Fantec HDC portable Bedienungsanleitung
Version 1.0
USER Manual
FANTEC
HDC Portable
USB
DC-IN
ON OFF•
Source 2•
Object 2
•
Object 1
•
Source 1•
ENT RESET
ESC•MUTE
SATA HDD
SATA HDD
Source 2
•
Object 2
•
Object 1
•
Source 1
•
ENT RESET
ESC•MUTE
Source 2
•
Object 2
•
Object 1
•
Source 1
•
ENT RESET
ESC•MUTE
2.5”IDE
2.5”IDE
3.5”IDE
3.5”IDE
1. Feature
IDE/SATA HDD portable copy-station for all 2.5”&3.5” HDD.
USB2.0 Raid bridge external station for all 2.5”&3.5” HDD.
Duplicator mode: Copy/Compare/Pre-scan/Erase.
Raid mode: Raid0/Raid1/Normal/JBOD.
Easy handling over display
Stand alone usage without PC(Duplicator mode).
2. Operating System
Windows 98SE/2000/XP/Vista, Mac, Linux
3.Package Contents
1 x Copy station
1 x USB cable
1 x Power supply
1 x AC cable
2 x IDE cable
2 x ATX-4pin power cable
2 x 3.5” to 2.5” IDE converter
Protection cap for connectors
1 x User manual
4. The Button Function
Button Function
▲pU
▼nwoD
ENT Enter
ESC Cancel
RESET Reset station
MUTE Mute the alarm sound
6. System Mode
(1). Duplicator Mode
1. Copy HDD
Clone the boot sectors from the source HDD to the object HDD.
2. Compare HDD
Compare the sectors of the source HDD to the object HDD.
3. Pre-scan
Pre-scan the bad sectors of the source HDD.
4. Erase
Erase all the data of the object HDD.
5. Rescan BUS
Rescan all HDD which connected to the satation.
6. Source Size
Show the capacity of the source HDD.
7. Setup
Show the system information.
(2). USB2.0 Raid Bridge Mode
Connect the station to your HDD(2 bay), the raid mode as following,
1. RAID0(Stripping mode)
Maximum speed through two simultaneous working HDD.
2. RAID1(Mirroring mode)
Maximum security by HDD mirroring.
3. JBOD(Spanning mode)
Two HDD combined to one single HDD(no raid).
4. Normal
Two independent HDD.
Note: If users want to discontinue the Copy/ compare/ pre-scan during working
status, please press the" ESC" button for 3 seconds for stopping them.
5. Duplicator operating
(1) Press the ▲and▼button to select the Menu, and press the ENT
Button to enter the next step.
(2) For example, the display show the HDD copy information.
6. Raid operating
(1) Press the ▲and▼button to change the raid mode.
(2) Press the ENT button to enter the next step.
(3) Press the ENT button to ensure change the mode.
(4) Show the raid information.
5Click the My Computer , right-clicking pop-up menu, click the Options
Management , select the Computer Management , then you can operate the hard
disk in your PC.
The hard disk information as following,
Normal mode
JBOD mode
RAID0 mode
RAID1 mode
Inhaltsverzeichnis
Andere Fantec Computerzubehör Handbücher
