Fanmaster PESH30 Bedienungsanleitung
FA NM A ST E R
cooling heating ventilation extraction
INSTRUCTION MANUAL
MODEL: PESH30
PORTABLE ELECTRIC SPACE HEATER
TO PREVENT SERIOUS INJURY, READ & UNDERSTAND ALL WARNINGS &
INSTRUCTIONS BEFORE USE. PLEASE KEEP THIS DOCUMENT FOR YOUR RECORDS
FOR INDUSTRIAL USE ONLY
FOR YOUR INFORMATION
Thank you for purchasing a Fanmaster electric space heater. Please read this
instruction manual carefully before using this heater.
Disclaimer:
Fanmaster reserves the right to make alterations to specications, quantities,
dimensions, for production or other reasons, subsequent to publication.
While we believe the information is accurate and complete, we make no warranty
or representation for any particular purposes. The information is offered in good faith
and with the understanding that any use of the units or accessories in breach of the
directions and warnings in this document is at the sole discretion and risk of the user
Disposal Guidelines:
Do not dispose of this product with general household waste. This product must be
disposed according to the laws governing Waste Electrical and Electronic Equipment.
If required, contact your local authorities for information regarding the available
disposal facilities.
1. GENERAL SAFETY RULES & WARNINGS
• PLEASE READ INSTRUCTIONS CAREFULLY.
• PLACE INSTRUCTION MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. DO NOT ALLOW
ANYONE WHO HAS NOT READ THESE INSTRUCTIONS TO ASSEMBLE, ADJUST OR OPERATE THIS
HEATER.
• IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR EXPLOSION
MAY RESULT IN CAUSING PROPERTY DAMAGE, SERIOUS INJURY OR LOSS OF LIFE.
• FAILURE TO COMPLY WITH THE PRECAUTIONS AND INSTRUCTIONS PROVIDED WITH THIS
HEATER, CAN RESULT IN DEATH, SERIOUS INJURY AND PROPERTY LOSS OR DAMAGE FROM
HAZARDS OF FIRE, EXPLOSION, BURN, AND/OR ELECTRICAL SHOCK.
• ONLY PERSONS WHO CAN UNDERSTAND AND FOLLOW THE INSTRUCTIONS SHOULD USE OR
SERVICE THIS HEATER. IF YOU NEED ASSISTANCE OR REQUIRE HEATER INFORMATION SUCH AS
AN INSTRUCTION MANUAL, LABELS, ETC. CONTACT FANMASTER.
• DO NOT STORE OR USE GASOLINE, PETROL OR ANY OTHER FLAMMABLE OR COMBUSTIABLE
VAPORS AND LIQUIDS IN THE VICINITY OF THIS HEATER.
• FIRE, BURN, INHALATION, AND EXPLOSION HAZARD. KEEP SOLID COMBUSTIBLES, SUCH AS
BUILDING MATERIALS, PAPER OR CARDBOARD, A SAFE DISTANCE AWAY FROM THE HEATER
AS RECOMMENDED BY THE INSTRUCTIONS. NEVER USE THE HEATER IN SPACES WHICH DO OR
MAY CONTAIN VOLATILE OR AIRBORNE COMBUSTIBLES, OR PRODUCTS SUCH AS GASOLINE,
SOLVENTS, PAINT THINNER, DUST PARTICLES OR UNKNOWN CHEMICALS
• NOT FOR DOMESTIC OR RECREATIONAL VEHICLE USE
• THE ELECTRICAL SYSTEM TO WHICH THE APPLIANCE IS CONNECTED MUST COMPLY WITH
LOCAL REGULATIONS. A RESIDUAL-CURRENT DEVICE (RCD) MUST BE INSTALLED.
• UNPLUG THE APPLIANCE BEFORE PERFORMING ANY MAINTENANCE OPERATIONS.
• ALWAYS CHECK THE POWER CABLE BEFORE USING THE APPLIANCE. IT MUST NOT BE BENT,
TAUT, STRETCHED, CRUSHED OR ANY WAY DAMAGED.
• IF THE POWER CORD AND/OR PLUG IS DAMAGED, IT MUST BE REPLACED BY FANMASTER, A
SERVICE AGENT OR A QUALIFIED PERSONS.
• DO NOT COVER THE FAN HEATER
• THE FRONT OUTLET IS VERY HOT DURING OPERATION. DO NOT TOUCH! BURN DANGER.
• DO NOT LEAVE THE HEATER UNATTENDED WHEN IN USE.
• NEVER USE THE HEATER WITH WET HANDS OR WHEN EITHER THE HEATER OR THE POWER CABLE
IS WET.
• CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE HEATER.
• THE HEATER IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WITH REDUCED
PHYSICAL, SENSORY OR MENTAL CAPABILITIES, OR LOCK OF EXPERIENCE & KNOWLEDGE.
FOR YOUR INFORMATION
2. PRODUCT DESCRIPTION & SPECIFICATIONS
PRODUCT DESCRIPTION
Industrial electric space/fan heater.
SPECIFICATIONS
MODEL PESH30
Heat Output 30 KW
102,360 BTU
Air Flow (L/s) 261
Control settings 1 x Fan setting
2 x Heat settings
Settings (KW) Fan Only/15/30
Voltage (V/Hz) 415/50
Plug 5 Pin 50amp
Adjustable
thermostat 70’C
Net Weight (kg) 35
Dimensions (mm) 652(L)*617(W)*1018H)
SAFETY DEVICES
• Self Resetting Thermostat - this will automatically disconnect the power to the
heater at a pre-set overheat temperature (90’C). After cooling down it will reset &
turn on again. If this occurs, investigate what is causing the heater to overheat.
• Time Delay Thermostat - the fan will continue to run once the heating elments
have been turned off.
3. GETTING TO KNOW YOUR HEATER
Remove the heater from the carton. If the heater is damaged, please contact
Fanmaster or where you purchased the heater from.
2. PRODUCT DESCRIPTION & SPECIFICATIONS
1. Thermostat Knob
2. Switch Knob
3. Handle
4. Adjustment Knob
5. Wheels
6. Front grille
7. Fan Motor
3. GETTING TO KNOW YOUR HEATER - CONTINUED
• Left Knob = switch control settings
• Right Knob = thermostat control
The rotary switch (left knob) has 3 settings & 4 positions:
• OFF
• 1st Setting: Fan Only
• 2nd Settting: Heating 15KW
• 3rd Setting: Heating 30KW
The adjustable thermostat control (right knob) can be turned 0 to 270 degree, you
can control the room temperature between 0~70oC.
CONTROL PANEL
First time use, you may notice a slight emission of smoke. This is quite normal & it will
stop after a short time. The heating element is made of stainless steel & is coated with
a protection oil.
• Connect one wheel to the axle using ø8 xed plated, ø8 spring washer & wheel
cover & insert axle via the steel frame.
• Connect the second wheel as per above instructions, tighten the M8 nut
• Insert & align the packing plates at the top of the steel frame.
• Attach the steel frame to the heater body with the M8 x43.5 screws & adjustment
knobs.
• Attach the handle by using the 4 x M5x37 screws & nuts.
• Position the heater so it stands upright & is on a rm surface and at a safe
distance from wet environments and ammable objects.
• Connect the plug to the relevant power source.
• Set the thermostat control (left knob) to MAX & switch control (right knob) to the
highest setting and let the heater operate on full power for 5 to 10 mintues.
• Adjust the thermostat control (left knob) to required temperature.
• Once the room reaches the required temperature, the heating element will
cut-out. Once the ambient temperature decreases, the heating element will cut
back in. The fan heater now starts and stops automatically and thus keeps the
room temperature constant.
• Before switching off the heater, please turn the thermostat to MIN position & turn
the switch to fan position, let the appliance cool down for ve minutes then turn
off the heater and disconnet the plug.
• DO NOT TURN THE HEATER OFF FROM THE POWER SOURCE UNTIL COOLING THE
HEATER DOWN.
4. ASSEMBLY & OPERATING INSTRUCTIONS3. GETTING TO KNOW YOUR HEATER - CONTINUED
4. ASSEMBLY & OPERATING INSTRUCTIONS - CON
Angle Adjustment:
You can adjust the air outlet angle up to 20 degrees. Firstly tighten the adjustment
knobs then gently push down on the back end of the heater or front as per the
image below and adjust the direction as required. Do not touch or stand in front of
the heater)
5. CLEANING, MAINTENANCE & STORAGE4. ASSEMBLY & OPERATING INSTRUCTIONS - CON
• Before starting any maintenance task, shut down, unplug and let the heater cool
down for at least 15 minutes.
• Do not attempt any electrical repair yourself. If the heater needs service or repair,
contact Fanmaster or a qualied person.
• When cleaning, make sure that water does not enter the unit.
• Do not open the enclosure to clean the inner parts. Do not spray water into the
heater.
• Never use solvents, gasoline, toluene and similar aggressive chemicals to clean
the heater.
Regularly wipe the enclosure using a soft sponge or cloth. For very dirty parts, use a
sponge wetted with lukewarm water and a mild detergent, then dry using a clean
cloth. Regularly inspect the power cable: if worn, cracked or damaged have it
replaced by a qualied persons only.
Before storing the heater, make sure it is perfectly cool and dry. Cover the unit with a
blanket or tarp and store it in a dry, ventilated place.
6. WIRING DIAGRAM
Inhaltsverzeichnis
Andere Fanmaster Elektrische Heizung Handbücher
