Fanvil A10 Bedienungsanleitung
www.fanvil.com
A10/A10W/A10-E/A10W-E
SIP Intercom
Quick Installation Guide
A10/A10W/A10-E/A10W-E
Package Contents
1
SIP Intercom
Quick Installation
Guide
Screw and Tool
Physical Specification
2
Device size 87.56 x 87.56 x 30mm
Device size 87.56 x 87.56 x 21.5mm
A10/A10W/A10-E/A10W-E 3 button
1) Panel
Speaker
www.fanvil.com
A10/A10W/A10-E/A10W-E
SIPIntercom
QuickInstallation Guide
A10/A10W/A10-E/A10W-E
Connector
Mounting
Template
Wall hanging
in 86 boxes
A10/A10W
A10-E/A10W-E
Reserved function key
Reserved function key
Call button
2) Interface Description
On the back of the device, there is a row of terminal blocks for connecting
the power supply, indoor switch. The connection is as follows：
①
①
②
②
④⑤ ③
③
Serial
number Description
Ethernet interface: standard
RJ45 interface, 10/100M
adaptive, it is recommended
to use five or five types of
network cable
Power interface: 12V/1A input
A set of RS485
A set of short-circuit output
interfaces
④
⑤
3) Installation Diagram
Cover Main Body Cover Main body Back Shell
1) Wall Mount: Attach the installation dimension drawing to the position to be
installed, use the electric drill to punch the hole in the 2 screw holes marked,
and use the hammer to drive the screw into the drilled hole.
A set of short-circuit input interfaces
（Wall hanging） （in 86 boxes）
A10-E/A10W-E
A10/A10W
2) Remove the cover.
3)Wall Mount: Align the bottom case with the position of the screw hole that was
previously punched on the wall, and screw in the two screws with a screwdriver to
fix the bottom case to the wall.
Built-in: Place the bottom case into the previously opened groove and screw in the
two screws with a screwdriver to secure the bottom case to the wall.
4)Test whether there is electricity by doing the following:
Long press DSS key for 3 seconds(after power-on for 30 seconds), and when the
speaker beeps rapidly, press DSS key again quickly, the beeps stop ,the intercom will
report the IP address by itself. If the work is normal, continue with the next steps.
5)Cover the cover removed in step 2.
Method 2:
Long press DSS key for 3 seconds(after power-on for 30 seconds), and when the
speaker beeps rapidly, press DSS key again quickly, the beeps stop ,the intercom will
report the IP address by itself.
4) Searching SIP Intercom
There are two methods as shown below to search the device.
Methods 1:
Open the iDoorPhone Network Scanner, click the Refresh button to search the device
and find the IP address.
（Download address http://download.fanvil.com/tool/iDoorPhoneNetworkScanner.exe)
172.18.70.55 A10 A10
Built-in: Attach the installation dimension drawing to the position to be installed,open
a groove of the same size according to the size, use the electric drill to punch the hole
in the 2 screw holes marked, and use the hammer to drive the screw into the drilled
hole.
In addition, device provides the device surface DSS key operation to switch IP
address acquisition mode:
In the standby mode, long-press the speed dial button for 3 seconds and the beep
will last for 5 seconds. Within 5 seconds, press the speed dial button three times
quickly to switch to the network mode.
If there is no IP at present, switch to the default static IP (192.168.1.128).
Then switch to DHCP mode when it is the default static IP (192.168.1.128).
When DHCP gets to IP, then do not switch and report the IP directly.
Report the IP after the successful switch.
5) SIP Intercom Configuration
Step 1: Log in the WEB admin interface of the device
Input IP address (e.g.http://172.18.70.55) into address bar of PC’s web browser.
The default user name and password are both admin.
Step 3: Add SIP Account
Set SIP server address, port, user name, password and SIP user with assigned SIP
account parameters. Select <Activate>, click <Apply> to take effect.
Step 2: WIFI Settings (A10W/A10W-E only)
Click "Network" --WIFI Settings, turn on WiFi, in the corresponding box, fill in the
corresponding wifi name and password, click "Add" wifi information added to the list.
After the wifi information is entered, click Submit.
A10
Step 4: Set DSS key
Set the speed dial parameters of the call button. The reserved function key can also
be configured on the web page, click “Apply”to save this setting. Type: Memory Key.
Subtype: Speed Dial.
Value: The DSS Key will dial to this Number . Click the + at the back to increase the
forwarding number, and when the first number does not work, go to call the
next number, and each shortcut key can add up to 8 transfer numbers.
Line: Working line.
Step 5: Set the Intercom parameters
Step 6: Set the Security Function
Set of short-circuit input and output settings.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure requirement set forth for an uncontrolled
environment. The transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Andere Handbücher für A10
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Fanvil Gegensprechanlage Handbücher
Fanvil
Fanvil i16S Bedienungsanleitung
Fanvil
Fanvil Y50r-Y Bedienungsanleitung
Fanvil
Fanvil V65 Bedienungsanleitung
Fanvil
Fanvil i23S Bedienungsanleitung
Fanvil
Fanvil i10 Bedienungsanleitung
Fanvil
Fanvil i33V Bedienungsanleitung
Fanvil
Fanvil i51W Bedienungsanleitung
Fanvil
Fanvil i10V Installations- und Benutzerhandbuch
Fanvil
Fanvil i51W Bedienungsanleitung
Fanvil
Fanvil i66 Bedienungsanleitung
Fanvil
Fanvil i12-01 Bedienungsanleitung
Fanvil
Fanvil i20 Bedienungsanleitung
Fanvil
Fanvil i18 Bedienungsanleitung
Fanvil
Fanvil i16V Bedienungsanleitung
Fanvil
Fanvil i33V Bedienungsanleitung
Fanvil
Fanvil i55A&i55A-Z Bedienungsanleitung
Fanvil
Fanvil I20-T Bedienungsanleitung
Fanvil
Fanvil i10 Installations- und Benutzerhandbuch
Fanvil
Fanvil i51W Bedienungsanleitung
Fanvil
Fanvil i55A Bedienungsanleitung
