control

Wi-Fi

Album Settings

System Settings

About

User 1

Pending User Requests

User 2 User 3

User 4 Refuse Accept

Note: The above screenshot is for reference, please update to the latest ﬁrmware

version.

7 8

Devices Messages

Video

Photo

Media

My Devices

Bound Devices

Back Devices

Device name frame123456

Frame ID 123456

Bind

Devices Devices Bind

Note: The above screenshot is for reference, please update to the latest ﬁrmware

version.

3. Binding Your Frame via Email

You and your friends can also bind your email accounts to the frame, so that you

can share photos to the frame via email. Make sure the photo frame has already

been activated and bound via the app before you bind it via email. Otherwise,

it cannot bind the frame via email successfully.

① Send an email with the subject "bd + Frame ID" to the frame's unique email

address (the one you created when you bound your frame for the ﬁrst time).

For example, if your Frame ID is 123456, send an email with the subject

"bd123456" to the frame's unique email address.

② Wait for seconds, you will receive a conﬁrmation email from the OurPhoto team,

and your email account is successfully bound to the frame. You can also ﬁnd the

bound email accounts in the User Management interface.

UPLOADING PHOTOS AND VIDEOS

1. Uploading Photos and Videos via the App

9 10

Devices Messages

Video

Photo

Media

②Click Media to upload your photos or videos on your mobile device. Select the

photos or videos you would like to upload and choose the frame you would like

to send to. Click the right arrow icon to conﬁrm.

③Click Photo or Video to take new photos or videos and choose the frame you

would like to send to. Click the right arrow icon to conﬁrm.

④The photo frame will receive the photos or videos in seconds, you can check the

photo or video library on the frame.

Note:

• If the frame didn’t receive the photos or videos, please reboot the product or

check the Wiﬁ network.

• Each video clip is limited to 30 seconds or 100MB.

• The app supports sending Full Image to the frame. Please make sure your app

version is 1.1.94 (iOS)/1.0.4 (Android) or above.

2. Uploading Photos via Email

Send an email with photos attached to the email address of the frame. Your photos

will be received in seconds, you can check the photo or video library on the frame.

Note:

• Videos cannot be uploaded via email.

• Make sure you have successfully bound the frame via email before uploading

pictures.

3. Uploading Photos and Videos via a Computer

① Make sure your frame and computer are on the same Wiﬁ network.

②On your frame, enter the PC Control interface, go to Settings →PC Control. Click

the Start button, you will ﬁnd an FTP address on the screen.

③On your computer, open File Explorer. In the File Explorer, enter the FTP address

in the address bar.

④ Then you can drag and drop the photo and video ﬁles on the computer that you

would like to transfer to the frame folder showed up.

⑤Click Stop on the frame to end PC connecting and uploading.

⑥Your photos or videos will be received in seconds, you can check the photo or

video library on the frame.

①Open the OurPhoto app and log in to your account. Make sure you have bound

your account to your frame before.

Note: The above screenshot is for reference, please update to the latest ﬁrmware

version.

Settings

WLAN Name: "Wifi 001"

Enter the following address into your FTP client:

ftp://XXX.XXX.X.XXX:XXXX

II Start

11 12

4. Uploading Photos and Videos via a USB Drive

① Insert a USB drive into the frame, and wait for seconds, the frame will let you

know when the USB drive is successfully connected.

②Enter the Photo or Video library, click USB and you will see all the photos or

videos stored in the USB drive.

③Click the More icon in the upper right corner and select the photos or videos

you would like to import to the internal memory of the frame.

④Click the Share icon at the top then choose OK to import the photos or videos.

⑤Your photos or videos will be received in seconds, you can check the photo or

video library on the frame.

Note:

• If you have too many ﬁles stored in the USB drive, it will take more time to read.

• The system will protect and lock the USB drive if there is no action after the USB

drive has been plugged in for a while. To activate it, you need to take it out and

plug it in again.

• Please remove all your external devices when you reset the photo frame.

All files

Internal Storage

photo

SD Card

USB

Favorites

User 1

Import

Import files to memory

Cancel OK

Selected 215

Note: The above screen shot is for reference, please update to the latest ﬁrmware

version.

5. Uploading Photos and Videos via an microSD Card

① Insert a microSD card into the frame, and wait for seconds, the frame will let you

know when the microSD card is successfully connected.

② Enter the Photo or Video library, click the microSD card and you will see all the

photos or videos stored in the microSD card.

③ Click the More icon in the upper right corner and select the photos or videos you

would like to import to the internal memory of the frame.

④Click the Share icon at the top then choose OK to import the photos or videos.

⑤Your photos or videos will be received in seconds, you can check the photo or

video library on the frame.

Note:

• Max supports a 32GB microSD card.

• If you have too many ﬁles stored on the microSD card, it will take more time to read.

13 14

DELETING PHOTOS AND VIDEOS

1. Deleting Files in the Photo or Video Library

①Enter the Photo or Video library and choose Internal Storage, you will see all

the photos or videos stored in the internal memory.

②Click the More icon at the upper right corner, and select the photos or videos

you would like to delete from your frame.

③Click the Delete icon at the top then choose OK to delete the photos or videos.

2. Deleting Files on a Slideshow

①When the photos or videos are displayed on the screen, click the photo or video

you would like to delete.

②Click the Delete icon on the menu below, then choose OK to delete the photos

or videos.

3. Deleting Files in Album Settings

Delete all the photos from internal storage.

3. PC Control

The PC Control feature helps to upload photos and videos from a computer.

To upload ﬁles, please make sure your frame and your computer are on the same

Wiﬁ network. The Wiﬁ status is shown on the screen.

Click Start and enter the FTP address on your computer to upload ﬁles (please

refer to the UPLOADING PHOTOS AND VIDEOS section), and click Stop to end.

4. Wiﬁ

You can choose the Wiﬁ network you would like to connect to on the list.

5. Album Settings

• Full Screen

Turn on this setting to make the photo displayed in full screen.

• Slideshow

You can set Slideshow time to make the frame automatically displays photos after

a period time of inactivity.

• Slideshow Mode

You can choose either Sequential or Random mode to display photos.

• Slideshow Interval

You can set Slideshow Interval to adjust the duration of each photo displays.

• Slideshow Transition Eﬀect

You can choose the eﬀect of slideshow transition.

• Delete Photos

Delete all the photos from internal storage.

• Restore default settings

It will remove all your user info, customized settings and ﬁles on your frame.

• The system will protect and lock the microSD card if there is no action after the

microSD card has been inserted for a while. To activate it, you need to take it out

and insert it again.

• Please remove all your external devices when you reset the photo frame.

SETTINGS MENU

1. Device Info

You can check the Frame ID and the app information.

2. User Management

Turn on/oﬀ the Accept New Users button to receive or reject new user requests.

You can see and manage the bound users under the Users. Choose the account

you want to manage, and a submenu will allow you to view the account’s photos,

remark name, delete user and delete user & photos.

Accept or refuse the New User Requests under the Pending User Requests.

15 16

6. System Settings

• Sound

You can adjust the media volume.

• Display

①Brightness

You can adjust the brightness of the screen.

②Suspended ball

Turn on this button, a suspended ball will appear on the screen. It is a quick

navigation key to help you easily go to the Home page and adjust the volume.

③ Motion Sensor

Turn on the motion sensor, the screen of the photo frame will automatically

turn oﬀ when motion is not detected in a certain period of time. The screen will

wake when motion is detected or someone passes by it.

④ Auto-rotate screen

Turn on this button, the display will automatically adjust to either landscape or

portrait position according to the frame placement.

• Date and Time

You can set the date and time according to your preference.

• Language: English, Deutsch, Español, Français, Italiano, 日本語，简体中文

Choose the system language.

7. Auto On & Oﬀ

You can set the Auto-On/Oﬀ time, as Sleep Schedule, to make the display

automatically turn on and oﬀ at a speciﬁc time.

When your frame is in the sleep mode, press the power button on the back to

awake the display.

8. Factory data reset

① Please disconnect your frame to Wiﬁ ﬁrst.

②Uncheck the "Delete all users and restore the device to inactive".

③Click OK to reset your frame.

Note: If the photo frame works abnormally or crashes, press and hold the power

button for about 10 seconds to force it to shut down, and then turn it back on.

FAQ

1. Does this frame have to be plugged in all the time?

Yes, this frame is required to be plugged into an AC outlet to function. It has no

built-in battery.

2. Does this frame have to be Wiﬁ connected to work or just in the setup process?

This frame needs to connect to a Wiﬁ network for setup, receiving new photos/

videos, receiving user requests and software updates. Other than that, the frame

can play photos or video without a Wiﬁ connection.

3. Why this frame cannot connect to Wiﬁ?

It supports only 2.4GHz Wiﬁ networks. Select the Wiﬁ network you would like to

connect to and enter the password correctly if required. If your Wiﬁ network is not

on the list, restart your router or move your frame closer to your router, wait for

seconds and check it again.

4. Can this frame be hung on the wall?

No, this frame can't be hung on the wall. You can put it on a desk, nightstand, or shelf.

5. Can I place the frame in a portrait or landscape position?

You can place the frame horizontally or vertically. No matter what the frame

orientation is, you will see photos displayed in landscape orientation.

6. Where can I ﬁnd the Frame ID?

Frame ID is a 6-digit series number which can be found in your Frame. Go to

Settings → Device Info.

7. Why I cannot bind my frame via the app?

Please note that there is a diﬀerence in the binding process.

If you are the frame owner or the ﬁrst to bind the frame, please follow the

instructions "Binding Your Frame via the App" to bind the frame.

If you are not the frame owner, please follow the instructions "Inviting Others to

Bind Your Frame via the App" to bind the frame. After receiving a binding request,

the frame owner will need to operate on the photo frame and click "Accept" under

Andere Handbücher für Smart 10

Inhaltsverzeichnis

Andere Faminode Digitaler Bilderrahmen Handbücher

Faminode

Faminode Smart 10 Bedienungsanleitung

Beliebte Digitaler Bilderrahmen Handbücher anderer Marken

LENCO

LENCO DF-830 Bedienungsanleitung

NIX

NIX Advance X10G Bedienungsanleitung

Nextar

Nextar N7S-100 Bedienungsanleitung

Sungale

Sungale TD350A Bedienungsanleitung

texet

texet DPF-830 Montageanleitung

Philips

Philips SPF2017 Bedienungsanleitung

Philips

Philips SPF1327 Bedienungsanleitung

Philips

Philips SPF7010/10 Bedienungsanleitung

Digital Spectrum

Digital Spectrum MemoryVue MV-1500 Bedienungsanleitung

ViewSonic

ViewSonic VFM1042-52 Bedienungsanleitung

YURAKU

YURAKU YUR.PHOTO 7B4C Bedienungsanleitung

Denver

Denver PFF-710WHITE MK2 Bedienungsanleitung

Pandigital

Pandigital PAN8000DWPCF1 Bedienungsanleitung

Rekam

Rekam Deja View HD-850 Bedienungsanleitung

Majestic

Majestic DF 918HD MP3 Bedienungsanleitung

ViewSonic

ViewSonic DPF8-CAM Bedienungsanleitung

Philips

Philips SPF2527 Bedienungsanleitung

Digital Foci

Digital Foci Image Moments IMT-063 Bedienungsanleitung