Fantec 4KS6000 Bedienungsanleitung

1. Introduction

1.1 Foreword

Thank you for choosing the FANTEC 4KS6000. We wish you a lot of fun and enjoyable

entertainment with this Android media player.

(Due to the regular development of our products, these instructions may differ from the product

or the software.)

This player has the following functionality:

A/V output

- HDMI 2.0 connection.

- Composite video and audio connection.

- Optical S/PDIF connection.

Movie playback

- Supports the popular video file formats

- Fast forward and reverse

Music playback

- Supports all popular music file formats and codec

- Fast forward and reverse

Photo playback

- Supports all popular image file formats

- Zoom function

Network Properties

- Transmission via network (10/100 MBit) and WLAN 2,4Ghz

- Shared file access to the player via Samba server

Copy files

- Supports copying & moving files between USB devices, memory cards and the network

(for example, using the File Manager app)

USB 3.0 & USB 2.0 support

- 1 x USB 3.0 HOST, 2 x USB 2.0 HOST connectors (for USB storage devices)

Note: All information in this manual was complete and the correct at the time of

publication. However, as the product continues to evolve, your device’s software may

have a slightly different appearance of functionality than described in this guide.

1.2 Packaging content

part

amount

player

remote control

battery remote control

1 set

power adapter

manual

warranty card

(Note: the current packaging content may vary.)

1.3 Warnings

To use the FANTEC 4KS6000 media player safely and efficiently, please read the manual

first.

1.3.1 Usage Notice

- Do not try to change the hardware or firmware of the device, as this will void the

warranty.

- Do not allow the player to come into contact with water or other liquids. If by mistake

water should splash on the player, please use a dry cloth to absorb the spatter.

1.3.2 Power supply

- The power supply of the player via a 5V plug power supply.

- In order to use the player, please connect the supplied power adapter to provided

power connector. Make sure that the cable of the power supply unit cannot be damaged

or pinched during installation.

- To avoid electric shock, disconnect the power adapter from the power outlet before

cleaning.

- Never connect the AC adapter to the player when it is in a damp or dusty environment.

Always use the original supplied AC adapter.

1.3.3 Radio interference

- If you are not specially shielded, almost all electrical appliances are disturbed by radio

interference. Under certain circumstances, your player could be disturbed.

- The design of this player conforms to and is subject to the CE standard.

Regulations:

(1) This player does not produce harmful radio emissions.

(2) The player may be impaired in function by radio radiation from other devices.

1.3.4 Repair

- In case of a problem, please contact FANTEC Service.

- Never open the device in order to correct any errors yourself.

- Do not try to repair the player or change the design, as this will void your warranty.

1.3.5 Disposal of the player

- If you want to throw away your player, please make sure that the device is disposed

properly. In some countries, regulations apply to the disposal of electrical equipment.

Please note the local legislation.

1.3.6 Additional

Electronic devices are sensitive. Avoid shocks and jolts, especially when the unit is in

operation, do not force the knobs and keep them away from magnetic fields.

1.4 View

Front view

1. Power switch with status LED (standby: red, switched on: blue)

2. IR receiver

Back View

1. WLAN antenna

6. HDMI connection

2. S/PDIF optical audio output

7. LAN connection

3. Video output (composite)

8. Upgrade button

4. Audio (left stereo channel)

9. 5V DC IN power connection

5. Audio (right stereo channel)

Seitenansicht

1. USB 3.0 connection

3. USB 2.0 connection

2. USB 2.0 connection

4. SD card reader

1.5 Connection

Make the wished audio and video connections with your entertainment system. The

easiest way is with an HDMI cable, as on this cable usually image and sound are

transmitted from the player to the TV.

Once you have the power supply, the player will usually turn itself on automatically (this

behaviour can be turned off in the Android settings under „HDMI settings“ →„START

MODE“)

Insert the batteries into the remote control to operate the player.

1.6 First steps

If you are using the player for the first time on your TV, make the following settings: *

Language menu, * Network settings, * Screen size.

1.6.1 Setting the system language of the device

The following settings can be performed better with the support of a USB mouse. You

can also activate mouse support for the remote control by pressing the „mouse“ icon on

the remote control to turn it on or off. A mouse via USB is more familiar.

If the menu language is not yet set to English, please proceed as follows:

a) Select the settings icon in the main menu:

b) Then go right to the more icon:

c) You are now in the Android settings. Now set your preferred language under

„Language & Input“ → „Languages“ → „Add a language“ e.g. „English“.

d) Remove the unnecessary language with the symbol: in

the upper right corner.

You can change these settings at any time in the Setup menu.

To set up the keyboard layout, please read point 4. FAQ

1.6.2 LAN connection

For the LAN connection you need a network cable (not included).

Connect the LAN port of the player to a port on your router, switch or hub. Under

„Settings“ → „Network“ you can determine the IP address of the LAN connection. To edit

the network settings, go to „Settings“ → „More“ → „Ethernet“.

1.6.3 Connecting to a WiFi network

To use your WiFi you need to know the access information.

Under „Settings“ → „Network“ → „WiFi“ you can determine the IP address of the WiFi

connection. To edit the settings, please go to „Settings“ → „More“ → „WiFi“ and mark

your WiFi. Then press the OK button for approx. 3 seconds to open the dialog for

changing the network settings.

1.6.4 Adjusting the screen size

Under „Settings“ → „Display“ → „Screen Size Position“ you can adjust the screen size

and orientation.

2. Operating instructions

2.1 Remote control

Below you will find details on the key assignment and the functions:

Taste

Funktion

Switch the device on or off

Programmable keypad

Switch 3D mode on or off

Decrease or increase the volume

Play or pause a file

Call next / previous file or jump

forward / backward

Activates the screen mouse

Return to the previous menu or exit

from the running APP / application

Use the arrow keys to select menu

options, press OK to confirm

Call up the start screen

Call options menu, if supported by the

respective APP.

Show / hide option menu during

playback.

Switching between NTSC, PAL, 480P,

576P, 720P, 1080i/P, 21060P

Delete, if supported by the APP /

application

Enter channel numbers or numerical

values directly

Set subtitle options

Switch soundtrack (movie language)

2.2 Setting programmable keypad

1. Press the SET button in the TV area for 3 seconds until the red LED lights steadily.

Now you are in programming mode.

(If no key is pressed within 15 seconds, the programming mode ends

automatically.)

2. Place the media player remote control about 3 cm in front of the IR receiver of

your TV remote control.

3. Press the grey power button in the TV zone: the red LED will start flashing. Now

press the power button of your TV remote control: after the red LED has flashed

3 times, the programming is completed successfully. Now you can use the

remote control of the FANTEC 4KS6000 to switch your TV on and off.

4. If you want to assign additional keys, repeat steps 1 to 3.

5. Press the SET button to exit the programming mode.

3. Functions

The settings menu allows personalization and configuration of presets.

3.1 Settings menu

To select a setting option, proceed as follows:

Wählen Sie das Einstellungssymbol auf dem Home-Bildschirm:

Use the right / left navigation keys to select an option, and then press OK.

Inhaltsverzeichnis

Andere Fantec Medienplayer Handbücher

Fantec

Fantec MM-HDRTV Bedienungsanleitung

Fantec

Fantec MM-CH26US Bedienungsanleitung

Fantec

Fantec TV-FHDS Bedienungsanleitung

Fantec

Fantec 4KS7000 Bedienungsanleitung

Fantec

Fantec XMP600 + WiFi Bedienungsanleitung

Fantec

Fantec RayPlay U3 Bedienungsanleitung

Fantec

Fantec MM-CH26US Bedienungsanleitung

Fantec

Fantec 3DAluPlay Bedienungsanleitung

Fantec

Fantec 3DS4600 Bedienungsanleitung

Fantec

Fantec TV-LHD Bedienungsanleitung

Fantec

Fantec Full HD Media player Bedienungsanleitung

Fantec

Fantec MM-CH36US Bedienungsanleitung

Fantec

Fantec MM-FH36US Bedienungsanleitung

Fantec

Fantec P2700 Bedienungsanleitung

Fantec

Fantec MM-CR35US Bedienungsanleitung

Fantec

Fantec 4KS7800Air Bedienungsanleitung

Fantec

Fantec R2750 Bedienungsanleitung

Fantec

Fantec R2700 Bedienungsanleitung

Fantec

Fantec P3700 Web Bedienungsanleitung

Fantec

Fantec P2300 Bedienungsanleitung

Fantec

Fantec 3DFHDN Bedienungsanleitung

Fantec

Fantec QB-35US3 Bedienungsanleitung

Fantec

Fantec 3DS4600 Bedienungsanleitung

Fantec

Fantec XMP600 + WiFi Bedienungsanleitung

Beliebte Medienplayer Handbücher anderer Marken

Visual Land

Visual Land Impulse Bedienungsanleitung

limHD

limHD 200i Bedienungsanleitung

Transcend

Transcend DMP10 Bedienungsanleitung

Philips

Philips GoGear Muse SA2MUS08 Bedienungsanleitung

Dune HD

Dune HD Duo 4K Bedienungsanleitung

IAdea

IAdea HMP-505S Bedienungsanleitung

Camos

Camos MMS-1000 Bedienungsanleitung

Energy

Energy 75 Series Bedienungsanleitung

Z3 Technology

Z3 Technology DME-03 Bedienungsanleitung

Sony

Sony SVR-2000 Benutzerhandbuch

Meicheng

Meicheng HD-1080K12 Bedienungsanleitung

DENAFRIPS

DENAFRIPS ARCE Bedienungsanleitung

Topaz

Topaz CMS Media Player Gebrauchsanweisung

InFocus

InFocus LightCast Bedienungsanleitung

IconBiT

IconBiT XDS1003D Bedienungsanleitung

Quanmax

Quanmax QDSP-2090 Series Bedienungsanleitung

Samsung

Samsung MP-80S Bedienungsanleitung

Trigon Elektronik

Trigon Elektronik CHRONOLOG Bedienungsanleitung